Many clinical surveys have evaluated the use of ultrasound in physiotherapy treatments, the question of its effectiveness still being under discussion possibly because of the randomized energy density applied, which depends on the acoustic pressure beam of the transducers. In this work, a phononic crystal made of holes in solid materials is the basis for the design of a transducer with a piston-like vibration pattern where the radial modes are stopped, thus favoring the thickness vibration and resulting in a better mechanical vibration amplitude and acoustic efficiency. Finite element simulations have been made of the standard transducer and the proposed design; then demonstrator devices have been manufactured and tested so experimental results could be compared to the calculated ones. The transducers with this phononic structure show an efficient piston-like emission. The electrical impedance, the emitting surface vibration pattern and the acoustic diffraction field have been calculated and experimentally measured.
It was recently proposed that the lateral resonances around the working resonance band of ultrasonic piezoelectric sandwich transducers can be stopped by a periodic array of circular holes drilled along the main propagation direction (a phononic crystal). In this work, the performance of different transducer designs made with this procedure is tested using laser vibrometry, electric impedance tests and finite element models (FEM). It is shown that in terms of mechanical vibration amplitude and acoustic efficiency, the best design for physiotherapy applications is when both, the piezoceramic and an aluminum capsule are phononic structures. The procedure described here can be applied to the design of power ultrasonic devices, physiotherapy transducers and other external medical power ultrasound applications where piston-like vibration in a narrow band is required.
1 May 2013 in Journal of Physics D: Applied Physics