(1) This work answers the question of whether and to what extent there is a significant difference in mechanical properties when different additive manufacturing processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF) and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally in the way a part is manufactured. (2) Known process parameters for low-porosity parts were used to fabricate tensile strength specimens. Half of the specimens were heat-treated, and all specimens were tested for mechanical properties in a quasi-static tensile test. In addition, the material hardness was determined. (3) It was found that, firstly, heat treatment resulted in a sharp increase in mechanical properties such as hardness, elastic modulus, yield strength and ultimate strength. In addition to the increase in these properties, the elongation at break also decreases significantly after heat treatment. The choice of process, on the other hand, does not give either process a clear advantage in terms of mechanical properties but shows that it is necessary to consider the essential mechanical properties for a desired application.
Additive manufacturing of metallic components often results in the formation of columnar grain structures aligned along the build direction. These elongated grains can introduce anisotropy, negatively impacting the mechanical properties of the components. This study aimed to achieve controlled solidification with a fine-grained microstructure to enhance the mechanical performance of printed parts. Stainless steel 316L was used as the test material. High-intensity ultrasound was applied during the direct energy deposition (DED) process to inhibit the formation of columnar grains. The investigation emphasized the importance of amplitude changes of the ultrasound wave as the system’s geometry continuously evolves with the addition of multiple layers and assessed how these changes influence the grain size and distribution. Initial tests revealed significant amplitude fluctuations during layer deposition, highlighting the impact of layer deposition on process uniformity. The mechanical results demonstrated that the application of ultrasound effectively refined the grain structure, leading to a 15% increase in tensile strength compared to conventionally additively manufactured samples.
This paper investigates the effects of various process parameters, specifically the substrate temperature, on weld track geometry in Directed Energy Deposition (DED) processes. A specialized experimental setup integrated within a DED machine facilitates controlled thermal conditioning of sample sheets. Through Design of Experiments (DoE) methods, individual weld marks are generated and analysed to assess geometric characteristics. Regression models are constructed to predict machine parameters for desired weld geometry at different substrate temperatures. Validation experiments confirm the accuracy and reliability of the regression models. Results show a consistent trend towards target geometric features across a broad range of substrate temperatures. Despite deviations in measured values, successful fabrication is achieved, demonstrating robust bonding between weld and substrate. Contact angle predictions exhibit precision within a partial temperature range for proper deposition. The developed model offers insights for optimizing DED process parameters to achieve desired weld characteristics, advancing the capabilities and reliability of additive manufacturing technology. Future work aims to refine the regression model and explore additional mathematical relationships for enhanced accuracy. An implication of this work is the potential to vary the local mechanical properties of parts by controlling the temperature profile while maintaining consistent geometric characteristics. By manipulating the substrate temperature, it may be possible to tailor the microstructure and mechanical properties of fabricated components in the future to meet specific requirements in different regions of the part.