Department of Astronautics, Electrical and Energy Engineering (DIAEE) of Sapienza University of Rome, Research Center on Nanotechnology applied to Engineering of Sapienza University (CNIS), Roma, Italy
Prof. Marcello D'Amore
Department of Astronautics, Electrical and Energy Engineering (DIAEE) of Sapienza University of Rome, Research Center on Nanotechnology applied to Engineering of Sapienza University (CNIS), Roma, Italy
For pt. I see ibid., vol.38, no.2, p.127, 1996. The simulation model of a multiconductor dissipative line above a lossy ground, based on the exact formulation of the Maxwell equations, is proposed for a wide frequency range. The procedure is an extension of the analysis of single conductor configurations. The exact expression of the matrix modal equation of the line is first proposed, assuming that in the system there are as many dominant discrete modes of propagation as there are conductors. New expressions of the distributed series-impedance and shunt-admittance matrices are proposed, with reference to the definition of the wire-to-ground voltage. Moreover, an easy-to-implement simulation model is proposed for use in computer codes, based on the logarithmic approximation of the Sommerfeld integrals and Bessel functions. Applications are carried out in order to compare the results of the proposed procedure and of the Carson (1926) theory, with reference to a three-conductor line above a lossy groun
17 November 2017 in IEEE Transactions on Electromagnetic Compatibility
Low-terahertz field transmission through a graphene/dielectric laminate (GDL) is investigated by modeling each graphene/dielectric bilayer (GDB) as a homogeneous uniaxial anisotropic medium. The effective medium approximation is applied to define the transverse effective complex conductivity of the GDB, which is expressed as a function of the thickness and permittivity of the dielectric layer, and of the graphene sheet conductivity. The graphene/dielectric multilayered structure is modeled as an equivalent single layer (ESL), having the total thickness of the multilayer and characterized by the effective complex conductivity of the GDB. The model is applied to simulate two different sets of chemically doped graphene samples, characterized by measured values of the dc sheet resistance. The transmissivity, reflectivity, and shielding effectiveness of the resulting GDLs are computed in a reverberation environment up to 10 THz by applying the transfer matrix method to both the GDL and to the ESL. The comparison of the obtained results proves the high accuracy of the homogenization-based ESL model.
A new, transparent, metal-free absorber, based on the use of multilayer graphene/dielectric laminates (GLs), is proposed for applications in the low-terahertz frequency range. The designed absorber has a total thickness of around 70 µm and consists of a front matching dielectric layer followed by a GL, a dielectric spacer and a back GL. The laminates are periodic structures constituted of graphene sheets separated by 50-nm-thick polyethylene terephthalate (PET) interlayers, while the matching layer and the spacer are one-quarter-wavelength thick and made of PET. The GLs are modeled as homogeneous-equivalent single layers (ESLs) characterized by their sheet resistances Rs. An innovative analytical method is proposed in order to select Rs values optimizing the electromagnetic wave absorption either in low-gigahertz or low-terahertz frequency range. The frequency spectra of the absorption, reflection and transmission coefficients are computed in the range up to 4 THz by using different values of Rs. Then, realistic Rs values of chemically doped graphene monolayers over PET substrates are considered. The designed absorbers are characterized by an absorption coefficient with a peak value of about 0.8 at the first resonant frequency of 1.1 THz, and a 1.4 THz bandwidth centered at 1.5 THz with reflection coefficient below - 10 dB. Moreover, the optical transmittance of the proposed absorbers are computed by means of the optical matrix theory and it is found to be greater than 86% in all the visible ranges.
29 December 2020 in IEEE Transactions on Electromagnetic Compatibility
The design of new transparent absorbers for the upcoming fifth-generation (5G) technology is investigated. The absorbers consist of a matching layer, a lossy sheet, a spacer, and a back conducting layer (BCL). Both the matching layer and the spacer are one-quarter-wavelength thick and made of polyethylene terephthalate (PET). The lossy sheet and the BCL consist of indium tin oxide (ITO) thin films or graphene-PET laminates in order to avoid the use of any metal and to guarantee the optical transmittance. An innovative closed-form formulation is developed with the aim of evaluating the optimal values of sheet resistances of the lossy layers through analytical expressions. The absorption performances are investigated considering impinging plane waves with an incidence angle between 0° and 30°. The computed absorption coefficients in transverse magnetic (TM) or transverse electric (TE) modes are greater than 0.8, and the transmission coefficient is lower than 0.1 in the 5G frequency range from 25 up to 47 GHz, assuming that the matching layer and the spacer are 1.3 mm thick. The optical transmittance of the absorbers is evaluated in the wavelength range from 400 up to 700 nm by means of an accurate matrix simulation model, considering both optical polarizations, S (i.e., TE) and P (i.e., TM) for different incidence angles. The computed average optical transmittances of the designed absorbers are greater than 80% at 550 nm, i.e., at the wavelength corresponding to the maximum eye sensitivity.
The impedance matching equation of a single layer dielectric-magnetic absorber excited by an oblique incidence plane wave is resolved with an expression providing the optimal thickness and highlighting the composite crucial parameters. The effective propagation constant of the nonuniform refracted plane wave into the absorber is represented by a new formulation as a function of the true refraction angle which is a real number unlike the complex quantity resulting from the Snell’s law, usually applied in the literature. The proposed design process is applied to compute microwave absorption performances of different dielectric-magnetic materials, considering both normal and oblique incidence. Furthermore, the incidence angle effect is investigated.
4 December 2018 in IEEE Transactions on Electromagnetic Compatibility