Objective. To predict the target of the active ingredient of lotus leaf for lowering fat and losing weight. Explore its multicomponent, multitarget, multipath mechanism. Methods. Screen the main active ingredients of lotus leaves through the TCMSP database, and use the TCMSP database to predict the potential targets of the active ingredients. Obtain obesity-related targets from the human genome annotation (GeneCards) database. Use Venn software to take the intersection of the two to obtain the effect target of the lotus leaf lipid-lowering and weight-reducing effects. Use Cytoscape 3.6.0 software to construct an effective ingredient-target network. Use the STRING database to construct an intersection target protein interaction (PPI) network, visualize it with Cytoscape 3.6.0 software, and perform network topology analysis to obtain the core target. Use the DAVID database to perform gene ontology (GO) and metabolic pathway (KEGG) enrichment analysis for the above targets. Use AutoDockTools software for molecular docking to verify the binding strength. Results. A total of 15 main active ingredients such as quercetin, isorhamnetin, sitosterol, and kaempferol were obtained, which can act on 135 targets related to obesity. These targets are significantly enriched in multiple GO and KEGG entries such as hypoxia response, positive regulation of gene expression, response to toxic substances, aging, and positive regulation of RNA polymerase II promoter transcription. Molecular docking shows that flavonoids such as quercetin have better binding to the target protein Akt1. Conclusion. The lipid-lowering and weight-reducing effects of lotus leaf embody the characteristics of multicomponent, multitarget, and multipathway of traditional Chinese medicine, which provides a certain scientific basis for the screening and in-depth study of the effective ingredients of lotus leaf.
The aim of this study was to investigate whether the neuroprotective effects of astragaloside IV (AS-IV) against hydrogen peroxide (H2O2)-induced damage on human neuroblastoma cell line (SH-SY5Y) are associated with synaptic plasticity. The concentration screening of AS-IV and H2O2 on SH-SY5Y cells and the protective effects of AS-IV on SH-SY5Y cells under H2O2 stress were all determined by MTT assay. The expression of postsynaptic density 95 (PSD-95) and growth-associated protein 43 (GAP-43) were measured by western blot (WB) and inmunofluorescence staining assay under the same treatment conditions. According to the MTT results, the concentration of H2O2 at 50μmol/L for 3h was used for the cell damage model, and various concentrations of AS-IV (0.1, 0.2, 0.3, and 0.4μmol/L) were used to affect SH-SY5Y cells. The MTT results showed that pretreatment of SH-SY5Y cells with AS-IV (0.1, 0.2, 0.3, and 0.4μmol/L) attenuated the damage induced by H2O2 (50μmol/L, 51.62 cell viability) and increased cell viability to 64.19, 63.48, 65.86, and 65.81, respectively. Western blot analysis and immunofluorescence staining showed that the protective effects of AS-IV against SH-SY5Y cell damage caused by H2O2 resulted in reduced expression of PSD-95 and increased expression of GAP-43 in comparison with the H2O2 treatment group. The conclusion shows that AS-IV protected SH-SY5Y cells and enhanced their viability under H2O2 stress. AS-IV may facilitate presynaptic and postsynaptic plasticity to exert protective effects against oxidative damage of SH-SY5Y cells.
1 October 2019 in IOP Conference Series: Earth and Environmental Science
We present here, the design and synthesis of a phenylbutyric acid-magnolol-coumarin conjugates (5). Compound 5 is a multifunctional molecule composed of magnolol, coumarin, phenylbutyric acid as model active drugs via ester. Upon entering tumor cells, ester bond cleavage occurs as well as active drug magnolol, coumarin and phenylbutyric acid release to attack cancer cells. In vitro anti-proliferation experiments showed that the inhibitory activity of compound 5 against HepG2, MCF-7, A431 and A549 cells was significantly higher than that of its single parent compound. Moreover, compound 5 had a long-term effect. Due to fluorescence of compound 5, it can serve as a fluorescence imaging agent and its uptake can be monitored. Compound 5 may provide a reference for the design of new derivatives of magnolol.
29 August 2022 in Advances in Materials Science and Engineering
Iron-based powder metallurgy materials are the largest type of powder metallurgy materials, mainly used in structural parts, bearings, and friction materials. Iron-based powder metallurgy materials have a series of advantages such as low cost, good machinability, good weldability, and heat treatment. In recent years, the enhanced iron-based powder metallurgy materials based on lavender elements have become a hot spot in the development of material transportation carriers. In order to study the effects of different hot pressing and sintering temperatures on the density, microstructure, and hardness of the enhanced iron-based powders of caladium, we conducted related studies on the structure core properties of the enhanced iron-based powders of caladium to explore whether it can be used as a drug transport carrier. The research results show that hot pressing sintering can make the powder achieve high densification at lower temperature and shorter cycle, especially in the preparation of difficult-to-form and sintered powder metallurgy materials with unique advantages.
17 September 2021 in Journal of Analytical Methods in Chemistry
Methods. The influences of methanol proportion, flow rate, column temperature, and injection volume in the mobile phase on the chromatographic resolution of chromatographic peak of euphorbia factor L1 were experimentally studied via Plackett–Burman design, and the key analysis parameters were screened out; the key analysis parameters were optimized through the central composite design, and the chromatographic analysis conditions were established. Euphorbia factor L1 was taken as the internal reference to construct the relative correction factors for L3 and L4 relative to L1, and their contents were calculated, thus realizing the QAMS. Meanwhile, the euphorbia factor L3 and euphorbia factor L4 were determined using the external standard method, and the differences of values measured by the external standard method from the values predicted by the QAMS method were compared, in an effort to verify the accuracy and feasibility of the QAMS method. Results. The methanol proportion and column temperature in the mobile phase were the key analysis parameters , and the chromatographic conditions were determined as follows. The methanol/water ratio, column temperature, detection wavelength, flow rate, and injection volume were 60 : 40, 30°C, 275 nm, 1.0 mL/min, and 10 μL, respectively. A total of 20 batches of samples were determined by the QAMS method and external standard method; the relative standard deviations (RSDs) of L3 and L4 determination results were less than 2.0%, without any significant difference. Conclusion. The QbD-based QAMS method can be used to determine the contents of euphorbia factor L3 and euphorbia factor L4 in Euphorbia lathyris L., and it is accurate and feasible.
Objective. A network pharmacology approach was used to investigate the main active ingredients, key targets, and mechanisms of action of bitter almond antioxidants, and preliminary validation of the relevant targets was performed using molecular docking techniques. Methods. The active ingredients of bitter almond were obtained through the traditional Chinese medicine systematic pharmacology database and analysis platform (TCMSP), and the main active ingredients were screened by bioavailability (OB) and drug-like properties (DL); the GeneCards database was used to search antioxidant-related disease targets through the traditional Chinese medicine systematic pharmacology database and analysis; building a drug-disease-target visual network map with Cytoscape 3.9.0 software; a protein interaction (PPI) network was constructed using STRING website and core targets were screened; GO function and KEGG pathway enrichment analysis were obtained using Metoscape. Finally, SailVina software was used to molecularly dock the major active ingredients and target proteins and visualize them using PyMOL software. Results. A total of 19 antioxidant active ingredients were obtained for bitter almond, mainly stigmasterol, glycyrol, and estrone. The targets regulated by their main active ingredients were intersected with oxidative targets, and 53 intersected targets were obtained by Venn diagram, with key targets involving NR3C2, NCOA2, MAOA, ADRA2A, and CHRM1; GO analysis yielded 3616 GO entries, including 2821 biological process (BP) entries, 316 cellular component (CC) entries, and 479 molecular function (MF) entries, and 184 signalling pathways were obtained from KEGG pathway enrichment screening. The molecular docking results showed that Stigmasterol-NR3C2 binding was better. Conclusion. Stigmasterol, glycyrol, estrone, and licochalcone B in bitter almond may be the material basis of antioxidant and have better antioxidant activity; therefore, bitter almond has the characteristics of multicomponent, multitarget and multipathway.