In recent years providing potable water for humans has become a major problem, especially in rural and remote regions. In the last few decades, methods of providing potable water using solar radiation have proved that there are methods without negative impacts. Solar is a solution and attractive alternative to still non-potable water without adverse consequences on ecosystems. Researchers have presented the results of their investigations in journals, using experimental, numerical, and analytical forms through the study of solar still performance in native climatic conditions. This paper undertakes an extensive review of recent modeling processes in solar stills and the thermal models proposed and derived for different types of solar stills and the modifications recommended to enhance efficiency and performance. During the selection of appropriate geometry and belonging components, this evaluation demonstrates that numerous designs and characteristics are useful in terms of productivity and efficiency. According to the reviewed results, the definition of concentration ratio is a fundamental concept for evaluating the evaporative heat transfer coefficient in relation to the convective heat transfer coefficient. Employing phase change materials, the results reveal that a large mass of PCM produces less solar still productivity, whereas increasing the PCM to water mass ratio from 10 to 100 reduces productivity by up to 30%. Using a parabolic concentrator, results show that productivity can be increased by 56 and 38.5% in the winter and summer, respectively.
6 December 2022 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Traditional strategies for improving heat transmission in industrial systems include nanofluids and porous inserts. In these kinds of systems, increasing the rate of thermal transmission can also be accomplished by utilizing porous materials that have a higher thermal conductance.
Al
2
O
3 , CuO, and ZnO in engine oil (20w50) nanofluid are studied numerically in three dimensions to see how they affect forced convection in a porous media oil cooler. Within the oil cooler, the porous medium was placed. A two-phase mixture model was used in conjunction with the Darcy–Brinkman–Forchheimer equation indicating the drag forces to simulate nanofluid flow in porous media. In addition, utilizing temperature laboratory data, a more specific thermophysical feature of the fluid was identified and characterized. ANSYS-FLUENT, a commercial computational fluid dynamics (CFD) software, is used to partition the governing equations using the finite volume method. In addition, the thermal boundary parameters of the oil cooler walls were made to be temporally constant and spatially uniform. The effects of varying volume fractions (ranging from 0% to 5%), Darcy number (ranging from 10 −2 to 10 2 ), overall Nusselt number, pressure reduction, and the performance evaluation criteria (PEC) were analyzed and compared for a variety of distinct nanoparticles. The increased Darcy number (10 −2 to 10 2 ) had a significant effect on the enhanced heat transfer coefficient, according to the data. In light of the findings, it can be deduced that the high-volume percentage of the nanoparticles will improve thermal transmission and, more significantly, the PEC factor. Furthermore, the given variables were compared, leading to the creation of diagrams for different variables.
8 November 2021 in International Journal of Photoenergy
In recent years, producing energy and potable water has become a contemporaneous issue in all areas, especially in rural and remote areas. It is due to the limitation of fossil fuels in generating energy and the daily increase of potable water topic pollution due to various development activities in the industries. Gradually, the use of renewable energies has been suggested as far as humans focus on using these energies in various activities, which is gratis and accessible in more areas without having negative anthropogenic hazards. Solar radiation has an important position in renewable energies and has played a significant role in the desalination process due to the convenience in applying and abundance in the areas with potable water shortages. However, one of the active solar stills is the coupling of conventional solar still with a flat plate collector. In this type, a flat plate collector is used to raise the temperature of saline water which increases the productivity. In this research, the solar still coupled with a flat plate collector is reviewed as the active solar still and the affecting parameters on its performance and efficiency are discussed. First, a summary of working research and their research of flat plate collectors is reviewed to be more familiar with flat plate collectors, their details, and technology. Then, solar still coupled with a flat plate collector is extensively reviewed and discussed in detail. Four types of studies on solar still coupled with a flat plate collector were done, including energy analysis, exergy analysis, economic analysis, and productivity evaluation.
17 April 2024 in International Journal of Heat and Mass Transfer
Due to its potential for greater thermal efficiency compared to standalone power production systems, Combined Cooling, Heating and Power (CCHP) systems have drawn significant attention over the past few decades. The primary goal of this investigation is to provide insights on implementing a CCHP system in an Iranian office building. Choosing the right amount of equipment capacity is one of the most important factors in achieving this goal. Regarding to this, various scenarios and alternatives are introduced based on the gas turbine capacity. The optimal alternative is determined based on a technical and economic analysis, regarding the availability of each alternative. In the end, a study is conducted and pertinent data are provided on decreasing pollutant emissions owing to the implementation of a CCHP system in this office building. In light of Iran's present energy situation, it's important to design the prime mover's optimal capacity so that its electricity generating capacities (based on peak load) are in line with the building's electric demand. In addition, this office building's natural gas and residential electricity usage have an estimated annual impact on the surrounding neighborhood of $80,000.