A polyvinylidene fluoride (PVDF)-type chelating membrane bearing poly(amino phosphonic acid) groups, denoted as ethylenediamine tetra(methylene phosphonic acid) (EDTMPA)-tetrabutyl orthotitanate (TBOT)/PVDF, was employed to remove Ni(II) from the aqueous solution. The effects of coexisting Ca(II), Pb(II), citrate, nitrilotriacetic acid (NTA) and ethylenediaminetetraacetic acid (EDTA) on the Ni(II) adsorption by this chelating membrane were revealed using density functional theory (DFT) calculations. Pb(II) showed a more detrimental effect than Ca(II) on the Ni(II) uptake; EDTA interfered with the capture of Ni(II) more remarkably than citrate and NTA. The results derived from DFT calculations were consistent with the experimental data. Ni(II) and Pb(II) showed more excellent affinity to the EDTMPA-TBOT/PVDF membrane than Ca(II). The stabilities between Ni(II) and the [EDTMPA-TBOT]7− chelating ligand of the membrane and those between Ni(II) and the three aforementioned complexing reagents followed the sequence: [Ni(II)-(EDTMPA-TBOT)]5− > Ni(II)-EDTA > Ni(II)-NTA > Ni(II)-citrate. The complexation between Ni(II) and the chelating membrane was prominent with the presence of citrate, NTA and EDTA.
Dealing with mariculture wastewater that contains high nitrogenous compounds with efficient biological nitrogen removal technology is challenging but meaningful. The key lies in developing an active microorganism that can spontaneously complete the nitrification–denitrification processes in the marine environment. Herein, a halotolerant heterotrophic nitrification–aerobic denitrification (HN-AD) bacterium of Vibrio sp. LY1024 with good nitrogen removal capacity is domesticated to achieve the aforementioned goal. As a result, ammonium (NH4+-N) and nitrate (NO3−-N) removal rates of almost 100% and 98.5% are detected over Vibrio sp. LY1024 at the salinity of 3.5%, even further increasing the salinity of wastewater to 5.5%. Its removal capacity towards both NH4+-N and NO3−-N can still maintain at almost 100% and 94.7%, respectively. Further combining these results with those of intermediate product determination, it can be speculated that the ammonium removal is according to the pathway of NH4+-N → NH2OH → NO3−-N → N2O → N2. Moreover, the influence of wastewater temperature on the nitrogen removal efficiency of Vibrio sp. LY1024 is also considered. The NH4+-N and NO3−-N removal efficiency over Vibrio sp. LY1024 at a relatively low temperature of 15 °C is still up to 97.3% and 76.4%, respectively. Our work provides a promising halotolerant and low-temperature resistance microorganism for the treatment of mariculture wastewater.
A type of iron-doped titania thin film was prepared by means of sol-gel method to degrade indoor formaldehyde (HCHO), ammonia (NH3), and benzene (C6H6) under sunlight. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Vis spectroscopy, and energy dispersive spetra (EDS). The results showed that the iron was doped in the TiO2photocatalyst successfully. The absorption edge of doped TiO2had red shifts and the doped TiO2had a stronger absorption than the pure TiO2in the visible region. Fe-doped TiO2thin film prepared with the optimal preparation condition could remove indoor HCHO, NH3and C6H6effectively under solar light irradiation. The removal percentage of HCHO, NH3or C6H6after 9 h photocatalytic reaction under solar light reached 55%, 53.1%, and 37.5%, respectively, when they existed in the air individually. When the three pollutants were mixed in the air, the removal percentage decreased to 33.3%, 28.3%, and 28%. The degradation reaction of the three pollutants followed the pseudo first-order kinetics, which reflects that the photocatalytic reaction was controlled by the surface chemical reaction and the reaction rate was controlled by concentration of reactants.
This research introduces a synergistic photoelectrocatalytic (PEC) system designed for the effective degradation of tetracycline (TC), integrating a PO43−-grafted Mo-doped BiVO4 (PO43−-Mo:BiVO4) photoanode with a Pd-loaded ordered mesoporous carbon (Pd/CMK-3) cathode. The incorporation of Mo doping and PO43− modification significantly improved the photoanode’s charge separation efficiency, achieving a photocurrent density of 2.9 mA cm−2, and fine-tuned its band structure to enhance hydroxyl radical (·OH) generation. Meanwhile, the Pd/CMK-3 cathode promoted a two-electron oxygen reduction reaction pathway, producing hydrogen peroxide (H2O2) and facilitating molecular oxygen activation via atomic hydrogen (H*) intermediates. Under optimized conditions—1.0 V vs. Ag/AgCl of anodic potential, pH 6.58, and oxygen saturation—the combined system accomplished 80% TC degradation within 60 min, markedly surpassing the performance of the photoanode (72%) or cathode (71%) alone. Notably, this synergistic approach also reduced energy consumption to 0.0065 kWh m−3, outperforming individual components. Radical quenching experiments and liquid chromatography–mass spectrometry (LC-MS) analysis revealed that the photogenerated holes (h+) and ·OH were the key reactive species responsible for TC mineralization. The system demonstrated remarkable stability, with only a 2.96% decline in activity, and effectively degraded other contaminants, such as phenol, 4-chlorophenol, and ciprofloxacin. This study highlights an energy-efficient PEC strategy that harnesses the combined strengths of anodic oxidation and cathodic molecular oxygen activation to significantly enhance the removal of organic pollutants.
1 January 2018 in International Journal of Information and Education Technology