Within the paradigm of smart mobility, the development of innovative materials aimed at improving resilience against structural failure in lightweight vehicles and electromagnetic interferences (EMI) due to wireless communications in guidance systems is of crucial relevance to improve safety, sustainability, and reliability in both aeronautical and automotive applications. In particular, the integration of intelligent structural health monitoring and electromagnetic (EM) shielding systems with radio frequency absorbing properties into a polymer composite laminate is still a challenge. In this paper, we present an innovative system consisting of a multi-layered thin panel which integrates nanostructured coatings to combine EM disturbance suppression and low-energy impact monitoring ability. Specifically, it is composed of a stack of dielectric and conductive layers constituting the sensing and EM-absorbing laminate (SEAL). The conductive layers are made of a polyurethane paint filled with graphene nanoplatelets (GNPs) at different concentrations to tailor the effective electrical conductivity and the functionality of the material. Basically, the panel includes a piezoresistive grid, obtained by selectively spraying onto mylar a low-conductive paint with 4.5 wt.% of GNPs and an EM-absorbing lossy sheet made of the same polyurethane paint but properly modified with a higher weight fraction (8 wt.%) of graphene. The responses of the grid’s strain sensors were analyzed through quasi-static mechanical bending tests, whereas the absorbing properties were evaluated through free-space and waveguide-based measurement techniques in the X, Ku, K, and Ka bands. The experimental results were also validated by numerical simulations.
26 June 2024 in IEEE Transactions on Electromagnetic Compatibility
The availability of accurate analytical models for the prediction of microwave transmission through subwavelength metasurfaces is of particular interest in the design phase for performance optimization. To this purpose, this article proposes new analytical expressions of the effective admittance of both the inductive and capacitive screens. The effective capacitance of a periodic array of metal patches on a dielectric layer is obtained as a function of the effective inductance of the complementary surface made of a period array of square apertures on a metal plate. The effective inductance of a wire grid is given from the one of the equivalent mesh strip grid, performing the same transmission and reflection characteristics. The proposed formulations are applied to the prediction of the microwave transmission performances of the considered screen configurations. The obtained results are validated by comparison with the ones given by a full-wave numerical code and with data reported in the literature.