The proposed work addresses the modeling, control, energy management and operation of hybrid grid connected system with wind-PV-Battery Energy Storage System (BESS) integrated with Fuel Cell (FC) and Electrolyzer. A hybrid PV-Wind-FC with electrolyzer consisting of BESS with the least number of control loops and converters has been proposed. The proposed hybrid system presents a cost efficient solution for integrating PV into a hybrid system by eliminating the PV converter. This includes the design of controllers for grid-connected hybrid systems with a renewable distributed generator (Wind and PV) as a primary source, BESS as a secondary source and FC with Electrolyzer as a tertiary source. In addition, the lead compensator along with integrator is used for obtaining enough phase margin and removing steady state error completely. It increases the stability of the controller and adds phase shift $\varphi _{s}$ at a cross gain frequency ( $\omega _{cut}$ ). The Grid Side Controller (GSC) is capable of providing frequency support to the utility grid, when it is linked to the grid. In the proposed configuration, PV power is maximized and injected into grid through GSC. Rotor Side Converter (RSC) and GSC ensure the support for sharing the burden of the grid station. Moreover, the proposed controller of BESS with coordination of FC eliminates the effect of intermittency of power generated from wind and PV. Excess power production by renewable distribution generation is used by Electrolyzer to generate hydrogen. This hydrogen is further used by FC when there is not enough power generation due to unfavorable weather conditions. The energy management has been presented to fulfill the load profile, avoid BESS overcharging and to minimize the intermittency and fluctuation of Wind and PV sources. This method guarantees steady power flow and service continuity. The Simulink model of the proposed system results validate the efficiency of the proposed hybrid system as compared to the conventional hybrid system reported in the literature. The modeling of the proposed system and analysis has been demonstrated using the MATLAB Simulink model. Lastly, the energy management of the system has also been examined and compared with the conventional power system.

The hybrid power system is a combination of renewable energy power plants and conventional energy power plants. This integration causes power quality issues including poor settling times and higher transient contents. The main issue of such interconnection is the frequency variations caused in the hybrid power system. Load Frequency Controller (LFC) design ensures the reliable and efficient operation of the power system. The main function of LFC is to maintain the system frequency within safe limits, hence keeping power at a specific range. An LFC should be supported with modern and intelligent control structures for providing the adequate power to the system. This paper presents a comprehensive review of several LFC structures in a diverse configuration of a power system. First of all, an overview of a renewable energy-based power system is provided with a need for the development of LFC. The basic operation was studied in single-area, multi-area and multi-stage power system configurations. Types of controllers developed on different techniques studied with an overview of different control techniques were utilized. The comparative analysis of various controllers and strategies was performed graphically. The future scope of work provided lists the potential areas for conducting further research. Finally, the paper concludes by emphasizing the need for better LFC design in complex power system environments.

Cooperative control consensus is one of the most actively studied topics within the realm of multi-agent systems. It generally aims to drive multi-agent systems to achieve a common group objective. The core aim of this paper is to promote research in cooperative control community by presenting the latest trends in this field. A summary of theoretical results regarding consensus for agreement analysis for complex dynamic systems and time-invariant information exchange topologies is briefly described in a unified way. The application under both non-formation and formation cooperative control consensus for multi-agent system also investigated. In addition, future recommendations and some open problems are also proposed.

The challenge of controlling frequency becomes greater as the complexity of a power network increases. The stability of a power system is highly dependent upon the robustness of the controller. This paper presents automatic generation control (AGC) of a four-area interconnected power system along with integrated renewable energy sources of PV and wind energy. The designed model is a challenge given the increased penetration levels of PV and wind along with a thermal-hydropower system. The addition of a hydropower system as a fourth type results in the pole of the open loop system of the hydropower system being located at the right half side of the s-plan. This demands a robust control. A novel MPC-(1 + PIDN) is designed for high-order interconnected areas (HOIA) to stabilize the frequency in a robust way. The salp swarm algorithm is adopted to optimize the parameters of the PIDN controller. The performance of the proposed controller under HOIA is tested in a unbalanced load environment with uncertainty in the power system. The proposed controller can effectively handle the frequency disruption by stabilizing it in $$0.86 s$$0.86 s for Area-1, $$1.08 s$$1.08 s for Area-2, $$0.81 s$$0.81 s for Area-3, and $$0.84 s$$0.84 s for Area-4 with an average time of $$0.89 s$$0.89 s for all the areas, whereas the average time for GWO: PI-PD, MPC/PI and GA-PI is $$3.48 s$$3.48 s , $$10.36 s$$10.36 s and $$18.47 s$$18.47 s , respectively. The results demonstrate the effectiveness of the controller when compared to other controllers.