Kaiwei Wang

Dr. Kaiwei Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
MDMiaoyi Deng
Miaoyi Deng
XXXiangbing Xie
Xiangbing Xie
JZJingbo Zhuo
Jingbo Zhuo
YHYahui He
Yahui He
KWKaiwei Wang
Kaiwei Wang
The strength-formation mechanism for industrial-construction residue cement stabilization of crushed aggregate (IRCSCA) is not clear. To expand the application range for recycled micro-powders in road engineering, the dosages of eco-friendly hybrid recycled powders (HRPs) with different proportions of RBP and RCP affecting the strengths of cement-fly ash mortar at different ages, and the strength-formation mechanism, were studied with X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the early strength of the mortar was 2.62 times higher than that of the reference specimen when a 3/2 mass ratio of brick powder and concrete powder was mixed to form the HRP and replace some of the cement. With increasing HRP content substituted for fly ash, the strength of the cement mortar first increased and then decreased. When the HRP content was 35%, the compressive strength of the mortar was 1.56 times higher than that of the reference specimen, and the flexural strength was 1.51 times higher; XRD and SEM studies of the hydrated cement mixed with HRP showed that the amount of CH in the cement paste was reduced by the pozzolanic reaction of HRP at later hydration ages, and it was very useful in improving the compactness of the mortar. The XRD spectrum of the cement paste made with HRP indicated that the CH crystal plane orientation index R, with a diffraction angle peak of approximately 34.0, was consistent with the cement slurry strength evolution law, and this research provides a reference for the application of HRP to produce IRCSCA.

13 October 2023 in Journal of Molecular Modeling
Verified
Journal Article
Closed access
PDF file
XXXiangbing Xie
Xiangbing Xie
KWKaiwei Wang
Kaiwei Wang
MBMeng Bao
Meng Bao
GLGuanghui Li
Guanghui Li
JSJinggan Shao
Jinggan Shao
YHYahui He
Yahui He

11 November 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
KWKaiwei Wang
Kaiwei Wang
XXXiangbing Xie
Xiangbing Xie
GLGuanghui Li
Guanghui Li
JSJinggan Shao
Jinggan Shao
MBMeng Bao
Meng Bao
YHYahui He
Yahui He
Asphalt concrete pavement is gradually being adopted in cement concrete pavement repair and paving due to its short construction period and low vibration to aircraft. However, the performance of the interlayer binder is the critical factor affecting the paving effect. For the preparation of interlayer high-performance emulsified asphalt suitable for airport pavement, the type and dosage of modifier and emulsifier were taken as factors and levels for the orthogonal test. Combined with the evaporation residue, softening point, penetration, ductility, and Engla viscosity indexes, the range analysis was carried out to determine the optimal dosage of modifier and emulsifier. Furthermore, the dynamic shear rheology test (DSR), fluorescence microscope test, TG-DSC test, and shear and tensile tests were used to evaluate the technical properties of SBS/SBR modified emulsified asphalt. These results showed that the best blending mass ratio of SBS/SBR modified emulsified asphalt is 1.5% SBS + 3% SBR + 1% emulsifier. Temperature sweep at 48°C, compared with SBS/SBR modified emulsified asphalt, the complex shear modulus (G) of SBS/SBR modified emulsified asphalt increased by 71% and 75%, while the rutting factor(G/sinδ) increased by 83% and 86%, respectively, which indicates that its shear deformation resistance and rutting resistance have been significantly improved. The Han curve indicates that the SBS/SBR modifier has excellent compatibility with asphalt and can maintain a stable state at a lower frequency. Before demulsification, SBS/SBR modifier and emulsified asphalt formed a stable spatial network structure. After demulsification, the continuous phase and the dispersed phase were more closely integrated, so that the emulsified asphalt exhibited better bonding performance. At different temperatures, by increasing the spraying volume, the shear and tensile strength of SBS/SBR modified emulsified asphalt increased first and then decreased. At 25°C, the maximum shear and tensile strengths are 0.86 MPa and 0.65 MPa. This study demonstrated that SBS/SBR modified emulsified asphalt formed a stable spatial network structure, giving it excellent technical properties, and can be widely used for tack coat on airport pavement.

21 September 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
MDMiaoyi Deng
Miaoyi Deng
XXXiangbing Xie
Xiangbing Xie
KWKaiwei Wang
Kaiwei Wang
MWMingwei Wang
Mingwei Wang
JSJinggan Shao
Jinggan Shao
HWHui Wang
Hui Wang
The recycled powder produced in the process of crushing concrete and brick waste (C&BW) into recycled aggregate will cause environmental pollution. To realize the green full recycling of concrete and brick waste, the cement stabilization of crushed aggregate (CSCA) containing recycled brick-concrete composite micropowder (RBCP) and recycled brick-concrete composite aggregate (RBCA) is proposed. In this paper, RBCP, recycled brick-concrete composite fine aggregate (RBCFA), and recycled brick-concrete composite coarse aggregate (RBCCA) were the recycled materials from C&BW. The orthogonal test table was used to analyze the effects of the three recycled materials on the compaction characteristics, mechanical properties, and shrinkage behavior of CSCA at different dosages. The effects of RBCP, RBCCA, and RBCFA on the properties of CSCA are studied by variance analysis methods. On this basis, the micromorphology and the interface transition zone (ITZ) were studied for CSCA and the cement stabilization of crushed aggregate with RBCP, RBCFA, and RBCCA through scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), and the mechanism was revealed. The results indicate that the addition of RBCP and RBCA can increase the optimal water content while decreasing the optimal dry density of CSCA, and the influence of RBCCA on the optimal water content is greater than that of RBCFA. Three optimal composite replacement systems for CSCA, including 20% RBCP/20%RBCFA/40%RBCCA, are proposed and have the best mechanical and antishrinkage performance through the range analysis. Furthermore, the variance analysis test results show that RBCCA and RBCFA have the most significant effect on the compressive strength and shrinkage strain properties, while RBCP has the most significant effect on the bending tensile strength. It is found that RBCP played a filling effect and pozzolanic activity in the strength formation of CSCA. The SEM/EDS test shows that the CSCA with recycled materials produced the Ca/Si ratio in the interfacial zone between the cement paste and aggregate lower than the CSCA without recycled materials, the largest decline 52.83%. The research results of this paper can provide the potential application of RBCP and RBCA.