Jiatong Ling

Ms. Jiatong Ling

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JLJiatong Ling
Jiatong Ling
Ke FengKe Feng
Ke Feng
Teng WangTeng Wang
Teng Wang
MLMin Liao
Min Liao
CYChunsheng Yang
Chunsheng Yang
Zheng LiuZheng Liu
Zheng Liu
Pipelines are economical and efficient modes of transporting oil and gas. Pipelines will inevitably confront various risk factors through their lifespan, which could lead to defects. Defects in pipelines can compromise the integrity of the pipeline systems and may result in catastrophic accidents. Thus, it is vital to conduct the integrity assessment of pipelines so that the safe operation of the pipelines can be ensured. Up to the present, widely used approaches for pipeline integrity assessment include defect characterization, growth rate prediction, and failure pressure evaluation. Although the theoretical developments of pipeline integrity assessment methods have yielded fruitful achievements and significantly benefit the industry practices, there is still a lack of a systematic review covering the whole process from data collection to model establishment of the pipeline integrity assessment. Therefore, a comprehensive review is conducted in this paper on the pipeline defect integrity assessment from the data modeling perspective. Firstly, the description of data required to construct pipeline defect integrity assessment models is presented, where the required data for modeling can be obtained from pipeline inspection measurements, monitoring sensors, testing experiments, etc. Then, different modeling techniques applied to pipeline integrity assessment are reviewed, which are classified into physics-based models, data-driven models, and multi-model fusion. Also, the advantages and limitations of these techniques are discussed. Finally, the possibility of applying the existing models to a digital twin of pipeline defect is explored. This paper aims to provide a guideline for researchers to select optimal models according to data availability and research requirements, which can benefit the research community, as well as, the industry.

22 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
MZMeng Zhang
Meng Zhang
JLJiatong Ling
Jiatong Ling
BTBuyun Tang
Buyun Tang
SDShao-Hua Dong
Shao-Hua Dong
LZLaibin Zhang
Laibin Zhang
Pipelines that cross complex geological terrains are inevitably threatened by natural hazards, among which landslide attracts extensive attention when pipelines cross mountainous areas. The landslides are typically associated with ground movements that would induce additional stress on the pipeline. Such stress state of pipelines under landslide interference seriously damage structural integrity of the pipeline. Up to the date, limited research has been done on the combined landslide hazard and pipeline stress state analysis. In this paper, a multi-parameter integrated monitoring system was developed for the pipeline stress-strain state and landslide deformation monitoring. Also, data-driven models for the pipeline additional stress prediction was established. The developed predictive models include individual and ensemble-based machine learning approaches. The implementation procedure of the predictive models integrates the field data measured by the monitoring system, with k-fold cross validation used for the generalization performance evaluation. The obtained results indicate that the XGBoost model has the highest performance in the prediction of the additional stress. Besides, the significance of the input variables is determined through sensitivity analyses by using feature importance criteria. Thus, the integrated monitoring system together with the XGBoost prediction method is beneficial to modeling the additional stress in oil and gas pipelines, which will further contribute to pipeline geohazards monitoring management.

23 October 2024 in NDT & E International
Verified
Journal Article
Open access
JLJiatong Ling
Jiatong Ling
XPXiang Peng
Xiang Peng
MPMatthias Peussner
Matthias Peussner
KSKevin Siggers
Kevin Siggers
Zheng LiuZheng Liu
Zheng Liu

1 January 2023 in AIP Advances
Verified
Journal Article
Open access
PDF file
GPGuanyu Piao
Guanyu Piao
JLJiatong Ling
Jiatong Ling
JLJiaoyang LI
Jiaoyang LI
Ferromagnetic materials are widely used in infrastructure, such as steam generators, storage tanks, and gas pipelines. During their service time, ferromagnetic materials are subject to deterioration and defects are prone to generate which could damage infrastructures and cause catastrophic accidents. Magnetic flux leakage (MFL) is one of the widely used nondestructive evaluation (NDE) methods to detect and characterize defects in ferromagnetic materials to ensure infrastructure safety. However, many research works have been carried out on the modeling, classification, and characterization of a single defect, while the scenario of coexisting defects is ignored. In practical field, the coexistence of surface and subsurface defects within an overlapping area can cause much earlier than expected deterioration or even penetration, the result of which is more damaging. Here, we propose a convolutional neural network (CNN) based deep learning method to differentiate between single defect and coexisting defects scenarios and estimate the defect sizes including length, width, and depth. Finite-element-method (FEM) simulation models are developed to investigate the effect of coexisting defects on the measured MFL data. The models with different defect parameters are calculated to generate 354 MFL data for the training and testing of deep learning method. The experimental results show that the classification accuracy of deep learning method is over 94% and higher than the traditional machine learning methods, and the defect size estimation errors are within 0.97 mm, 0.59 mm, and 3.67% of wall thickness, respectively, which are validated to be a good classification and characterization tool for the coexisting defects scenario.

9 May 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JLJiatong Ling
Jiatong Ling
RRRakiba Rayhana
Rakiba Rayhana
Zheng LiuZheng Liu
Zheng Liu
MLMin Liao
Min Liao
CYChunsheng Yang
Chunsheng Yang
CWChristian Wunderlich
Christian Wunderlich
Corrosion is an irreversible form of damage to pipe materials, which leads to the degradation of their mechanical and chemical properties. Corrosion damage reduces the lifespan of materials and, in some cases, can even lead to catastrophic failures. Therefore, it is essential to detect corrosion damages and develop effective preventative measures to maintain the structural integrity of the pipelines. In recent times, ultrasonic guided wave testing techniques have been employed to detect and monitor corrosion damage as they are useful for scanning large areas and conducting tomographic analyses. The obtained guided wave signals are then analyzed using the Reconstruction Algorithm for Probabilistic Inspection of Damage (RAPID) to obtain imaging of the damages. However, conventional RAPID assigns the same signal difference coefficient to all reconstruction points along a sensing path, which limits its ability to capture localized signal variations. In addition, it lacks a mechanism for evaluating signal reliability, making it prone to false positives caused by noise. Thus, this paper proposes an improved RAPID-based algorithm by employing a local signal difference coefficient (LSDC) and reliability coefficient (RC) to ensure that damage is accurately detected. The LSDC is employed to enhance the sensitivity to damage by capturing localized signal variations, while the RC is developed to weigh the signal reliability. The experimental results demonstrate that the proposed method accurately predicts corrosion locations. It maintained a strong overlap between the predicted and the actual defect locations, with an overlapping rate between 73.02% and 79.43% throughout all cycles.

20 June 2025 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
JLJiatong Ling
Jiatong Ling
MPMatthias Peussner
Matthias Peussner
XPXiang Peng
Xiang Peng
KSKevin Siggers
Kevin Siggers
HYHongguang Yun
Hongguang Yun
Zheng LiuZheng Liu
Zheng Liu
Detecting and accurately locating defects through nondestructive inspection (NDI) is critical for maintaining pipeline integrity. Employing multiple NDI techniques on the same pipeline enhances inspection reliability, especially when dealing with complex, degraded structures. However, misalignments between data acquired from different sensing modalities present a significant challenge. Achieving effective data registration that ensures spatial alignment of these multimodal measurements is difficult due to the diverse underlying physical principles and the nonlinear, multimodal nature of the resulting signals. This study proposes an automated registration method for magnetic flux leakage (MFL) and ultrasonic testing (UT) inspection data. First, a generative adversarial network (GAN) is employed to translate UT data into the MFL domain, harmonizing the multimodal data into a consistent physical space and improving cross-modality similarity. Next, the registration parameters are optimized by applying a difference metric that minimizes the gradient of the difference map between the translated and measured MFL images. Experimental results demonstrate that this GAN-based translation, combined with the gradient-guided difference metric, improves registration accuracy. The resulting alignment of the MFL and UT data enables reliable subsequent data integration.