The hybrid power system is a combination of renewable energy power plants and conventional energy power plants. This integration causes power quality issues including poor settling times and higher transient contents. The main issue of such interconnection is the frequency variations caused in the hybrid power system. Load Frequency Controller (LFC) design ensures the reliable and efficient operation of the power system. The main function of LFC is to maintain the system frequency within safe limits, hence keeping power at a specific range. An LFC should be supported with modern and intelligent control structures for providing the adequate power to the system. This paper presents a comprehensive review of several LFC structures in a diverse configuration of a power system. First of all, an overview of a renewable energy-based power system is provided with a need for the development of LFC. The basic operation was studied in single-area, multi-area and multi-stage power system configurations. Types of controllers developed on different techniques studied with an overview of different control techniques were utilized. The comparative analysis of various controllers and strategies was performed graphically. The future scope of work provided lists the potential areas for conducting further research. Finally, the paper concludes by emphasizing the need for better LFC design in complex power system environments.

Distributed generation connected with AC, DC, or hybrid loads and energy storage systems is known as a microgrid. Campus microgrids are an important load type. A university campus microgrids, usually, contains distributed generation resources, energy storage, and electric vehicles. The main aim of the microgrid is to provide sustainable, economical energy, and a reliable system. The advanced energy management system (AEMS) provides a smooth energy flow to the microgrid. Over the last few years, many studies were carried out to review various aspects such as energy sustainability, demand response strategies, control systems, energy management systems with different types of optimization techniques that are used to optimize the microgrid system. In this paper, a comprehensive review of the energy management system of campus microgrids is presented. In this survey, the existing literature review of different objective functions, renewable energy resources and solution tools are also reviewed. Furthermore, the research directions and related issues to be considered in future microgrid scheduling studies are also presented.

The multiple uncertainties in a microgrid, such as limited photovoltaic generations, ups and downs in the market price, and controlling different loads, are challenging points in managing campus energy with multiple microgrid systems and are a hot topic of research in the current era. Microgrids deployed at multiple campuses can be successfully operated with an exemplary energy management system (EMS) to address these challenges, offering several solutions to minimize the greenhouse gas (GHG) emissions, maintenance costs, and peak load demands of the microgrid infrastructure. This literature survey presents a comparative analysis of multiple campus microgrids’ energy management at different universities in different locations, and it also studies different approaches to managing their peak demand and achieving the maximum output power for campus microgrids. In this paper, the analysis is also focused on managing and addressing the uncertain nature of renewable energies, considering the storage technologies implemented on various campuses. A comparative analysis was also considered for the energy management of campus microgrids, which were investigated with multiple optimization techniques, simulation tools, and different types of energy storage technologies. Finally, the challenges for future research are highlighted, considering campus microgrids’ importance globally. Moreover, this paper is expected to open innovative paths in the future for new researchers working in the domain of campus microgrids.

In the energy system, various sources are used to fulfill the energy demand of large buildings. The energy management of large-scale buildings is very important. The proposed system comprises solar PVs, energy storage systems, and electric vehicles. Demand response (DR) schemes are considered in various studies, but the analysis of the impact of dynamic DR on operational cost has been ignored. So, in this paper, renewable energy resources and storages are integrated considering the demand response strategies such as real-time pricing (RTP), critical peak pricing (CPP), and time of use (ToU). The proposed system is mapped in a linear model and simulated in MATLAB using linear programming (LP). Different case studies are investigated considering the dynamic demand response schemes. Among different schemes, results based on real-time pricing (58% saving) show more saving as compared to the CPP and ToU. The obtained results reduced the operational cost and greenhouse gas (GHG) emissions, which shows the efficacy of the model.

Current energy systems face multiple problems related to inflation in energy prices, reduction of fossil fuels, and greenhouse gas emissions which are disturbing the comfort zone of energy consumers and the affordability of power for large commercial customers. These kinds of problems can be alleviated with the help of optimal planning of demand response policies and with distributed generators in the distribution system. The objective of this article is to give a strategic proposition of an energy management system for a campus microgrid (µG) to minimize the operating costs and to increase the self-consuming energy of the green distributed generators (DGs). To this end, a real-time based campus is considered that currently takes provision of its loads from the utility grid only. According to the proposed given scenario, it will contain solar panels and a wind turbine as non-dispatchable DGs while a diesel generator is considered as a dispatchable DG. It also incorporates an energy storage system with optimal sizing of BESS to tackle the multiple disturbances that arise from solar radiation. The resultant problem of linear mathematics was simulated and plotted in MATLAB with mixed-integer linear programming. Simulation results show that the proposed given model of energy management (EMS) minimizes the grid electricity costs by 668.8 CC/day ($) which is 36.6% of savings for the campus microgrid. The economic prognosis for the campus to give an optimum result for the UET Taxila, Campus was also analyzed. The general effect of a medium-sized solar PV installation on carbon emissions and energy consumption costs was also determined. The substantial environmental and economic benefits compared to the present situation have prompted the campus owners to invest in the DGs and to install large-scale energy storage.

Sustainable agriculture is a pivotal driver of a nation’s economic growth, especially considering the challenge of providing food for the world’s expanding population. Agriculture remains a cornerstone of many nations’ economies, so the need for intelligent, sustainable farming practices has never been greater. Agricultural industries worldwide require sophisticated systems that empower farmers to manage their crops efficiently, reduce water wastage, and optimize yield quality. Yearly, substantial crop losses occur due to unpredictable environmental changes, with improper irrigation practices being a leading cause. In this paper, we introduce an innovative irrigation time control system for smart farming. This system leverages fuzzy logic to regulate the timing of irrigation in cotton crop fields, effectively curbing water wastage while ensuring that crops receive neither too little nor too much water. Additionally, our system addresses a common agricultural challenge: whitefly infestations. Users can adjust climatic parameters, such as temperature and humidity, through our system, which minimizes both whitefly populations and water consumption. We have developed a portable measurement technology that includes air humidity sensors, temperature sensors, and rain sensors. These sensors interface with an Arduino platform, allowing real-time climate data collection. This collected climate data is then sent to the fuzzy logic control system, which dynamically adjusts irrigation timing in response to changing environmental conditions. Our system incorporates an algorithm that generates highly effective (IF-THEN) fuzzy logic rules, significantly improving irrigation efficiency by reducing overall irrigation duration. By automating the irrigation process and precisely delivering the right amount of water, our system eliminates the need for human intervention, rendering the agricultural system more dependable in achieving successful crop yields. Water supply commences when the environmental conditions reach specific thresholds and halts when the requisite climate conditions are met, maintaining an optimal environment for crop growth.