This tutorial highlights challenges and opportunities in achieving efficient flexible optical networks. Optical signal processing may potentially increase network flexibility because of its functions' transparency, tunability, and reconfigurability. We review recent advances in high-speed optical signal processing techniques that might enable flexible networks. Various optical approaches that enable key functions are discussed, including format conversion, increases in spectral efficiency, and phase-sensitive operations. We also discuss the potential utilization of basic enabling technologies, such as optical frequency combs and optical nonlinear devices.

In this paper, we experimentally demonstrate the mitigation of atmospheric turbulence effects using phase patterns that apply the inverse transmission matrix for pre-compensation in the 200-Gbit/s free-space orbital angular momentum (OAM) multiplexed optical link. In this link, two OAM channels are multiplexed, each carrying a 100-Gbit/s quadrature-phase shift keying (QPSK) signal. In the uni-directional (forward) link, a combination of two OAM modes is generated using a designed phase pattern in each of the two channels. After the two channels are multiplexed, each OAM mode will carry the combination of signals from both channels. Such beams could perform the inverse function of turbulence induced crosstalk. We explore the link performances including crosstalk and bit error rate (BER) under 6 different turbulence realizations with a Fried parameter of 1-mm. We find the following: (a) the inter-channel crosstalk is reduced by up to 21 dB; (b) the inter-channel crosstalk is below -10 dB for the 6 turbulence realizations when the compensation is applied; (c) a BER below the FEC limit could be realized for the 6 turbulence realizations with an optical signal-to-noise ratio (OSNR) of 16.8 dB for the uni-directional link with the compensation. Moreover, the post-compensation is also investigated for the two 100-Gbit/s OAM-multiplexed backward channels in the bi-directional link. For the backward channels, the phase patterns are used to mitigate turbulence induced crosstalk at the receiver for backward channels, and the inter-channel crosstalk is reduced by up to 16 dB.

The paper presents the flutter and limit-cycle oscillation (LCO) tests of the Pazy wing, a very flexible wing model designed to study aeroelastic phenomena associated with nonlinear geometry and pr...

In this paper, we explore the potential benefits and limitations of using transmitter lenses in an orbital-angular-momentum (OAM)-multiplexed free-space optical (FSO) communication link. Both simulation and experimental results indicate that within certain transmission distances, using lenses at the transmitter to focus OAM beams could reduce power loss in OAM-based FSO links and that this improvement might be more significant for higher-order OAM beams. Moreover, the use of transmitter lenses could enhance system tolerance to angular error between transmitter and receiver, but they might degrade tolerance to lateral displacement.

Coherent detection can provide enhanced receiver sensitivity and spectral efficiency in free-space optical (FSO) communications. However, turbulence can cause modal power coupling effects on a Gaussian data beam and significantly degrade the mixing efficiency between the data beam and a Gaussian local oscillator (LO) in the coherent detector. Specifically, for widely used single-mode-fiber (SMF)-coupled coherent detectors, such degradation is mainly caused by the significantly reduced efficiency when coupling the multi-mode data beam into the SMF. Optical phase conjugation (OPC) in a photorefractive crystal can “automatically” mitigate turbulence by (a) recording a back-propagated turbulence-distorted probe beam, and (b) creating a phase-conjugate beam that has the inverse phase distortion of the medium as the transmitted data beam. However, previously reported crystal-based OPC approaches for FSO links have demonstrated either: (1) a relatively fast response time of 35 ms but at a relatively low data rate (e.g., 60s). Here, we report an OPC approach for the automatic mitigation of dynamic turbulence that enables both a high data rate (8 Gbit/s) data beam and a rapid (<5ms) response time. For a similar data rate, this represents a 10,000-fold faster response time than previous reports, thereby enabling mitigation for dynamic effects. In our approach, the transmitted pre-distorted phase-conjugate data beam is generated by four-wave mixing in a GaAs crystal of three input beams: a turbulence-distorted probe beam, a Gaussian reference beam regenerated from the probe beam, and a Gaussian data beam carrying a high-speed data channel. We experimentally demonstrate our approach in an 8-Gbit/s quadrature-phase-shift-keying coherent FSO link through emulated dynamic turbulence. Our results show an up to ∼10-dB improvement in the free-space-to-SMF coupling efficiency for the data beam under dynamic turbulence with a bandwidth of up to ∼260Hz (Greenwood frequency). Our approach has the potential to significantly increase the resilience of high-performance coherent FSO links to turbulence.

We experimentally investigate the dependence of Kerr comb generation, comb linewidth, and coherent system performance on the pump linewidth in a microresonator. We find that the generation of the primary comb can have a larger tolerance to the pump linewidth compared with that of the low-phase-noise comb. In addition, the linewidths of the generated combs are almost linearly dependent on the pump linewidth in the primary and low-phase-noise states. Furthermore, the optical signal-to-noise ratio penalty between the pump and generated Kerr combs in a coherent communication system is less than 0.2 dB in both the primary and low-phase-noise states, showing that Kerr frequency combs in these two states can have similar coherent system performance to the pump.