Ti-4Al-5Mo-5V-5Cr-1Nb (wt.%) is a new type of high-strength (~1300 MPa) titanium (Ti) alloy developed for aerospace applications. Until now, the research on its welding and subsequent heat treatment is barren. Herein, we employed electron beam welding (EBW) to a solutionized Ti-4Al-5Mo-5V-5Cr-1Nb with a phase constituent of α + β and investigated its microstructure and mechanical properties in both as-welded (AW) and post-weld aging treated (PWAT) conditions. Results showed that due to the thermal input of the welding process, the α phase in the original microstructure of base material (BM) transformed into the β phase in the fusion zone (FZ). Similar microstructural evolution was observed for the heat-affected zone (HAZ) near the FZ (Near-HAZ), whereas the HAZ far away from FZ (Far-HAZ) contained a small amount of round α phase (ghost α) due to its slower cooling rate. Such a microstructural change resulted in poor tensile strength (~780 Mpa) for the as-welded joint. After PWAT, a large number of acicular α precipitated in the FZ and HAZ and its size (S) in different zones followed the order of SFar-HAZ < SFZ ≈ SNear-HAZ < SBM. The presence of αs precipitates remedied the tensile strength of the weld joint almost to the same as that of the BM. The present findings established the foundation of the application of this high-strength Ti alloy.
Metal additive manufacturing (AM) achieves a near-net-shaped forming capability and thus offers distinct advantages over conventional machining in fabricating components with complex internal channel geometries. Nevertheless, the as-fabricated channels typically exhibit suboptimal surface quality characterized by elevated roughness, partially sintered powder adhesion, and spherical melt droplets, all of which detrimentally affect component performance and operational reliability. The precision finishing of these intricate internal surfaces remains a significant technological bottleneck that hinders the broader industrial implementation of metal AM. This review comprehensively examines four principal surface enhancement techniques for internal channels: abrasive flow polishing (AFP), chemical polishing (CP), electrochemical polishing (ECP), and electrolyte plasma polishing (EPP). Through a systematic comparison of their process mechanisms, operational constraints, and recent technological advancements, we elucidate their respective merits and limitations and identify promising development directions. The analysis in this review is beneficial for providing crucial insights for surface quality optimization, addressing current AM challenges, and facilitating the industrial maturation of technology.