Up to date, Dielectric Elastomer Actuators (DEA) have been mostly based on either silicone or acrylic elastomers, whereas the potential of DEAs based on inexpensive, wide-spread natural and synthetic rubbers has been scarcely investigated. In this paper, a DEA based on a styrene-based rubber is demonstrated for the first time. Using a Lozenge-Shaped DEA (LS-DEA) layout and following a design procedure previously proposed by the authors, we develop prototypes featuring nearly-zero mechanical stiffness, in spite of the large elastic modulus of styrenic rubber. Stiffness compensation is achieved by simply taking advantage of a biaxial pre-stretching of the rubber DE membrane, with no need for additional stiffness cancellation mechanical elements. In the paper, we present a characterization of the styrene rubber-based LS-DEA in different loading conditions (namely, isopotential, isometric, and isotonic), and we prove that actuation strokes of at least 18% the actuator side length can be achieved, thanks to the proposed stiffness-compensated design.
Human–robot collaboration stands as one of the research frontiers in industrial applications due to the possibility for human operators to be supported by robots in carrying out their tasks in a shared workspace. However, advances in this field can be slowed down by the lack of standards regarding the safety and ergonomics of such applications. This article aims at reducing this gap by presenting an adaptation of the standard ISO 11228-3 for the ergonomic evaluation of hand-guiding applications through the OCRA index. This innovative methodology is innovatively applied to a drilling application in which a human operator hand-guides a collaborative robotic system consisting of a Franka Emika Panda robot, a force/torque sensor and an IMU suit to track the motion of the operator’s body. The SaRAH app, a MATLAB 2020a-based software tool developed on purpose, implements the ergonomic assessment procedure, allowing the proper redesign of the working shift (offline mode) or providing the worker suggestions to improve his/her behavior (online mode) so as to reduce the ergonomic risk.
Dielectric elastomer (DE) membrane transducers allow to achieve large strain, low energy consumption, low-noise, and highly compact mechatronic devices. To optimize the design of membrane DEs via numerically efficient software tools, as well as to develop accurate control and self-sensing algorithms, a lumped parameter model is required. In the case of rectangular DE strips clamped at both ends and subject to a uniaxial in-plane load, the resulting necking and inhomogeneous deformation turn out to be challenging to be described via standard lumped models, thus making it necessary to rely on numerically involved finite element (FE) tools. In this paper, we present a novel modeling framework that permits to accurately describe clamped DE membranes with generic aspect ratio in a control-oriented fashion. The model is grounded on an anisotropic free-energy function, which maps the inhomogeneities due to clamping within the constitutive membrane behavior. In this way, a lumped description of the DE can be obtained in terms of average stress and stretch quantities. After presenting the model, an extensive validation is performed by means of comparative studies with FE simulations as well as experimental results. It is observed how the proposed model permits to accurately describe the electro-mechanical response of clamped DE membranes for a wide range of aspect ratios, including nearly-uniaxial, nearly-pure shear, as well as intermediate configurations.
Electroadhesion is a suitable technology for developing grippers for applications where fragile, compliant or variable shape objects need to be grabbed and where a retention action is typically preferred to a compression force. This article presents a self-sensing technique for electroadhesive devices (EAD) based on the capacitance measure. Specifically, we demonstrate that measuring the variation of the capacitance between electrodes of an EAD during the adhesion can provide useful information to automatically detect the successful grip of an object and the possible loss of adhesion during manipulation. To this aim, a dedicated electronic circuit is developed that is able to measure capacitance variations while the high voltage required for the adhesion is activated. A test bench characterization is presented to evaluate the self-sensing of capacitance during different states: (1) the EAD is far away from the object to be grasped; (2) the EAD is in contact with the object, but the voltage is not active (i.e., no adhesion); and (3) the EAD is activated and attached to the object. Correlation between the applied voltage, object material and shape and capacitance is made. The self-sensing EAD is then demonstrated in a closed-loop robotic application that employs a robot manipulator arm to pick and place objects of different kinds.