The utilization of calcined coal gangue (CCG) and limestone for the preparation of blended cement is an efficient approach to address the issue of coal gangue disposal. However, the compressive strength development of blended cement is slow, particularly at high substitution levels of CCG. Therefore, this study aimed to promote the hydration and mechanical properties of the calcined coal gangue–limestone blended cements by increasing the curing temperature. In this study, the samples were cured at two different temperatures, namely 20 and 40 °C. The four groups of samples contained 15 wt.%, 30 wt.%, 45 wt.% and 60 wt.% cement substitutions using CCG and limestone (2:1 mass ratio). The compressive strength, hydration and microstructure were investigated at the ages of 1 to 28 d. X-ray diffraction (XRD) and thermogravimetry (TG) were used to study the hydration behavior of samples. Mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) were used to determine the microstructure of the samples. The results indicate that an increase in curing temperature significantly promotes the compressive strength of the calcined coal gangue–limestone blended cements from 1 to 28 d. The microstructural analysis indicates that increasing the curing temperature not only promotes cement hydration but also facilitates the reaction of CCG, which precipitated more hydrates such as C-A-S-H gel, Hc and Mc. These hydrates are conducive to refining the pore structures and densifying the microstructure, which sufficiently explains the enhanced compressive strength of the calcined coal gangue–limestone blended cements.
This study focuses on the calcined coal gangue (CCG)-blended cements containing Stöber nano-SiO2 (SNS) particles. The effects of SNS particles on the workability, hydration behaviour, mechanical properties and microstructure evolution of the blended cements were comprehensively investigated at curing ages ranging from 1 to 28 d. The hydration behaviour was studied via isothermal calorimetry test, X-ray diffraction (XRD) and thermogravimetric (TG) tests. The microstructural evolution was studied using mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). The results show that the incorporation of SNS led to a significant reduction in fluidity, particularly at an SNS content of 3%. The SNS significantly increased the compressive strength of the CCG-blended cement at all curing ages, and the optimum SNS content was found to be 2%. SNS significantly accelerated not only the early cement hydration but also the pozzolanic reaction of CCG at later curing ages, resulting in a decrease in portlandite, as evidenced by the isothermal calorimetry, XRD and TG analysis. Microstructural analysis shows that the incorporation of SNS effectively refined the pore structure of the CCG-blended cement, resulting in the formation of a dense microstructure. All these beneficial effects of SNS provides advantages in the development of the compressive strength of the CCG-blended cement at all curing ages.
To investigate the effects of limestone powder and gypsum on the early hydration of ye’elimite, the hydration behavior of C4A3-LP-CaSO4·2H2O-H2O systems are researched. The hydration behavior of systems are researched by employing isothermal calorimetry, XRD technique and chemical shrinkage. The thermodynamic modelling method is employed to predict the equilibrium phase assemblages. The results show that the system with 5 wt.% LP has a comparable hydration heat evolution to limestone powder-free systems. Limestone powder can take part in the reaction to produce monocarboaluminate in the system with M-value (molar ratio of gypsum to ye’elimite) of 1, but monocarboaluminate is not found in the system with M-value of 2. The level off time of chemical shrinkage shortens with the increase of limestone powder dosage. Thermodynamic modelling results show that monocarboaluminate is no longer formed in all systems when M-value exceeds 1.27, which corresponds to the XRD results. This study can provide theoretical guidance for the rational utilization of limestone powder in calcium sulphoaluminate cement.
29 April 2026 in Journal of Thermal Analysis and Calorimetry