The importance of in-situ rock block characterization has been realized for decades in rock mechanics and engineering, yet how to reliably measure and characterize the geometrical properties of blocks in varied forms of exposures and patterns of jointing is still a challenging task. Using a point cloud model (PCM) of rock exposures generated from remote sensing techniques, we developed a consistent and comprehensive method for rock block characterization that is composed of two different procedures and a block indicator system. A semi-automatic procedure towards the robust extraction of in-situ rock blocks created by the deterministic discontinuity network on rock exposures (PCM-DDN) was developed. A 3D stochastic discrete fracture network (DFN) simulation (PCM-SDS) procedure was built based on the statistically valid representation of the discontinuity network geometry. A multi-dimensional block indicator system, i.e., the block size, shape, orientation, and spatial distribution pattern for systematic and objective block characterization, was then established. The developed method was applied to a synthetic model of cardboard boxes and three different rock engineering scenarios, including a road cut slope from Spain and two open-pit mining slopes from China. Compared with existing empirical methods, the proposed procedures and the block indicator system are dependable and practically feasible, which can help enhance our understanding of block geometry characteristics in related applications.

The stability of natural rock slopes is influenced by a wide spectrum of factors, such as mechanical properties of bedrocks and spatial distribution of discontinuities. Their specific values are typically incomplete, due mainly to the lack of effective and comprehensive methods to accurately characterize these factors, especially those inside of the slopes. The neutrosophic number is a useful tool to solve problems in indeterminate environment. This study introduces the neutrosophic theory into slope stability assessment. A vector similarity measure developed under neutrosophic environment was employed to establish a stability assessment method considering multilevel attributes of slopes. Using this method, the level of stability for studied slopes, i.e., stable, mostly stable, less stable, and instable, was determined by computing the relation indices. The method was applied to a group of rock slopes located in Zhejiang province, China, and the calculated results were compared with the reality of in situ survey. The field application showed that the developed method has a good efficiency and precision in assessing the stability of rock slopes. The obtained weight vector can reveal the key influential parameters that inherently control the stability of rock slopes.

In order to mitigate ground deformation during shield construction in both upper soft and lower hard strata of coastal areas, a numerical simulation was executed. This simulation assessed surface deformation under varying stratum ratios, grouting pressures, and earth bin pressures. The evaluation was primarily based on the amount of ground deformation, which revealed that hard rock strata offer superior settlement control compared to soft rock strata. The excavation of the right tunnel line increased disturbance to the left line at higher stratum ratios. Surface deformation demonstrated a linear correlation with earth pressure, with 130 kPa identified as the optimal point. Higher pressures resulted in extrusion deformation and ground uplift. Grouting pressure had a minimal impact on stratum deformation over time. The stratum ratio exerted the most significant influence on settlement, followed by earth pressure, with grouting pressure having the least impact. In the context of coastal tunnel construction, hard rock excavation is favored. Earth pressure must be balanced to prevent subsidence or uplift, while excessive grouting pressure does not significantly reduce subsidence. Grouting pressure should ensure the complete filling of voids.

Rock quality designation (RQD) is widely adopted as a fundamental tool in characterizing rock masses since it was devised in 1964. Since the conventional RQD calculation is limited due to its dependence on the selected threshold, previous research introduced generalized RQD to adequately reflect the anisotropy and scale effect of RQD. However, the influence of the joint development inside rock mass on generalized RQD remains unclear. The objective of this work is to investigate characteristics of the generalized RQD in view of different development degrees of discontinuities in rock mass, including spacing (density) and trace length. Three‐dimensional fracture network modelling is employed to simulate the actual rock mass of open‐pit iron mine in China. Virtual scanlines are set to obtain RQD values in different directions. The results primarily show that the generalized RQD should be introduced to calculate the RQD with different thresholds to fully reflect the anisotropy of rock mass. The optimal threshold can be obtained based on an anisotropic coefficient, which is defined by (RQD_max‐RQD_min). It is also indicated that the fracture spacing has a great influence on both the anisotropy of RQD and the selection of the optimal threshold. The optimal threshold of the generalized RQD increases with the increase in the fracture spacing. In addition, the scale effect of RQD in different models is discussed by changing the length of the scanlines. The longer the scanlines we set, the more stable RQD value can be obtained in the model. It is recommended to fit much longer scanline to get realistic RQD in heavily fractured rock mass.