Actuation of space robots poses significant challenges in ensuring operation in vacuum. Conventional electromagnetic technologies face inherent limitations due to heat dissipation and difficulties in lubrication, whereas recent electrostatic alternatives, such as dielectric elastomer actuators struggle to reach their potential due to low reliability and lack of space compatible materials. Here, we introduce a class of electrostatic actuators that leverage the dielectric properties of the vacuum environment and turn it from a limiting factor into a key enabler. These devices rely on dielectric/conductive multilayer thin-film polymeric structures that enclose vacuum gaps, which unimpededly change in volume upon electrical activation, enabling zipping-like motions and generating actuation. Specifically, we demonstrate 0.7 g actuators delivering millimeter-range strokes, forces over 4 N, > 100 Hz bandwidth, and peak power-to-mass ratios of 1.4 kW kg⁻¹. Made from standard space polymers, they enable stackable, power-dense direct-drive actuation in vacuum environments, offering a promising solution for future space applications.
Electroadhesion is a suitable technology for developing grippers for applications where fragile, compliant or variable shape objects need to be grabbed and where a retention action is typically preferred to a compression force. This article presents a self-sensing technique for electroadhesive devices (EAD) based on the capacitance measure. Specifically, we demonstrate that measuring the variation of the capacitance between electrodes of an EAD during the adhesion can provide useful information to automatically detect the successful grip of an object and the possible loss of adhesion during manipulation. To this aim, a dedicated electronic circuit is developed that is able to measure capacitance variations while the high voltage required for the adhesion is activated. A test bench characterization is presented to evaluate the self-sensing of capacitance during different states: (1) the EAD is far away from the object to be grasped; (2) the EAD is in contact with the object, but the voltage is not active (i.e., no adhesion); and (3) the EAD is activated and attached to the object. Correlation between the applied voltage, object material and shape and capacitance is made. The self-sensing EAD is then demonstrated in a closed-loop robotic application that employs a robot manipulator arm to pick and place objects of different kinds.
To pursue a variable-capacitance working principle, transducers based on soft electroactive polymers (EAPs) need deformable electrodes that match the compliance and stretchability of the EAP polymeric substrates. A variety of manufacturing procedures are available to create conductive materials that can achieve this, including solutions that can provide remarkably low resistivity. However, the simplest and most feasible options often involve the use of particle-filled (e.g. carbon-filled) polymer composites, which, while easy to produce, tend to exhibit relatively high resistivity. This high level of resistivity, combined with the inherent capacitance of EAP transducers, introduces dynamic effects in the devices electrical activation, which may affect performance. This paper investigates the impact of electrode resistivity on the electrical dynamics of EAP devices, combining continuum models and experimental validations. We use a continuum generalisation of known resistive-capacitive (RC) transmission line models to accurately predict voltage gradients on the surfaces of electrostatic transducers subject to rapidly varying voltages. We then present an experimental validation by measuring the spatial voltage distributions over carbon-based polymeric electrodes of dielectric elastomer (DE) transducers, and find a good agreement with our model predictions. We use our validated model to provide general estimates of the typical charging time and limit working frequency ranges of DE devices as a function of their dimensional scale and electrode sheet resistance. Our model provides useful indications for designing compliant electrodes in EAP transducers given target performance, or to understand the working limits of devices with given geometry and dielectric-electrode properties.