Landfill leachate, a complex wastewater generated from municipal solid waste (MSW) landfills, presents significant environmental challenges due to its high organic content and toxic pollutants. This study proposes a sustainable solution by employing the green synthesis of copper oxide nanoparticles (CuO NPs) using durian (Durio zibethinus) husk extract, which serves as a natural reducing and stabilizing agent. This approach transforms agricultural waste into a valuable resource for environmental remediation. The synthesis was carried out under mild conditions, avoiding harmful chemicals and reducing energy consumption. The CuO NPs were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy to examine their morphology, crystallinity, purity, and optical properties. SEM and HR-TEM analyses revealed mainly spherical nanoparticles with an average size of 35–50 nm and minimal aggregation. XRD analysis confirmed the presence of a highly crystalline monoclinic phase of CuO, while the EDX spectrum showed distinct peaks corresponding to copper (72%) and oxygen (28%) by weight, confirming the high purity of the material. Preliminary tests demonstrated the photocatalytic efficiency of the CuO NPs, achieving up to a 79% reduction in chemical oxygen demand (COD) in landfill leachate. These findings underscore the potential of green-synthesized CuO NPs for environmental applications, offering an innovative, sustainable method for wastewater treatment and supporting the advancement of solid waste management practices.
The treatment of palm oil mill effluent (POME) poses a significant challenge for Malaysia’s palm oil industry, necessitating compliance with the Department of Environment (DOE) regulations prior to discharge. This study introduces an eco-friendly synthesis method utilizing mangosteen (Garcinia mangostana L.)-leaf aqueous extract to fabricate copper oxide (CuO), zinc oxide (ZnO) nanoparticles (NPs), and their nanocomposite (CuO-ZnO NCs). The physicochemical properties of these nanomaterials were characterized using various analytical tools and their effectiveness in reducing the chemical oxygen demand (COD) of palm oil mill effluent (POME) was assessed under the illumination of two types of light sources: monochromatic blue- and polychromatic white-light emitting diodes (LEDs). CuO-ZnO NCs demonstrated superior performance, with the lowest energy bandgap (1.61 eV), and achieved a COD removal efficiency of 63.27% ± 0.010 under blue LED illumination, surpassing the DOE’s discharge limit of 100 mg/L. This study offers a cost-effective and environmentally friendly method for synthesizing heterojunction materials, which show great potential as photocatalysts in reducing POME COD to permissible levels for discharge.
Compared to conventional metal oxide nanoparticles, metal oxide nanocomposites have demonstrated significantly enhanced efficiency in various applications. In this study, we aimed to synthesize zinc oxide–copper oxide nanocomposites (ZnO-CuO NCs) using a green synthesis approach. The synthesis involved mixing 4 g of Zn(NO3)2·6H2O with different concentrations of mangosteen (G. mangostana) leaf extract (0.02, 0.03, 0.04 and 0.05 g/mL) and 2 or 4 g of Cu(NO3)2·3H2O, followed by calcination at temperatures of 300, 400 and 500 °C. The synthesized ZnO-CuO NCs were characterized using various techniques, including a UV-Visible spectrometer (UV-Vis), photoluminescence (PL) spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD) analysis and Field Emission Scanning Electron Microscope (FE-SEM) with an Energy Dispersive X-ray (EDX) analyzer. Based on the results of this study, the optical, structural and morphological properties of ZnO-CuO NCs were found to be influenced by the concentration of the mangosteen leaf extract, the calcination temperature and the amount of Cu(NO3)2·3H2O used. Among the tested conditions, ZnO-CuO NCs derived from 0.05 g/mL of mangosteen leaf extract, 4 g of Zn(NO3)2·6H2O and 2 g of Cu(NO3)2·3H2O, calcinated at 500 °C exhibited the following characteristics: the lowest energy bandgap (2.57 eV), well-defined Zn-O and Cu-O bands, the smallest particle size of 39.10 nm with highest surface area-to-volume ratio and crystalline size of 18.17 nm. In conclusion, we successfully synthesized ZnO-CuO NCs using a green synthesis approach with mangosteen leaf extract. The properties of the nanocomposites were significantly influenced by the concentration of the plant extract, the calcination temperature and the amount of precursor used. These findings provide valuable insights for researchers seeking innovative methods for the production and utilization of nanocomposite materials.