This study proposes a deep-learning-based model to generate synthetic compressional wave velocity (Vp) from well-logging data with application to the Ulleung Basin Gas Hydrate (UBGH) in the East Sea, Republic of Korea. Because a bottom-simulating reflector (BSR) is a key indicator to define the presence of gas hydrate, this study generates the Vp for identifying the BSR by detecting the morphology of the hydrate in terms of the change in acoustic velocity. Conventional easy-to-acquire logging parameters, such as gamma-ray, neutron porosity, bulk density, and photoelectric absorption, were selected as model inputs based on a sensitivity analysis. Long short-term memory (LSTM) and an artificial neural network (ANN) were used to design an efficient learning-based predictive model with sensitivity analysis for hyperparameters. The LSTM model outperforms the ANN model by preserving the geological sequence of the well-logging data. Ten-fold cross-validation was conducted to verify the consistency of the LSTM model and yielded satisfactory results, with an average coefficient of determination greater than 0.8. These numerical results imply that generating synthetic well-logging via deep learning can accurately estimate missing well-logging data, contributing to the reservoir characterization of gas-hydrate-bearing sediments.

In geoenergy science and engineering, well placement optimization is the process of determining optimal well locations and configurations to maximize economic value while considering geological, engineering, economic, and environmental constraints. This complex multi-million-dollar problem involves optimizing multiple parameters using computationally intensive reservoir simulations, often employing advanced algorithms such as optimization algorithms and machine/deep learning techniques to find near-optimal solutions efficiently while accounting for uncertainties and risks. This study proposes a hybrid workflow for determining the locations of production wells during primary oil recovery using a multi-modal convolutional neural network (M-CNN) integrated with an evolutionary optimization algorithm. The particle swarm optimization algorithm provides the M-CNN with full-physics reservoir simulation results as learning data correlating an arbitrary well location and its cumulative oil production. The M-CNN learns the correlation between near-wellbore spatial properties (e.g., porosity, permeability, pressure, and saturation) and cumulative oil production as inputs and output, respectively. The learned M-CNN predicts oil productivity at every candidate well location and selects qualified well placement scenarios. The prediction performance of the M-CNN for hydrocarbon-prolific regions is improved by adding qualified scenarios to the learning data and re-training the M-CNN. This iterative learning scheme enhances the suitability of the proxy for solving the problem of maximizing oil productivity. The validity of the proxy is tested with a benchmark model, UNISIM-I-D, in which four oil production wells are sequentially drilled. The M-CNN approach demonstrates remarkable consistency and alignment with full-physics reservoir simulation results. It achieves prediction accuracy within a 3% relative error margin, while significantly reducing computational costs to just 11.18% of those associated with full-physics reservoir simulations. Moreover, the M-CNN-optimized well placement strategy yields a substantial 47.40% improvement in field cumulative oil production compared to the original configuration. These findings underscore the M-CNN’s effectiveness in sequential well placement optimization, striking an optimal balance between predictive accuracy and computational efficiency. The method’s ability to dramatically reduce processing time while maintaining high accuracy makes it a valuable tool for enhancing oil field productivity and streamlining reservoir management decisions.