In order to investigate the fermentation process of Artemisia polysaccharides, this paper showcases an investigation into the effects of fermentation time, fermentation temperature, strain inoculum, Artemisia annua addition, and shaker speed on the polysaccharides production of Artemisia annua. The yield of Artemisia polysaccharides content was determined based on the optimization of single-factor test, and then a response surface test was conducted with temperature, inoculum, and time as response variables and the yield of Artemisia polysaccharides as response values. The fermentation process was then optimized and the antioxidant activity of Artemisia polysaccharides was monitored using DPPH, ABTS+, OH, and total reducing power. The optimum fermentation process was determined by the test to be 5% inoculum of Aspergillus niger, temperature 36°C, time 2 d, shaker speed 180 r/min, and 4% addition of Artemisia annua, and the extraction of Artemisia polysaccharides was up to 17.04% by this condition of fermentation. The polysaccharides from Artemisia annua fermented by Aspergillus Niger had scavenging effects on DPPH, ABTS, and OH free radicals.
Objective: To predict the target of Seabuckthorn polysaccharides in the prevention and treatment of cervical cancer, and to explore its multi-target and multi-pathway mechanism.Methods: Using the Swisstarget database, a total of 61 potential targets of polysaccharide active components were obtained. Cervical cancer related targets were obtained from the GeneCards database. The correlation score was greater than 5 targets for 2727; 15 intersection targets of active ingredients and disease were obtained by Venn diagram. Cytoscape3.6.0 software was used to construct the Polysaccharide composition-Target-Disease Network and Protein-Protein Interaction Networks (PPI). Cytoscape3.6.0 software was used for visualization and network topology analysis to obtain core targets. Kyoto encyclopedia of Genes and Genomes (KEGG) and Gene Ontology (GO) were analyzed using Metascape database. SailVina and PyMOL software were used for molecular docking to verify binding strength.Results: A total of 15 core targets were obtained for cervical cancer. These targets are significantly enriched in HIF-1 signaling pathway, Galactose metabolism, EGFR tyrosine kinase inhibitor resistance, growth factor receptor binding, carbohydrate binding, protein homodimerization activity and other GO and KEGG entries; Molecular docking showed that ADA and GLB1 were well bound to Glucose, D-Mannose, and Galactose.Conclusion: The effect of seabuckthorn polysaccharides on the prevention and treatment of cervical cancer is characterized by multi-component, multi-target and multi-pathway, which provides scientific basis for further research on the activity of seabuckthorn polysaccharides.
27 October 2021 in Evidence-Based Complementary and Alternative Medicine
Objective. To predict the target of the active ingredient of lotus leaf for lowering fat and losing weight. Explore its multicomponent, multitarget, multipath mechanism. Methods. Screen the main active ingredients of lotus leaves through the TCMSP database, and use the TCMSP database to predict the potential targets of the active ingredients. Obtain obesity-related targets from the human genome annotation (GeneCards) database. Use Venn software to take the intersection of the two to obtain the effect target of the lotus leaf lipid-lowering and weight-reducing effects. Use Cytoscape 3.6.0 software to construct an effective ingredient-target network. Use the STRING database to construct an intersection target protein interaction (PPI) network, visualize it with Cytoscape 3.6.0 software, and perform network topology analysis to obtain the core target. Use the DAVID database to perform gene ontology (GO) and metabolic pathway (KEGG) enrichment analysis for the above targets. Use AutoDockTools software for molecular docking to verify the binding strength. Results. A total of 15 main active ingredients such as quercetin, isorhamnetin, sitosterol, and kaempferol were obtained, which can act on 135 targets related to obesity. These targets are significantly enriched in multiple GO and KEGG entries such as hypoxia response, positive regulation of gene expression, response to toxic substances, aging, and positive regulation of RNA polymerase II promoter transcription. Molecular docking shows that flavonoids such as quercetin have better binding to the target protein Akt1. Conclusion. The lipid-lowering and weight-reducing effects of lotus leaf embody the characteristics of multicomponent, multitarget, and multipathway of traditional Chinese medicine, which provides a certain scientific basis for the screening and in-depth study of the effective ingredients of lotus leaf.
29 August 2022 in Advances in Materials Science and Engineering
Iron-based powder metallurgy materials are the largest type of powder metallurgy materials, mainly used in structural parts, bearings, and friction materials. Iron-based powder metallurgy materials have a series of advantages such as low cost, good machinability, good weldability, and heat treatment. In recent years, the enhanced iron-based powder metallurgy materials based on lavender elements have become a hot spot in the development of material transportation carriers. In order to study the effects of different hot pressing and sintering temperatures on the density, microstructure, and hardness of the enhanced iron-based powders of caladium, we conducted related studies on the structure core properties of the enhanced iron-based powders of caladium to explore whether it can be used as a drug transport carrier. The research results show that hot pressing sintering can make the powder achieve high densification at lower temperature and shorter cycle, especially in the preparation of difficult-to-form and sintered powder metallurgy materials with unique advantages.
17 September 2021 in Journal of Analytical Methods in Chemistry
Methods. The influences of methanol proportion, flow rate, column temperature, and injection volume in the mobile phase on the chromatographic resolution of chromatographic peak of euphorbia factor L1 were experimentally studied via Plackett–Burman design, and the key analysis parameters were screened out; the key analysis parameters were optimized through the central composite design, and the chromatographic analysis conditions were established. Euphorbia factor L1 was taken as the internal reference to construct the relative correction factors for L3 and L4 relative to L1, and their contents were calculated, thus realizing the QAMS. Meanwhile, the euphorbia factor L3 and euphorbia factor L4 were determined using the external standard method, and the differences of values measured by the external standard method from the values predicted by the QAMS method were compared, in an effort to verify the accuracy and feasibility of the QAMS method. Results. The methanol proportion and column temperature in the mobile phase were the key analysis parameters , and the chromatographic conditions were determined as follows. The methanol/water ratio, column temperature, detection wavelength, flow rate, and injection volume were 60 : 40, 30°C, 275 nm, 1.0 mL/min, and 10 μL, respectively. A total of 20 batches of samples were determined by the QAMS method and external standard method; the relative standard deviations (RSDs) of L3 and L4 determination results were less than 2.0%, without any significant difference. Conclusion. The QbD-based QAMS method can be used to determine the contents of euphorbia factor L3 and euphorbia factor L4 in Euphorbia lathyris L., and it is accurate and feasible.
Objective. A network pharmacology approach was used to investigate the main active ingredients, key targets, and mechanisms of action of bitter almond antioxidants, and preliminary validation of the relevant targets was performed using molecular docking techniques. Methods. The active ingredients of bitter almond were obtained through the traditional Chinese medicine systematic pharmacology database and analysis platform (TCMSP), and the main active ingredients were screened by bioavailability (OB) and drug-like properties (DL); the GeneCards database was used to search antioxidant-related disease targets through the traditional Chinese medicine systematic pharmacology database and analysis; building a drug-disease-target visual network map with Cytoscape 3.9.0 software; a protein interaction (PPI) network was constructed using STRING website and core targets were screened; GO function and KEGG pathway enrichment analysis were obtained using Metoscape. Finally, SailVina software was used to molecularly dock the major active ingredients and target proteins and visualize them using PyMOL software. Results. A total of 19 antioxidant active ingredients were obtained for bitter almond, mainly stigmasterol, glycyrol, and estrone. The targets regulated by their main active ingredients were intersected with oxidative targets, and 53 intersected targets were obtained by Venn diagram, with key targets involving NR3C2, NCOA2, MAOA, ADRA2A, and CHRM1; GO analysis yielded 3616 GO entries, including 2821 biological process (BP) entries, 316 cellular component (CC) entries, and 479 molecular function (MF) entries, and 184 signalling pathways were obtained from KEGG pathway enrichment screening. The molecular docking results showed that Stigmasterol-NR3C2 binding was better. Conclusion. Stigmasterol, glycyrol, estrone, and licochalcone B in bitter almond may be the material basis of antioxidant and have better antioxidant activity; therefore, bitter almond has the characteristics of multicomponent, multitarget and multipathway.