Corrugating channel wall is considered to be an efficient procedure for achieving improved heat transfer. Further enhancement can be obtained through the utilization of nanofluids and porous media with high thermal conductivity. This paper presents the effect of geometrical parameters for the determination of an appropriate configuration. Furthermore, the optimization of forced convective heat transfer and fluid/nanofluid flow through a sinusoidal wavy-channel inside a porous medium is performed through the optimization of entropy generation. The fluid flow in porous media is considered to be laminar and Darcy–Brinkman–Forchheimer model has been utilized. The obtained results were compared with the corresponding numerical data in order to ensure the accuracy and reliability of the numerical procedure. As a result, increasing the Darcy number leads to the increased portion of thermal entropy generation as well as the decreased portion of frictional entropy generation in all configurations. Moreover, configuration with wavelength of 10 mm, amplitude of 0.5 mm and phase shift of 60° was selected as an optimum geometry for further investigations on the addition of nanoparticles. Additionally, increasing trend of average Nusselt number and friction factor, besides the decreasing trend of performance evaluation criteria (PEC) index, were inferred by increasing the volume fraction of the nanofluid (Al2O3 and CuO).
Porous inserts and nanofluids are among the conventional methods for the amelioration of heat transfer in industrial systems. The heat transfer rate could also be improved by utilizing porous substances with a higher thermal conductivity in these systems. This research work presents a two-dimensional (2D) numerical examination of the laminar forced convection of an --carboxy methyl cellulose (CMC) non-Newtonian hybrid nanofluid within an annular pipe in a porous medium. The porous medium was inserted within two inner or outer wall cases. For hybrid nanofluid flow modeling in porous media, a Darcy–Brinkman–Forchheimer formulation was employed. Additionally, a power-law technique was utilized as a fluid viscosity model for the considered non-Newtonian fluid. The governing equations were discretized according to the finite volume method (FVM) using the computational fluid dynamics (CFD) software package ANSYS-FLUENT. The cylinder walls’ thermal boundary conditions were exposed to a constant heat flux. For various Darcy numbers, the impacts of different volume fractions of the hybrid nanofluid (0% to 5%), the total Nusselt number, the pressure drop, and the performance number (PN) were evaluated. The outcomes indicate that the heat transfer coefficient increases considerably with a decrease in the Darcy number ( to ), as well as with an increase in the porous thickness ratio. Moreover, it was found that the nanoparticles’ increased volume fraction would ameliorate the heat transfer and, more considerably, the PN factor. Furthermore, according to the outcomes in both cases I and II for a constant porous thickness ratio and Darcy number and a high volume fraction (), the maximum total Nusselt number reached 1274.44. Moreover, applying a volume fraction of 5% with and reached the highest value of the PN index equal to 7.61, which is augmented as roughly 88% compared to the case of a zero volume fraction.
25 June 2020 in Journal of Energy Resources Technology
Traditional strategies for improving heat transmission in industrial systems include nanofluids and porous inserts. In these kinds of systems, increasing the rate of thermal transmission can also be accomplished by utilizing porous materials that have a higher thermal conductance.
Al
2
O
3 , CuO, and ZnO in engine oil (20w50) nanofluid are studied numerically in three dimensions to see how they affect forced convection in a porous media oil cooler. Within the oil cooler, the porous medium was placed. A two-phase mixture model was used in conjunction with the Darcy–Brinkman–Forchheimer equation indicating the drag forces to simulate nanofluid flow in porous media. In addition, utilizing temperature laboratory data, a more specific thermophysical feature of the fluid was identified and characterized. ANSYS-FLUENT, a commercial computational fluid dynamics (CFD) software, is used to partition the governing equations using the finite volume method. In addition, the thermal boundary parameters of the oil cooler walls were made to be temporally constant and spatially uniform. The effects of varying volume fractions (ranging from 0% to 5%), Darcy number (ranging from 10 −2 to 10 2 ), overall Nusselt number, pressure reduction, and the performance evaluation criteria (PEC) were analyzed and compared for a variety of distinct nanoparticles. The increased Darcy number (10 −2 to 10 2 ) had a significant effect on the enhanced heat transfer coefficient, according to the data. In light of the findings, it can be deduced that the high-volume percentage of the nanoparticles will improve thermal transmission and, more significantly, the PEC factor. Furthermore, the given variables were compared, leading to the creation of diagrams for different variables.