Projects in seasonal frozen soil areas are often faced with frost heaving and thawing subsidence failure, and the foundation fill of most projects is a mixture of soil and rock. Therefore, taking soil–rock mixture with different rock contents as research objects, the residual deformation of soil–rock mixture under multiple freezing–thawing cycles is studied. In addition, the deep learning method based on the artificial neural network was pioneered combined with the freezing–thawing test of the soil–rock mixture, and the Long short-term memory (LSTM) model was established to predict the results of the freezing–thawing test. The LSTM model has been verified to be feasible in the exploration of the freeze–thaw cycle law of a soil–rock mixture, which can not only greatly reduce the period of the freeze–thaw test, but also maintain a high prediction accuracy to a certain extent. The study found that the soil–rock mixture will repeatedly produce frost heave and thaw subsidence under the action of freeze–thaw cycles, and the initial frost heave and thaw subsidence changes hugely. With the increase of the number of freeze–thaw cycles, the residual deformation decreases and then becomes steady. Under the condition that the content of block rock in the soil–rock mixture is not more than 80%, with the increase of block rock content, the residual deformation caused by the freeze–thaw cycle will gradually decrease due to the skeleton function of block rock, while the block rock content’s further increase will increase the residual deformation. Furthermore, the LSTM model based on an artificial neural network can effectively predict the freezing and thawing changes of soil–rock mixture in the short term, which can greatly shorten the time required for the freezing and thawing test and improve the efficiency of the freezing and thawing test to a certain extent.
Using high-precision CT scanning equipment, two series of tests on frost and salt weathering were conducted to investigate the characteristics of pore change in tuff. Experiments on frost and salt aging were performed with pieces of tuff from the same area of southeast China. One set of tuff samples was soaked in saturated sodium sulfate or magnesium sulfate solutions for 60 days. Another set of tuff samples were subjected to 60 freeze–thaw cycles after being submerged in saturated sodium sulfate or magnesium sulfate solutions for 48 h. Our study demonstrates that processes such as salt erosion and freeze–thaw affect the pore evolution of tuffs significantly. Tuff lost 1.56% of its mass after being submerged in magnesium sulfate solutions for 60 days, while tuff submerged in sodium sulfate solutions gained a negative 0.33% of its mass. After 60 freeze–thaw cycles, the mass loss of tuff samples immersed in sodium sulfate, magnesium sulfate, and distilled water solutions was 3.52%, 3.58%, and 3.82%, respectively. The average porosity of the magnesium sulfate and sodium sulfate test groups increased by 6.59% and 4.14%, respectively, when the number of days of salt erosion was extended from 10 to 60 days. The average porosity of tuff samples immersed in magnesium persulfate and sodium sulfate solutions increased by 2.25% and 2.18%, respectively, as the number of freeze–thaw cycles went from 10 to 60.