ABM Harun-ur Harun-ur Rashid

Dr. ABM Harun-ur Harun-ur Rashid

orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 September 2024 in Heliyon
Verified
Journal Article
Open access
USUtsab Saha
Utsab Saha
AJAtik Jawad
Atik Jawad
SSShakib Shahria
Shakib Shahria
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
This article proposes a proximal policy optimization (PPO)-based reinforcement learning (RL) approach for DC-DC boost converter control that is compared with traditional control methods. The performance of the PPO algorithm is evaluated using MATLAB Simulink co-simulation, and the results demonstrate that the most efficient approach for achieving short settling time and stability is to combine the PPO algorithm with a reinforcement learning-based control method. The simulation results show that the control method based on RL with the PPO algorithm provides step response characteristics that outperform traditional control approaches, thereby enhancing DC-DC boost converter control. This research also highlights the inherent capability of the reinforcement learning method to enhance the performance of boost converter control.

1 April 2004 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
SWShinji Watanabe
Shinji Watanabe
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
TKTakamaro Kikkawa
Takamaro Kikkawa
Characterization of small integrated dipole antennas on high-resistivity Si substrates for use in on-chip wireless interconnection was performed and results were compared with those obtained by 3-dimensional (3D) finite-element simulation. The integrated antennas on standard P-type Si substrates with resistivities of 10 Ω·cm, 79.6 Ω·cm, 132 Ω·cm and 2.29 kΩ·cm, and one high-energy proton-implanted Si substrate were measured. When antenna length was 3.0 mm and antenna distance was 3.0 cm on a 10-Ω·cm-resistivity Si substrate, the antenna transmission gain was -43 dB. The antenna transmission gain was improved to -24 dB on the 2.29 kΩ·cm Si substrate. By using high-resistivity Si substrates, signal transmission via integrated antennas becomes possible.

1 June 2021 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
FFFouzia Ferdous
Fouzia Ferdous
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
Light emitting diodes (LEDs) are current driven devices. So, it is essential to maintain the stability of LED voltage and current. Variation of temperature may cause of instabilities and bifurcations in the LED driver. Driving LEDs from an offline power source faces design challenges like it have to maintain low harmonics in input current, to achieve high power factor, high efficiency and to maintain constant LED current and to ensure long lifetime. This paper proposes the technique of harmonics reduction by using parametric optimization of Single ended primary inductor converter (SEPIC) based LED driver. Without optimization of SEPIC parameters input energy will not be properly transferred to the load and this un-transferred energy will be transmitted to the source. Consequently, the quality of input current will be hampered i.e. harmonics will contaminate the input current. Focussing this, the paper has presented the design of a non-isolated integrated-stage single-switch constant current LED driver operating in discontinuous conduction mode (DCM) in SEPIC incorporating the design of control circuit with soft start mechanism. This LED driver has achieved a good efficiency (90.6%) and high-power factor (0.98) with reduced harmonics (3.35%). System stability has been determined and simulation studies are performed to confirm the validity of the LED driver circuit. A laboratory prototype is built.

6 November 2015 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ASAtanu K. Saha
Atanu K. Saha
GSGobinda Saha
Gobinda Saha
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
1-D quantum-well (QW) formation and energy state confinement in armchair graphene nanoribbon (A-GNR) heterostructures have been studied. A photodetector device structure based on A-GNR-QWs has been proposed to incorporate both interband and intersubband optical transition using a back-gate potential. Photocurrent, dark current, and quantum efficiency of different A-GNR-QW photodetector structures are studied using self-consistent simulation between nonequilibrium Green's function formalism including electron-photon interaction and Poisson's equation. Optical detection from short-wavelength infrared to ultraviolet range has been observed having a tunable feature, which makes our device a promising candidate for future optoelectronics.

1 February 2019
Verified
Conference Paper
Closed access
FZFatima Tuz Zohora
Fatima Tuz Zohora
SDSutapa Debnath
Sutapa Debnath
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
Memristor is a nanoscale device which consumes low power and shows good compatibility with CMOS circuits. It has applications in memory circuits, logic circuits as well as in neuromorphic systems to imitate biological synapses. The use of this device to implement neuron models can improve the scalability of neuromorphic circuits. In this paper a Leaky Integrate and Fire model of neuron is presented by a memristor-CMOS hybrid circuit which requires 16 MOSFETs, 1 memristor and 1 capacitor. The model has been applied in a simple configuration of one neuron driving another. Additionally, it has been used in an associative learning circuit to exhibit functionality. Such successful incorporation of the proposed design in learning networks founds the ground of further expansion and implementation of larger networks using neuron circuits.

2 March 2023 in International Transactions on Electrical Energy Systems
Verified
Journal Article
Open access
PDF file
TSTanvir Shahed
Tanvir Shahed
ARABM Harun-ur Harun-ur Rashid
ABM Harun-ur Harun-ur Rashid
This article proposes an improved topology for an isolated bidirectional resonant DC-DC converter for electric vehicle (EV) onboard chargers. As opposed to the conventional capacitor-inductor-inductor-inductor-capacitor (CLLLC) resonant converter, the proposed converters resonant circuit is composed of a capacitor-inductor-inductor-inductor (CLLL) structure, whose inductances, except the capacitor, can be fully integrated with the leakage and mutual inductances of the high-frequency transformer (HF). Therefore, this offers a smaller size, lower costs, minimal power loss, and eventually higher efficiency. Again, the proposed converter design is based on wide bandgap (WBG) transistor switches that operate at MHz-level switching frequency to achieve high power density, high efficiency, and high compactness. A discrete-time proportional integral derivative (PID) controller has been designed using the phase-shifted pulse width modulation (PSPWM) technique to assure closed-loop control of the proposed CLLL converter. The PID controller parameters have been optimized using both the genetic algorithm (GA) and particle swarm optimization (PSO) algorithm and a comparative analysis has been presented between the two algorithms. To achieve fast switching with very little switching loss, the converter is simulated with several wide bandgap (WBG) switching devices. A performance comparison with conventional Si-based switching devices is also provided. A precise power loss model of the semiconductor switches has been devised from the manufacturers datasheet to achieve a perfect thermal design for the converter. A 5kW CLLL converter with an input range of 400460V direct current (DC) and an output range of 530610V DC, and a switching frequency of 1MHz has been designed and investigated under various loading scenarios. Gallium nitride (GaN) switching device-based designs achieved the highest levels of efficiency among the switching devices. The efficiency of this device is 97.40 percent in charging mode and 96.67 percent in discharging mode.