Chen Chen

Dr. Chen Chen


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2013
Verified
Conference Paper
Closed access
QSQiang Shen
Qiang Shen
JLJing Liu
Jing Liu
HYHui Yu
Hui Yu
Zhichao MaZhichao Ma
Zhichao Ma
MLMing Li
Ming Li
CCChen Chen
Chen Chen
Rapid development in wireless sensor device manufacture technologies has made it possible to conglutinate and implant the medical sensors on human body. The improvement of these technologies can be applied to wireless body area network (WBAN) on medical applications. A uniform standard in the field of WBAN, IEEE 802.15.6 has been released recently by IEEE 802.15 TG 6 group, indicating that WBAN will play an important role in future E-health medical system field. This paper presents a WBAN validation platform, Adaptive Cognitive Enhanced Platform (ACEP), which is based on IEEE 802.15.6 and works in the spectrum of Industrial Scientific and Medical (ISM) 2.4GHz band. However, other wireless services occupying ISM band, such as WiFi, Bluetooth and Zigbee will cause great interference to low power, low data rate medical WBANs deployed nearby. To build the realistic co-channel interference scenario, a WiFi network working on the same spectrum is utilized. Furthermore, to strengthen WBAN's robustness against interference caused by WiFi, we have proposed and implemented a fast dynamic cognitive radio (FDCR) algorithm to stagger the spectrum accessing time, which offers an efficient method for coexistence of WBAN and other wireless systems. Through calculating the indicated WiFi temporal white-spaces for WBAN communication, FDCR algorithm minimizes the impact of co-channel interference and promotes resource allocation efficiency. Our simulation and platform validation experiments show that the proposed FDCR algorithm can greatly decrease packets drop rate and improve channel utilization.

30 May 2024 in IEEE Signal Processing Letters
Verified
Journal Article
Closed access
GLGuo-Jun Liao
Guo-Jun Liao
LZLin Zhou
Lin Zhou
RARan An
Ran An
CCChen Chen
Chen Chen
XXXian-Zhong Xie
Xian-Zhong Xie
This letter proposes a high-order probabilistic shaped (PS) system for joint source-channel coding (JSCC) using polar codes, which are employed for both source compression and channel coding. The modulation is based on a selection rule derived from the proposed bit classification distribution matching (BCDM) algorithm. An external binary random sequence is used to select and redundantly insert the codeword sequence, which makes the modulation symbol probability approach the Gaussian distribution, instead of being uniformly distributed as in the conventional constellation mapping. At the receiver, a joint belief propagation (JBP) decoder, which consists of a source and a channel BP decoder, is applied. Simulation results demonstrate that the proposed PS joint source-channel polar-coded modulation (PS-JSCPCM) system yields a significant enhancement to the bit error rate (BER) performance compared with the traditional unshaped joint source-channel code-modulation (JSCCM) system.

29 March 2023 in Entropy
Verified
Journal Article
Open access
PDF file
CCChen Chen
Chen Chen
Qiwang ChenQiwang Chen
Qiwang Chen
SLSanya Liu
Sanya Liu
LZLin Zhou
Lin Zhou
By using the residual source redundancy to achieve the shaping gain, a joint source-channel coded modulation (JSCCM) system has been proposed as a new solution for probabilistic amplitude shaping (PAS). However, the source and channel codes in the JSCCM system should be designed specifically for a given source probability to ensure optimal PAS performance, which is undesirable for systems with dynamically changing source probabilities. In this paper, we propose a new shaping scheme by optimizing the bit-labeling of the JSCCM system. Instead of the conventional fixed labeling, the proposed bit-labelings are adaptively designed according to the source probability and the source code. Since it is simple to switch between different labelings according to the source probability and the source code, the proposed design can be considered as a promising low complexity alternative to obtain the shaping gain for sources with different probabilities. Numerical results show that the proposed bit-labelings can significantly improve the bit-error rate (BER) performance of the JSCCM system.

15 February 2023 in Entropy
Verified
Journal Article
Open access
PDF file
Qiwang ChenQiwang Chen
Qiwang Chen
YRYanzhao Ren
Yanzhao Ren
LZLin Zhou
Lin Zhou
CCChen Chen
Chen Chen
SLSanya Liu
Sanya Liu
In this paper, a joint group shuffled scheduling decoding (JGSSD) algorithm for a joint source-channel coding (JSCC) scheme based on double low-density parity-check (D-LDPC) codes is presented. The proposed algorithm considers the D-LDPC coding structure as a whole and applies shuffled scheduling to each group; the grouping relies on the types or the length of the variable nodes (VNs). By comparison, the conventional shuffled scheduling decoding algorithm can be regarded as a special case of this proposed algorithm. A novel joint extrinsic information transfer (JEXIT) algorithm for the D-LDPC codes system with the JGSSD algorithm is proposed, by which the source and channel decoding are calculated with different grouping strategies to analyze the effects of the grouping strategy. Simulation results and comparisons verify the superiority of the JGSSD algorithm, which can adaptively trade off the decoding performance, complexity and latency.

9 June 2023 in Electronics
Verified
Journal Article
Open access
PDF file
CCChen Chen
Chen Chen
SLSanya Liu
Sanya Liu
Qiwang ChenQiwang Chen
Qiwang Chen
ZXZhiping Xu
Zhiping Xu
Using the source residual redundancy in a joint source and channel coded modulation (JSCCM) system to achieve a shaping gain has proven to be a good solution for probabilistic amplitude shaping. In a JSCCM system, rate-compatible source codes are essential for adapting to dynamically changing source probabilities. However, conventional rate-compatible source codes are not appropriate for JSCCM systems, since they may yield a loss in the shaping gain. Moreover, a code design that depends solely on the source decoding threshold appears to be ill suited, thus complicating the search for good source codes. In this paper, we propose a rate-compatible family of source codes for JSCCM systems based on an achievable system rate analysis and the source protograph extrinsic information transfer (PEXIT) algorithm. The proposed codes not only have good source decoding thresholds but also obtain shaping gains over the whole considered range of source probabilities. Numerical results show that the proposed rate-compatible family of source codes can significantly improve the bit-error-rate (BER) performance of the JSCCM system.

7 April 2026 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
CCChen Chen
Chen Chen
JCJiaofan Cai
Jiaofan Cai
Qiwang ChenQiwang Chen
Qiwang Chen
JZJia Zhan
Jia Zhan
YI FANGYI FANG
YI FANG
Bit-interleaved coded modulation with iterative decoding (BICM-ID) is a key technology enabling communication systems to realize high-throughput and high-reliability. In contrast to previous studies focused exclusively on uniformly distributed sources, this work investigates irregular mapping (IM)-based BICM-ID systems for sources with non-uniform distributions. First, a density evolution (DE) algorithm based on Gaussian weighted mixture approximation (GWMA) is put forward to estimate the convergence performance of the IM-BICM-ID systems with non-uniform sources, where the probability density function of the log-likelihood ratio messages output from the bit-level channels in this system is neither Gaussian nor symmetric. Then, by employing the GWMA-DE algorithm and the achievable system rates analysis, a design strategy for optimal IM labelings is established, which utilizes the inherent redundancy in non-uniform sources to achieve shaping gains. Furthermore, channel codes tailored to the proposed IM labelings are designed to further improve the bit error rate performance. Both analytical results and simulations indicate that the proposed labelings and codes outperform existing counterparts in IM-BICM-ID systems with non-uniform sources.