Filippo Maria Conte Capodacqua

Mr. Filippo Maria Conte Capodacqua

TU Delft, Delft, The Netherlands
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Annalisa VolpeAnnalisa Volpe
Annalisa Volpe
Filippo Maria Conte CapodacquaFilippo Maria Conte Capodacqua
Filippo Maria Conte Capodacqua
VGValeria Garzarelli
Valeria Garzarelli
EPElisabetta Primiceri
Elisabetta Primiceri
MCMaria Serena Chiriacò
Maria Serena Chiriacò
Antonio AnconaAntonio Ancona
Antonio Ancona
The possibility of fabricating micrometric pore size membranes is gaining great interest in many applications, from studying cell signaling, to filtration. Currently, many technologies are reported to fabricate such microsystems, the choice of which depends strictly on the substrate material and on the final application. Here, we demonstrate the capability with a single femtosecond laser source and experimental setup to fabricate micromembranes both on polymeric and multilayer metallic substrate, without the need for moulds, mask, and complex facilities. In particular, the flexibility of laser drilling was exploited to obtain microfilters with pore size of 8 and 18 µm in diameter, on metallic and polymeric substrate, respectively, and controlled distribution. For evaluating the possibility to use such laser-fabricated membranes into biological assay, their biocompatibility has been investigated. To this aim, as a proof of concept, we tested the two materials into viability tests. The culture of mammalian cells on these microfabricated membranes were studied showing their compatibility with cells.

17 March 2023
Verified
Conference Paper
Closed access
PDF file
Annalisa VolpeAnnalisa Volpe
Annalisa Volpe
MCMaria Serena Chiriacò
Maria Serena Chiriacò
PPPetra Paiè
Petra Paiè
Filippo Maria Conte CapodacquaFilippo Maria Conte Capodacqua
Filippo Maria Conte Capodacqua
Caterina GaudiusoCaterina Gaudiuso
Caterina Gaudiuso
Antonio AnconaAntonio Ancona
Antonio Ancona
Development of new lab-on-a-chip (LoC) devices requires an optimization phase in which it could be necessary to continuously modify the architecture and geometry. However, this is only possible if easy, controllable fabrication methods and low-cost materials are available. For this reason, rapid prototyping approaches for the fabrication of polymeric LoC are on the rise, as they allow high degrees of precision and flexibility. Here, we describe the fabrication platform of polymeric microfluidic devices, from the design (CAD) to the proof-ofconcept application as LoC for biological applications. The fabrication procedure is mainly based on fs-laser micromachining techniques. The ability of femtosecond (fs)-laser pulses to produce localized modification of the materials, thereby avoiding either debris, recast layers or unsought thermal affected zones, without restriction of the substrate materials, makes this technology particularly suitable for microfluidic device fabrication. In our work, fs-laser has been also possibly combined with other techniques, without the need for the expensive masks and facilities required by the lithographic process. The LoC devices have been realized in polymethyl methacrylate (PMMA), a low cost and biocompatible material. The fs-based smart fabrication platform has been exploited in the fabrication of disposable LoC devices for particles manipulation. In particular, a serpentine microchannel able to distinguish cancer from non-cancer cells without labeling and a fully inertial sorting 3D device have been fabricated and tested.

4 March 2022
Verified
Conference Paper
Closed access
Annalisa VolpeAnnalisa Volpe
Annalisa Volpe
Filippo Maria Conte CapodacquaFilippo Maria Conte Capodacqua
Filippo Maria Conte Capodacqua
CGCaterina Gaudiuso
Caterina Gaudiuso
AAAntonio Ancona
Antonio Ancona
SPIE Digital Library Proceedings

1 January 2022 in SSRN Electronic Journal
Verified
Preprint
Open access
PDF file
Filippo Maria Conte CapodacquaFilippo Maria Conte Capodacqua
Filippo Maria Conte Capodacqua
AVAnnalisa Volpe
Annalisa Volpe
Caterina GaudiusoCaterina Gaudiuso
Caterina Gaudiuso
AAAntonio Ancona
Antonio Ancona
Nowadays, many devices and objects, from microelectronics to microfluidics, consist of parts made from dissimilar materials, such as different polymers, metals or semiconductor joined to polymers.Techniques for joining such hybrid micro-devices, generally, are based on gluing or thermal processes, which all present some drawbacks. For example, these methods are unable to control the size and shape of the bonded area, and present risks of deterioration and contamination of the substrates.Ultrashort laser bonding is a non-contact and flexible method to precisely join similar and dissimilar materials. This technique has been demonstrated both for joining polymers and polymers to metallic substrates, but not yet for joining polymers to silicon.Here, we report on direct transmission femtosecond laser bonding of poly(methyl methacrylate) (PMMA) and silicon. The laser process was performed by focusing ultrashort laser pulses at high repetition rate at the interface between the two materials, being the PMMA upper layer transparent to the laser wavelength. A mechanical homogenous pressure was applied on the sandwiched substrates during all the laser process. The PMMA-Si bond strength was evaluated as a function of the laser processing parameters, i.e., repetition rate, scan speed, and the overlap between adjacent scan lines. Results have been evaluated based on existing heat accumulation models. Then, as a proof of concept, the fs-laser bonding of a simple hybrid PMMA-Si microfluidic device has been successfully demonstrated through dynamic leakage tests.