This study evaluates the influence of incorporating two different types of recycled aggregates (RA) from construction and demolition waste (CDW), brick ceramic aggregate (RA1) and crushed concrete aggregate (RA2), from the city of Bogotá, on the performance of pervious concrete under compression and flexural strength. The substitution of RA in the production of pervious concrete is outlined, taking into account five substitution levels. For the pervious concrete mixes, aggregates of sizes retained in a sieve of 1/2” and 3/8” were used. The pervious concrete mixes were submitted, 28 days later, to density tests, void content, compression and flexural strength and permeability. Such pervious concrete with RA reaches compression and flexural strength of up to 5,79 MPa and 2,14 MPa, respectively, which are within the allowed range by the ACI, reaching a permeability of 24,79 mm/s, value that is superior to the common characteristics of pervious concrete

Several recent studies have attempted to formulate printable cementitious materials to meet the printing requirements, but these materials are designed to work with specific printing equipment and printing configurations. This paper aims to systematically develop and perform characterization of a commercially available ultra-high-performance concrete-class material (UHPC) modified to be printable. Four percentages of superplasticizer were used (100%, 94%, 88%, 82%) to adjust the UHPC mixture for 3D-printing requirements. A superplasticizer amount of 88% was considered adequate to meet the requirements. Several fresh and hardened properties of UHPC were measured experimentally: shape-retention ability and green strength were investigated in fresh state, and compressive and flexural strength were evaluated in three loading directions to evaluate the anisotropic effects. Furthermore, the strength of the interlayer bond was investigated. The UHPC developed in this study met the criteria for extrudability, buildability, and shape retention to ensure printability. In comparison with mold-cast UHPC, printed UHPC exhibited superior flexural performance (15–18%), but reduced compressive strength (32–56%). Finally, the results demonstrated that a commercially available UHPC-class material can be used for 3DCP, which possesses all necessary properties, both fresh and hardened.

This study investigates the structural behavior of bahareque earth walls, a traditional construction system commonly used in rural areas of northern South America. Bahareque (wattle and daub) walls, consisting of guadua (a bamboo-like material) or wooden frames filled with soil mixes, have demonstrated considerable resilience in seismic zones due to their lightweight and flexible nature. Despite their widespread use in these communities, limited scientific data exist on their seismic performance under in-plane pseudo-static horizontal loading. This research addresses this gap by experimentally evaluating the seismic behavior of five wall models with different combinations of guadua, wood, and earth filling materials. The methodology included four main phases, namely field visits to document traditional construction techniques, material characterization, prototype testing under pseudo-static loads, and an analysis of mechanical behavior. Key material properties, including compressive strength and Young’s modulus, were determined, alongside the mechanical and physical properties of the infill material, which incorporated natural fibers. Pseudo-static tests were conducted on five wall prototypes, featuring various configurations of guadua and wood frameworks, both with and without soil infill. The walls were subjected to horizontal in-plane loads to assess their deformation capacity, energy dissipation, and failure mechanisms. The results indicated that walls with soil mixture infill—specifically the GSHS (guadua frame with horizontal guadua strips and soil mixture infill) and TSHS (wood frame with horizontal guadua strips and soil mixture infill) configurations—demonstrated the best seismic performance, with maximum displacements reaching up to 166 mm and strengths ranging from 6.4 to 8.4 kN. The study concludes that bahareque walls, particularly those incorporating soil mixes and horizontal guadua strips, exhibit high resilience under seismic conditions and provide a sustainable construction alternative for rural regions. The scope of this study is limited by the exclusion of dynamic seismic simulations, which could offer additional insights into the behavior of bahareque walls under real earthquake conditions. The novelty of this research lies in the direct evaluation of the seismic performance of traditional bahareque configurations, specifically comparing walls constructed with guadua and wooden frameworks, while emphasizing the critical role of soil infill and guadua strips in structural performance.