Iodine is a nuclide of crucial concern in radioactive waste management. Nanomaterials selectively adsorb iodine from water; however, the efficient application of nanomaterials in engineering still needs to be developed for radioactive wastewater deiodination. Artemia egg shells possess large surface groups and connecting pores, providing a new biomaterial to remove contaminants. Based on the Artemia egg shell-derived biochar (AES biochar) and in situ precipitation and reduction of cuprous, we synthesized a novel nanocomposite, namely porous biochar-confined nano-Cu2O/Cu0 (C-Cu). The characterization of C-Cu confirmed that the nano-Cu2O/Cu0 was dispersed in the pores of AES biochar, serving in the efficient and selective adsorption of iodide and iodate ions from water. The iodide ion removal by C-Cu when equilibrated for 40 min exhibited high removal efficiency over the wide pH range of 4 to 10. Remarkable selectivity towards both iodide and iodate ions of C-Cu was permitted against competing anions (Cl−/NO3−/SO42−) at high concentrations. The applicability of C-Cu was demonstrated by a packed column test with treated effluents of 1279 BV. The rapid and selective removal of iodide and iodate ions from water is attributed to nanoparticles confined on the AES biochar and pore-facilitated mass transfer. Combining the advantages of the porous biochar and nano-Cu2O/Cu0, the use of C-Cu offers a promising method of iodine removal from water in engineering applications.
Cement solidification is a main technique for radioactive waste treatment to reduce its risk to the environment and human health. However, this method underperforms when dealing with spent radioactive ion-exchange resin, taking much space, and costing much money for final disposal. In this work, simulated spent radioactive resin was solidified using a metakaolin-reinforced sulfoaluminate cement system, which was optimized by a mixture design based on the effects of components and parameters, and the durability of solidified wasteforms was assessed in terms of strength and Cs(I) leaching. Solidified by an optimized formula of 40 wt.% spent resin, 55.8 wt.% sulfoaluminate cement, 2.2 wt.% metakaolin, and 2 wt.% water reducer, the resin loading in wasteforms reached 64% and the compressive strength 13.7 MPa. The dominant mineral phases of hydration products were ettringite crystalline of acicular and columnar morphology, with small amounts of scattered amorphous clusters of aluminum gels and C–S–H gels. Metakaolin, a source of aluminum, promoted the growth of ettringite, which facilitated (1) the encapsulation of resin beads with high strengths, even in acidic environments or during frequent freezing-thawing, and (2) the retention of Cs(I), with a 42 day leaching rate of 2.3 × 10−4 cm/day. This work offers a technical justification for spent resin solidification in the metakaolin-reinforced sulfoaluminate cement system, which is an applicational solution for the efficient treatment of radioactive waste.
Dealing with mariculture wastewater that contains high nitrogenous compounds with efficient biological nitrogen removal technology is challenging but meaningful. The key lies in developing an active microorganism that can spontaneously complete the nitrification–denitrification processes in the marine environment. Herein, a halotolerant heterotrophic nitrification–aerobic denitrification (HN-AD) bacterium of Vibrio sp. LY1024 with good nitrogen removal capacity is domesticated to achieve the aforementioned goal. As a result, ammonium (NH4+-N) and nitrate (NO3−-N) removal rates of almost 100% and 98.5% are detected over Vibrio sp. LY1024 at the salinity of 3.5%, even further increasing the salinity of wastewater to 5.5%. Its removal capacity towards both NH4+-N and NO3−-N can still maintain at almost 100% and 94.7%, respectively. Further combining these results with those of intermediate product determination, it can be speculated that the ammonium removal is according to the pathway of NH4+-N → NH2OH → NO3−-N → N2O → N2. Moreover, the influence of wastewater temperature on the nitrogen removal efficiency of Vibrio sp. LY1024 is also considered. The NH4+-N and NO3−-N removal efficiency over Vibrio sp. LY1024 at a relatively low temperature of 15 °C is still up to 97.3% and 76.4%, respectively. Our work provides a promising halotolerant and low-temperature resistance microorganism for the treatment of mariculture wastewater.
Chromium-containing wastewater poses severe threats to ecosystems and human health due to the high toxicity of hexavalent chromium (Cr(VI)). Although iron oxide nanoparticles (IONPs) show promise for Cr(VI) removal, their practical application is hindered by challenges in recovery and reuse. Herein, a novel three-dimensional porous nanocomposite, Artemia cyst shell biochar-supported iron oxide nanoparticles (ACSC@ IONP), was synthesized via synchronous pyrolysis of Fe3+-impregnated Artemia cyst shells (ACSs) and in situ reduction of iron. The optimized composite C@Fe-3, prepared with 1 mol/L Fe3+ and pyrolyzed at 450 °C for 5 h, exhibited rapid removal equilibrium within 5–10 min for both Cr(VI) and total chromium (Cr(total)), attributed to synergistic reduction of Cr(VI) to Cr(III) and adsorption of Cr(VI) and Cr(III). The maximum Cr(total) adsorption capacity was 110.1 mg/g at pH 2, as determined by the Sips isothermal model for heterogeneous adsorption. Competitive experiments demonstrated robust selectivity for Cr(VI) removal even under a 64-fold excess of competing anions, with an interference order of SO42− > NO3− > Cl−. Remarkably, C@Fe-3 retained 65% Cr(VI) removal efficiency after four adsorption–desorption cycles. This study provides a scalable and eco-friendly strategy for fabricating reusable adsorbents with dual functionality for chromium remediation.