Xinye WU

Prof. Dr. Xinye WU

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2024 in Atmospheric Pollution Research
Verified
Journal Article
Closed access
SWShui-Ping Wu
Shui-Ping Wu
ZWZhenan Wen
Zhenan Wen
XWXinye WU
Xinye WU
BJBingqi Jiang
Bingqi Jiang
YLYijing Liu
Yijing Liu

26 July 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
AXAiling Xiao
Ailing Xiao
LTLiguo Tang
Liguo Tang
SSShanshan Sun
Shanshan Sun
SWSongji Wu
Songji Wu
XWXinye WU
Xinye WU
WLWenyu Luo
Wenyu Luo
The accurate characterization of the temperature dependencies (TD) of the full tensorial properties of piezoelectric materials (PMs) makes it possible to predict the performance of electromechanical devices fabricated using PMs at different temperatures. The electric resonance (ER) and the resonant ultrasound spectroscopy (RUS) methods—used to characterize the TD of the elastic and piezoelectric constants (EPCs) of PMs—are systematically compared by characterizing Fuji C-213 lead zirconate titanate ceramics. Five samples must be used in ER; however, RUS needs one sample only. Therefore, the preparation of ER samples requires time that is approximately five times higher than that of the RUS sample. Moreover, the temperature-dependent ER measurement requires times that are more than three times than that required by the RUS measurement. RUS can only characterize samples with a high-mechanical quality factor which should be greater than several hundred. RUS takes more time than ER on data processing. Most material constants characterized using RUS are consistent with those characterized using ER. Overall, RUS can obtain more accurate EPCs than ER, which is proved by comparing the measured electric impedance spectra with those calculated using the ER and RUS results. ER has been extensively used to characterize PMs, however, RUS has not, due to the lack of the commercial RUS software for PMs. It is very difficult to develop. This study provides a reference for the selection of various methods for characterizing the TD of the EPCs of PMs. Moreover, it may facilitate the development of RUS for characterizing PMs.

1 May 2024 in Symmetry
Verified
Journal Article
Open access
PDF file
XWXinye WU
Xinye WU
ZWZhiwei Wang
Zhiwei Wang
SCShenghui Chen
Shenghui Chen
Although the probability of a rollover accident is lower than that of other forms of collision, rollover is a serious accident that can break the symmetry of the vehicle and cause serious loss of life and property. There are many factors affecting rollovers, such as the environment, the vehicle, and the driving control. A coach comprises a complex dynamic system; as such, the accuracy and rationality of the used mathematical model are decisive in the study of coach rollover warning and control. By analogy with the modeling method of an automobile collision accident, the general process of a coach rollover accident is analyzed in this study in combination with the contact form and freedom of motion characteristic of the coach body and external environment. According to the principle of conservation of energy, the mathematical models of critical rollover impact force in a collision between vehicles and obstacles and in a collision between two vehicles are established, allowing for analysis of the relationships between the critical tripped rollover impact forces required for a 90° rollover and the continuous action time and collision point height. During the collision between the vehicle and the obstacle, the occurrence of a vehicle rollover is related not only to the impact force in the collision process but also to the collision duration time. Even if the impact force is relatively small, the collision lasts long enough that a second collision may occur until the vehicle rolls over. In the process of a two-vehicle collision, the critical rollover impact force is not only related to the vehicle mass but also to the vehicle wheelbase and the height of the collision point. Based on the law of conservation of momentum, the mathematic models of 90-degree rollover and 180-degree rollover are established, and the critical rollover velocities are calculated. The purpose of this study is to provide reference and guidance for the research methods of vehicle rollover stability and anti-rollover control in the intelligent vehicle era.

30 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XWXinye WU
Xinye WU
SFShude FU
Shude FU
LGLiangrong Guo
Liangrong Guo
In order to reduce the influence of unreasonable road alignment design on vehicle driving safety, a study on road alignment optimization and vehicle driving safety based on two-dimensional point collision dynamics was carried out. First, through the two-dimensional point collision dynamics model, the relationship of the kinematic parameters before and after vehicle collision was deduced. Second, according to the vehicle–road coupling dynamic model analysis after collision, the safety threshold between the radius of the circular curve and the road superelevation was derived by taking vehicle rollover as the critical condition. Next, the road alignment optimization scheme based on vehicle rollover stability after collision was proposed. Finally, the rationality of the optimization scheme was verified by PC-Crash simulation. The simulation results showed that the proposed optimization scheme of the minimum radius and superelevation of the circular curve meets the safety requirements of vehicle rollover. This study optimized the relevant indicators of the road alignment under the premise of ensuring vehicle rollover stability and provides a reference for the improvement and optimization of road alignment design. It also has important guiding significance for the formulation of vehicle driving safety management measures.

13 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XWXinye WU
Xinye WU
SFShude FU
Shude FU
As an important part of the vehicle active collision avoidance system, improvement of the minimum safe following distance model has aroused the interest of researchers at home and abroad. According to the characteristics of the safe driving of vehicles on expressways, the braking process of vehicles is analyzed using the principle of kinematics. According to the requirements of the safe following distance between vehicles, the safe following distance of different braking system structures, different following states, different speeds and different slope sections on expressways is quantitatively analyzed. Three different safe following distance calculation methods based on braking deceleration under different slope conditions are established. Matlab software was used for simulation analysis. The simulation results show that the calculation method of the safe following distance meets the requirements of keeping safe distance in the Implementation Regulations of Road Traffic Safety Law of the People’s Republic of China and provides a more specific reference basis for speed limit used on expressways. This study provides a theoretical basis for the application and interpretation of the parking sight distance value stipulated in the Design Specification for Highway Alignment, and has certain practical guiding significance for improving the density and transportation efficiency of expressway vehicles and reducing the incidence of rear-end traffic accidents.

11 June 2024 in Buildings
Verified
Journal Article
Open access
PDF file
XWXinye WU
Xinye WU
SCShenghui Chen
Shenghui Chen
YHYixin Hu
Yixin Hu
ZWZhiwei Wang
Zhiwei Wang
ZLZhengke Li
Zhengke Li
With the development of steel-structure construction technology in high-rise buildings, the design and construction of high-rise steel structures tend to be complicated. Based on the Zhuhai Tiejian Square project, the fluid-structure coupling calculation analysis and on-site monitoring are carried out in view of the wind load of the high-altitude steel-structure connecting bridge in the hoisting stage of the Zhuhai Tiejian Square project. The main structure of the project is four towers and five high-altitude, small-spacing steel structures connecting the four towers. The lifting process of the third zone is taken as the analysis object, and the hoisting idea of “low-altitude hoisting, overall lifting” is adopted. Because the span of the high-altitude steel-structure connecting bridge is small and the installation height is high, the influence of wind load on the hoisting process cannot be ignored. Therefore, the unidirectional fluid-structure coupling model of the high-altitude small-space steel-structure connecting bridge in the third zone was established by using CFD calculation software ANSYS Fluent 2022 R1, and the corresponding flow field and solid calculation results were obtained and analyzed. The analysis results show that the lifting structure still produces a certain deformation when the wind speed is 5 m/s or 10 m/s, and the calculation results show that the stress calculation results are still within the safe range of steel strength for the sensitivity of the lifting structure under wind load. With the increase of wind speed, the local maximum stress of the structure increases greatly, but the overall deformation remains stable, which indicates that the greatest challenge of hoisting steel structures under wind load may be the stability direction rather than the strength, so it is necessary to strictly monitor the displacement deformation of the structure during construction. Then, through the monitoring of the overall lifting process of the high-altitude, large-span, steel-connected structure of Zhuhai Tiejian Square from pre-lifting to formal lifting, real-time monitoring and data analysis show that the lifting process of the high-altitude steel bridge of Zhuhai Tiejian Square is safe and reliable, the force transformation of each component is reasonable, the lifting process is relatively stable, the external environment has little impact, and the expected monitoring effect has been achieved. The calculation simulation and on-site monitoring in this paper can provide theoretical and practical guidance for the construction safety under the influence of wind load in the construction process of high-altitude steel-structure hoisting, and provide an important reference value for similar projects.