Current waste management is not able to handle the disposal rates due to the growing global population and economic expansion are increasing in Malaysia. The waste is expected to rise to 41,035 tonnes per day by the year 2026. The responsibility for the separating waste is critically lacking. The solid waste composition of Malaysia is made up of 45% of food waste, 24% of plastic, 7% of paper, 6% of iron and glass. This garbage condition is wet and mixed. The moisture content of MSW is about 55.01%. Current practices for municipal solid waste (MSW) disposal such as landfill and incineration poses a serious problem on the environment and health. Leachate generated from landfill is polluted liquid and consisted high nitrogen compounds, salts, heavy metal. Incineration generates dangerous gases such as carbon dioxide (CO2), sulfur dioxide (SO2), and oxides of nitrogen (NO and NO2, together known as NOx). Malaysia has more than 900 rivers have been polluting due to the improper solid waste management. The implementation of the thermal treatment plant (incinerator) in Malaysia was failed due the high cost of the operation. The high moisture content of the waste and a poor technical expertise in maintaining the incinerators caused the failure of the incineration operation. Thus, moisture reduction is needed prior before goes for incineration. Therefore, the current waste management system adopted by incinerator to be made improvement based on Torrefaction for effective energy recovery system. The moisture contents must be decrease to 75% before subjecting to pyrolysis or incineration. The high heating value (HHV) of the MSW is a main impact on the cost of the operation. The implementation of the pyrolysis system can be reduced the total amount of MSW before buried in landfill. The MSW pyrolysis is one of the ideas that has become increasingly in recent years. It can prevent the formation acidic substances and reduce the amount of garbage before sending over to the landfill and save the transportation fuel.
Flood disasters pose significant threats to communities around the world. In Malaysia, floods are recurrent and severe natural disasters due to its geographical location. Focusing on the response phase of flood disaster management, this study identifies critical issues including the limitations of manual observation in traditional methods and the lack of structured flood image databases. Hence, this research explores the use of generative artificial intelligence (gen-AI) to create synthetic images as an alternative source in flood disaster detection and response. By adopting a systematic approach with the You Only Look Once (YOLO) algorithm, the model is trained on gen-AI produced synthetic images and then tested using real drone-captured images from past flood events. The model demonstrates promising preliminary results with the highest performing model achieving a mean Average Precision (mAP50) of 96.7%, mAP @[0.5,0.95] of 78.7% and a F1-score of 90.8%. These findings highlight the potential of gen-AI in supporting flood disaster response efforts in Malaysia, aiming to integrate the mix of synthetic images during non-flooding periods and actual drone images during flood scenarios into a comprehensive framework, FloodIntel, for future research.
Question classification based on Bloom’s Taxonomy (BT) has been widely accepted and used as a guideline in designing examination questions in many institutions of higher learning. The misclassification of questions may happen when the classification task is conducted manually due to a discrepancy in the understanding of BT by academics. Hence, several automated examination question classification systems have been proposed by researchers to perform question classification accurately. Most of this research has focused on specific subject areas only or single-sentence type questions. There has been a lack of research on question classification for multi-sentence type and multi-subject questions. This paper proposes a question classification system (QCS) to perform the examination of question classification using a semantic and synthetic approach. The questions were taken from various subjects of an engineering diploma course, and the questions were either single- or multiple-sentence types. The QCS was developed using a natural language toolkit (NLTK), Stanford POS tagger (SPOS), Stanford parser’s universal dependencies (UD), and WordNet similarity approaches. The QCS used the NLTK to process the questions into sentences and then word tokens, such as SPOS, to tag the word tokens and UD to identify the important word tokens, which were the verbs of the examination questions. The identified verbs were then compared with the BT’s verbs list in terms of word sense using the WordNet similarity approach before finally classifying the questions according to BT. The developed QCS achieved an overall 83% accuracy in the classification of a set of 200 examination questions, according to BT.
Recent research has shown an increasing interest in wireless power transfer (WPT) technology for drone batteries. The inconvenience of wired charging, especially for drones, is a huge obstacle. In this research project, a WPT platform was proposed by applying four transmitting coils and a single receiving coil. To meet the industrial standards required for transmitter Tx and receiver Rx, a calculation of the parameters was implemented. An H-bridge MOSFET was used as a DC–AC inverter, a bridge diode was used as an AC–DC rectifier, and a Pi low pass filter was added to the receiver circuit design to filter the high-frequency noise. Experimental investigations were conducted to study the maximum power and power efficiency of the coil’s alignment. The focus of this article was to design and fabricate workable multiple-transmitter coils and a single-receiver coil for a wireless power transfer system, in order to charge a 3S LiPo drone’s battery. It not only covers an overview of wireless power transfer but also includes the method for charging a 3S LiPo drone’s battery, a misalignment study on the X and Y axes of the wireless charging system, and a stable charging of the battery that does not exceed the maximum current of 1.26 A for healthy charging. An efficiency of 58.29% was achieved at a power of 14.924 W and the minimum value was found to be 0.008 W. The efficiency of the typical coil design and the proposed coil design were 55.04% and 12.06%, respectively. The charging current obtained was 1.27 A, which gives an estimated charging time of 3.31 h based on the calculation. The actual charging time of the 3s 4200 mAh 11.1 V LiPo battery was 2 h.
Malaysia current waste management systems are not able to solve the disposal rates. The reduction of waste through 3Rs programme (reduce, reuse, and recycle) is in precontemplation stage. The municipal solid waste (MSW) condition is mixed and wet. The landfill and Thermal Treatment Plant (incineration) are the current practices for the MSW disposal. Landfill created leachate while incineration released unhealthy gases. Incineration failed due to the improper management and high cost of the operation. Torrefaction is needed before it goes to the incineration to improve the high heating value (HHV). The MSW pyrolysis and gasification are able to convert into valuable products (bio-oil, biochar, combustible gases). Combustible gases can be used to feedback into the incinerator. The heat of the incinerator can be performed waste to energy (WTE), which is able to convert into electricity as a Feed-in-Tariff (FiT).