Estimation of forest above-ground biomass (AGB) using multi-source remote sensing data is an important method to improve the accuracy of the estimate. However, selecting remote sensing factors that can effectively improve the accuracy of forest AGB estimation from a large amount of data is a challenge when the sample size is small. In this regard, the Least Absolute Shrinkage and Selection Operator (Lasso) has advantages for extensive redundant variables but still has some drawbacks. To address this, the study introduces two Least Absolute Shrinkage and Selection Operator Lasso-based variable selection methods: Least Absolute Shrinkage and Selection Operator Genetic Algorithm (Lasso-GA) and Variance Inflation Factor Least Absolute Shrinkage and Selection Operator (VIF-Lasso). Sentinel 2, Sentinel 1, Landsat 8 OLI, ALOS-2 PALSAR-2, Light Detection and Ranging, and Digital Elevation Model (DEM) data were used in this study. In order to explore the variable selection capabilities of Lasso-GA and VIF-Lasso for remote sensing estimation of forest AGB. It compares Lasso-GA and VIF-Lasso with Boruta, Random Forest Importance Selection, Pearson Correlation, and Lasso for selecting remote sensing factors. Additionally, it employs eight machine learning models—Random Forest (RF), Extreme Gradient Boosting (XGBoost), Support Vector Machine (SVM), Bayesian Regression Neural Network (BRNN), Elastic Net (EN), K-Nearest Neighbors (KNN), Extremely Randomized Trees (ETR), and Stochastic Gradient Boosting (SGBoost)—to estimate forest AGB in Wuyi Village, Zhenyuan County. The results showed that the optimized Lasso variable selection could improve the accuracy of forest biomass estimation. The VIF-Lasso method results in a BRNN model with an R² of 0.75 and an RMSE of 16.48 Mg/ha. The Lasso-GA method results in an ETR model with an R² of 0.73 and an RMSE of 16.70 Mg/ha. Compared to the optimal SGBoost model with the Lasso variable selection method (R² of 0.69, RMSE of 18.63 Mg/ha), the VIF-Lasso method improves R² by 0.06 and reduces RMSE by 2.15 Mg/ha, while the Lasso-GA method improves R² by 0.04 and reduces RMSE by 1.93 Mg/ha. From another perspective, they also demonstrated that the RX sample count and sensitivity provided by LiDAR, as well as the Horizontal Transmit, Vertical Receive provided by Microwave Radar, along with the feature variables (Mean, Contrast, and Correlation) calculated from the Green, Red, and NIR bands of optical remote sensing in 7 × 7 and 5 × 5 windows, play an important role in forest AGB estimation. Therefore, the optimized Lasso variable selection method shows strong potential for forest AGB estimation using multi-source remote sensing data.

Improving the precision of aboveground biomass (AGB) estimation in lowland tropical forests is crucial to enhancing our understanding of carbon dynamics and formulating climate change mitigation strategies. This study proposes an AGB estimation method for lowland tropical forests in Xishuangbanna, which include various vegetation types, such as Pinus kesiya var. langbianensis, oak, Hevea brasiliensis, and other broadleaf trees. In this study, 2016 forest management inventory data are integrated with remote sensing variables from Landsat 8 OLI (L8) and Sentinel 2A (S2) imagery to estimate forest AGB. The forest age and aspect were utilized as stratified variables to construct the random forest (RF) models, which may improve the AGB estimation accuracy. The key findings are as follows: (1) through variable screening, elevation was identified as the main factor correlated with the AGB, with texture measures derived from a pixel window size of 7 × 7 perform best for AGB sensitivity, followed by 5 × 5, with 3 × 3 being the least effective. (2) A comparative analysis of imagery groups for the AGB estimation revealed that combining L8 and S2 imagery achieved superior performance over S2 imagery alone, which, in turn, surpassed the accuracy of L8 imagery. (3) Stratified models, which integrated aspect and age variables, consistently outperformed the unstratified models, offering a more refined fit for lowland tropical forest AGB estimation. (4) Among the analyzed forest types, the AGB of P. kesiya var. langbianensis forests was estimated with the highest accuracy, followed by H. brasiliensis, oak, and other broadleaf forests within the RF models. These findings highlight the importance of selecting appropriate variables and sensor combinations in addition to the potential of stratified modeling approaches to improve the precision of forest biomass estimation. Overall, incorporating stratification theory and multi-source data can enhance the AGB estimation accuracy in lowland tropical forests, thus offering crucial insights for refining forest management strategies.

Integrating multi-source remote sensing can improve the accuracy of forest aboveground biomass (AGB) estimation. However, the accuracy and stability of the forest AGB estimation results are affected by multiple remote sensing feature variables as well as parameter tuning of machine learning algorithms. To this end, this study employed six types of remote sensing data—Landsat 8 OLI, Sentinel-2A, GEDI, ICESat-2, ALOS-2, and SAOCOM. A dual-variable selection strategy based on SHapley Additive exPlanations (SHAP) was developed, and a genetic algorithm (GA) was used to optimize the parameters of five machine learning models—elastic net (EN), least absolute shrinkage and selection operator (Lasso), support vector regression (SVR), Random Forest (RF), and Categorical Boosting (CatBoost)—to estimate the AGB of Pinus kesiya var. langbianensis forest in Wuyi Village, Zhenyuan County. The dual-variable selection strategy integrates SHAP with the Pearson correlation coefficient (PC), RF, EN, and Lasso to enhance feature screening robustness and interpretability. The results of the study showed that Lasso-SHAP dual-variate screening was more stable than SHAP univariate screening. In particular, the Lasso-SHAP strategy improved the average R² from 0.59 (using SHAP alone) to above 0.70, achieving an enhancement of 11%. Among GA-optimized parametric machine learning models, the linear GA-Lasso achieved the best performance, with an R² of 0.91 and an RMSE of 12.94 Mg/ha, followed by the GA-EN model (R² = 0.89, RMSE = 14.46 Mg/ha). For nonlinear models, GA-SVR performed the best (R² = 0.74, RMSE = 22.07 Mg/ha), surpassing the GA-CatBoost model (R² = 0.64, RMSE = 25.88 Mg/ha). In summary, the Lasso-SHAP dual-variable selection strategy effectively improves the estimation accuracy of AGB for Pinus kesiya var. langbianensis forests, while GA-optimized machine learning models demonstrate excellent performance, providing strong support for regional-scale forest resource monitoring and carbon stock assessment.

Global change and the intensification of human activities have led to a sharp decline in global biodiversity and other ecological issues. Over the past 30 years, ecologists have increasingly focused on the question of whether and how the ongoing loss of biodiversity affects ecosystem functioning. However, historically, researchers have predominantly concentrated on individual ecosystem functions, neglecting the capacity of ecosystems to provide multiple ecosystem functions simultaneously, known as ecosystem multifunctionality (EMF). As a result, the connection between biodiversity and ecosystem multifunctionality (BEMF) has become the central theme in BEF relationship research. In recent years, the research on the BEMF relationship has developed rapidly, and new progress has been made in different ecosystems, the driving mechanism of the BEMF relationship, and the proposal and application of new quantitative methods. However, there are still shortcomings, such as the lack of uniform standards for the selection of functional indicators in EMF research, insufficient attention to belowground microbial diversity, and less research on biological interactions in addition to biodiversity. In the future, we need to enhance standard research on the selection of functional indicators, thoroughly assess the combined effects of aboveground and belowground biodiversity along with abiotic factors on EMF, and bolster the research and application of ecosystem multiserviceability (EMS) methods.

The mapping of tropical rainforest forest structure parameters plays an important role in biodiversity and carbon stock estimation. The current mechanism models based on PolInSAR for forest height inversion (e.g., the RVoG model) are physical process models, and realistic conditions for model parameterization are often difficult to establish for practical applications, resulting in large forest height estimation errors. As an alternative, machine learning approaches offer the benefit of model simplicity, but these tools provide limited capabilities for interpretation and generalization. To explore the forest height estimation method combining the mechanism model and the empirical model, we utilized UAVSAR multi-baseline PolInSAR L-band data from the AfriSAR project and propose a solution of a mechanism model combined with machine learning. In this paper, two mechanism models were used as controls, the RVoG three-phase method and the RVoG phase-coherence amplitude method. The vertical structure parameters of the forest obtained from the mechanism model were used as the independent variables of the machine learning model. Random forest (RF) and partial least squares (PLS) regression models were used to invert the forest canopy height. Results show that the inversion accuracy of the machine learning method, combined with the mechanism model, is significantly better than that of the single-mechanism model method. The most influential independent variables were penetration depth, volume coherence phase center height, coherence separation, and baseline selection. With the precondition that the cumulative contribution of the independent variables was greater than 90%, the number of independent variables in the two study areas was reduced from 19 to 4, and the accuracy of the RF-RVoG-DEP model was higher than that of the PLS-RVoG-DEP model. For the Lope test area, the R² of the RVoG phase coherence amplitude method is 0.723, the RMSE is 8.583 m, and the model bias is −2.431 m; the R² of the RVoG three-stage method is 0.775, the RMSE is 7.748, and the bias is 1.120 m, the R² of the PLS-RVoG-DEP model is 0.850, the RMSE is 6.320 m, and the bias is 0.002 m; and the R² of the RF-RVoG-DEP model is 0.900, the RMSE is 5.154 m, and the bias is −0.061 m. The results for the Pongara test area are consistent with the pattern for the Lope test area. The combined “fusion model” offers a substantial improvement in forest height estimation from the traditional mechanism modeling method.