Bacterial nanocellulose (BNC) is a novel nanomaterial known for its large surface area, biocompatibility, and non-toxicity. BNC contributes to regenerative processes in the skin but lacks antimicrobial and anti-inflammatory properties. Herein, the development of bioactive wound dressings by loading antibacterial povidone-iodine (PVI) or anti-inflammatory acetylsalicylic acid (ASA) into bacterial cellulose is presented. BNC is produced using Hestrin–Schramm culture media and loaded via immersion in PVI and ASA. Through scanning electron microscopy, BNC reveals open porosity where the bioactive compounds are loaded; the mechanical tests show that the dressing prevents mechanical wear. The loading kinetic and release assays (using the Franz cell method) under simulated fluids present a maximum loading of 589.36 mg PVI/g BNC and 38.61 mg ASA/g BNC, and both systems present a slow release profile at 24 h. Through histology, the complete diffusion of the bioactive compounds is observed across the layers of porcine skin. Finally, in the antimicrobial experiment, BNC/PVI produced an inhibition halo for Gram-positive and Gram-negative bacteria, confirming the antibacterial activity. Meanwhile, the protein denaturation test shows effective anti-inflammatory activity in BNC/ASA dressings. Accordingly, BNC is a suitable platform for the development of bioactive wound dressings, particularly those with antibacterial and anti-inflammatory properties.

This study explores the use of cellulose nanofiber (CNF)-stabilized Pickering emulsions for paper coatings, focusing on their rheological properties and effects on hydrophilicity and water vapor transmission rate (WVTR). Two types of Pickering emulsions, oil-in-water (O/W), were stabilized with 1 wt% CNF extracted from fique by-products. The oily phases of the emulsions were composed of poly(lactic acid) (PLA) and cocoa butter (CB). The physical stability, viscosity, and viscoelasticity of the emulsions were characterized. The emulsions were applied to the surfaces of Bond and Kraft papers using the rod-coating method. The coating process involved first applying a layer of the PLA emulsion followed by a layer of the CB emulsion. The coated papers were then evaluated by FE-SEM, contact angle, adhesion work, and water vapor transmission rate (WVTR). The results indicated that the coatings effectively produced a slightly hydrophobic surface on the papers, with contact angles approaching 90°. Initially, Kraft paper exhibited a WVTR value of 29.20 ± 1.13 g/m²·h, which significantly decreased to 7.06 ± 2.80 g/m²·h after coating, representing a reduction of 75.82%. Similarly, natural Bond paper showed a WVTR value of 30.56 ± 0.34 g/m²·h, which decreased to 14.37 ± 5.91 g/m²·h after coating, indicating a reduction of 47.02%. These findings demonstrate the potential of CNF-stabilized Pickering emulsions for enhancing the performance of paper coatings in terms of hydrophobicity and moisture barrier properties. The approach of this study aligns with global sustainability goals in packaging materials combining the use of PLA and CB to develop a waterborne coating to enhance the moisture barrier properties, demonstrated by a substantial reduction in water vapor transmission rates, and an improved hydrophobicity of coated papers.

According to the regulations of the United States Food and Drug Administration (FDA), organic solvents should be limited in pharmaceutical and food products due to their inherent toxicity. For this reason, this short paper proposes different mechanical treatments to extract lycopene without organic solvents to produce an edible sunflower oil (SFO) enriched with lycopene from fresh pink guavas (Psidium guajava L.) (FPGs). The methodology involves the use of SFO and a combination of mechanical treatments: a waring blender (WB), WB+ high-shear mixing (HSM) and WB+ ultrafine friction grinding (UFFG). The solid:solvent (FPG:SFO) ratios used in all the techniques were 1:5, 1:10 and 1:20. The results from optical microscopy and UV–vis spectroscopy showed a correlation between the concentration of lycopene in SFO, vegetable tissue diameters and FPG:SFO ratio. The highest lycopene concentration, 18.215 ± 1.834 mg/g FPG, was achieved in WB + UFFG with an FPG:SFO ratio of 1:20. The yield of this treatment was 66% in comparison to the conventional extraction method. The maximal lycopene concentration achieved in this work was significantly higher than the values reported by other authors, using high-pressure homogenization for tomato peel and several solvents such as water, SFO, ethyl lactate and acetone.

Turmeric (Curcuma longa L.) plants are native to Southeast Asia and are part of the Zingiberaceae family. Global consumption and production of this plant are expanding. In countries such as Colombia, turmeric is a promising cultivar. Curcuminoids derived from its rhizomes are used in food, pharmaceuticals, and natural cosmetics. Curcuminoids constitute approximately 3 wt% of the rhizome. Many residues rich in cellulose and starch can thus be recovered. This study characterizes a novel starch isolated from Colombian turmeric cultivars. The morphological parameters of the starch were determined using microscopic techniques such as scanning electron microscopy (SEM). Proximate analysis and infrared spectroscopy (ATR-FTIR) were used to analyze the chemical composition, while physical analyses included thermal characterization, swelling power testing, solubility, water retention capacity, and colorimetry evaluation. The new starch granules were ellipsoidal in shape and ranged in diameter from 19.91 to 38.09. A trace amount of remaining curcumin was identified through chemical and physical characterization. The swelling power was 3.52 ± 0.30, and its water retention capacity was 3.44 ± 0.30. Based on these findings, turmeric can be useful in both food and non-food applications. Because starch was extracted from other Zingiberaceae plants, this study also includes a brief review of the related literature.

The objective of this research was to assess the potential of a Pickering emulsion based on lycopene extracted from guava by sunflower oil-water and cellulose nanofibers (CNFs) isolated from banana residues as a novel ingredient for a French-style salad dressing. The aim was to determine the impact of this emulsion on the stability and rheological properties of the dressing as well as ascertain the presence of lycopene in the final product. The particle size distribution, rheological properties, and emulsion stability of the Pickering emulsion and salad dressing were evaluated. The sample exhibiting the optimal stability condition contained 0.5 wt.% of CNFs (EPI0.5). In order to prepare the French salad dressing based on this Pickering emulsion, three concentrations of vinegar were analyzed. All samples contained white salt and sugar. The findings suggest that alterations in emulsion stability may be influenced by the vinegar content and the presence of salt, particularly during the storage period, which also affects the concentration of lycopene. Notwithstanding these findings, the untrained panelists expressed a favorable opinion and acceptance of the dressings, indicating that the product could serve as an alternative means of enriching food through the incorporation of beneficial substances such as lycopene.