The significant challenges in the use of cellulose as a replacement for plastic are its mechanical properties’ degradation and uncontrolled deformation during the rewetting process. Herein, inspired by the reinforcement of cellulose by lignin in natural plant tissue, a strong and water-stable lignin–cellulose composite (LCC) was developed. A nanocellulose hybrid lignin complex (CHLC) created from bagasse residue after enzymatic hydrolysis was added into a pulp of bleached fibre extracted from pine to produce a lignin–cellulose sheet. The lignin as a water-stable reinforcing matrix, via the hydrogen bonding of the nanocellulose in the CHLC with the fibre was efficiently introduced onto the fibres and the fibre network voids. Compared with a typical lignin-free cellulose sheet, the dry strength and wet strength of the LCC were 218% and 2233% higher, respectively. The developed LCC is an eco-friendly and biodegradable alternative to plastic.
Covalent organic frameworks with three-dimensional networks and interconnected porous structures show promising advantages for hydrogen peroxide photocatalysis. However, 3D COFs are typically constructed from 3D-oriented knots with less conjugation and insufficient light absorption, which significantly inhibits their performance. Herein, we present a universal defect engineering approach by systematically replacing Td knots with trigonal planar ligands and modifying linear linkers with electron-withdrawing/donating groups to achieve simultaneous enhancement of light absorption and precise electronic tuning of 3D donor-acceptor structures. Experimental results and theoretical analysis reveal that the optimized 3D COF with planar ligands induced defects and fluorine functional groups (COF-300-D-F), which achieve an H 2 O 2 production rate of 19.09 mmol g −1 h −1 and apparent quantum yield of 11.95% at 400 nm with benzyl alcohol as sacrificial agent. Moreover, the material maintains long-term stability during continuous operation exceeding 96 hours and exhibits high activity in photocatalytic benzylamine coupling reactions.
To overcome the biological barriers formed by the lignin–carbohydrate complex for releasing fermentable sugars from cellulose by enzymolysis is both imperative and challenging. In this study, a strategy of intergranular swelling of cellulose combined with hydrolysis and oxidation was demonstrated. Pretreatment of the bagasse was evaluated by one bath treatment with phosphoric acid and hydrogen peroxide. The chemical composition, specific surface area (SSA), and pore size of bagasse before and after pretreatment were investigated, while the experiments on the adsorption equilibrium of cellulose to cellulase and reagent reuse were also performed. Scanning electron microscopy (SEM) and high-performance liquid chromatography (HPLC) were employed for microscopic morphology observations and glucose analysis, respectively. The results showed that pretreated bagasse was deconstructed into cellulose with a nanofibril network, most of the hemicellulose (~100%) and lignin (~98%) were removed, and the SSA and void were enlarged 11- and 5-fold, respectively. This simple, mild preprocessing method enhanced cellulose accessibility and reduced the biological barrier of the noncellulose component to improve the subsequent enzymolysis with a high glucose recovery (98.60%).