In this study, a two-link manipulator with flexible members is considered. The end point vibration signals are simulated by developing a MatLAB code based on the finite element theory and Newmark solution. Experimental results are also presented and compared with simulation results. The mass and stiffness matrices are time dependent because the angular positions of the links change during the motion. Trapezoidal velocity profiles for the actuating motors are used. The time dependent inertia forces are calculated by using the rigid body dynamics. The inertia forces are due to the motors, end point payload mass and distributed masses of the links. The acceleration, constant velocity and deceleration time intervals of the trapezoidal velocity profile are selected by considering the lowest natural frequency of the manipulator structure at the stopping position. Various starting and stopping positions are considered. The root mean square (RMS) acceleration values of the vibration signals after stopping are calculated. It is observed that the residual vibration is sensitive to the deceleration time. The RMS values are lowest if the inverse of the deceleration time equals to the first natural frequency. It is highest if the inverse of the deceleration time equals to the half of the first natural frequency. It is observed that simulation and experimental results are in good agreement.
9 June 2004 in Finite Elements in Analysis and Design
Extruded aluminum profiles are widely used in building and automation structures due to their durability, lightweight, corrosion resistance, shorter fastening time and reusability. Proper design is crucial in maintaining the lifespan of these structures. It is therefore essential to determine the structural behaviors of the structures such as the natural frequency, mode shape, etc. The finite element analysis is a method which has been commonly used in determining structural behaviors. However, there are also numerous problems in analyzing these kinds of profiles using solid finite elements, such as modeling, meshing, solution time problems, etc. Therefore, beam finite elements have been used in the present study in modeling of the profiles. Furthermore, an equivalent beam element model has been developed for bolt-together connectors of the profiles. Simulation and experimental modal analysis have been conducted on example test systems. It has been demonstrated that this modeling technique is very practical and the results obtained from the method agree well with the experimental results.
31 December 2022 in The European Journal of Research and Development
In this study, the design of a two scissors greenhouse lift trolley is considered. The maximum height of the platform from the ground is 3500 mm. A program developed in Visual BASIC to automate the design is introduced. The lift is modeled in SolidWorks (SW) and the finite element (FE) modal and static analyses are performed as an initial design first by using graphical user interface (GUI). The lift contains revolute joints and slider joints. A simply supported beam which has two revolute joints and a slider joint is studied to verify how to model the joints. Pim connectors are defined for revolute joints in SW-FE analysis. Spring connectors with very large values are defined between sliding faces in the normal direction for translational joints. The results obtained with solid finite elements in SW are compared with analytical results for the natural frequency and static analyses and it was observed that the results are in good agreement for the simply supported beam. An Excel file where a main sheet contains the list of the bodies and all the geometric values is created after the initial design. The Excel file also contains sheets for each body. Body sheets have all the dimensions in the sketches and features. The dimension values in the cells of the body sheets are defined by formulas related to the geometric values given in the main sheet. Kinematic, kinetic, and revision of the SW model are performed by the design automation program. The FE analyses are done by GUI and the results are evaluated. If the results are not satisfactory, the geometric values are changed in Excel file and the analyses are repeated. The final design is obtained by the iteration easily. The automation program and the procedure developed in this work can be extended other scissors lifts.
24 April 2025 in International Journal of Mechanical Engineering Education
Static, harmonic, transient-dynamic and random vibration analyses are widely used to design structures. Commercial finite element (FE) programs such as ANSYS are used to analyze structures with complex geometries. However, FE programs can produce erroneous results if the user makes even minor mistakes. Thus, it is important to understand the basic theory of FE solutions. The purpose of this work is to give the introductory theory of FE solutions by considering a two degree of mass-spring system. The MatLAB programs based on the analytical solutions are given. The MatLAB results are compared with the FE results by ANSYS. The system is modeled in SolidWorks and imported to ANSYS. Modal, static, harmonic frequency response, impulse response, and random vibration responses are considered. Modal and static analyses for unconstrained systems are also considered. The results obtained by MatLAB and ANSYS are in good agreement. The results of this study can be used by the users of other simulation programs for comparison.
In this study, the active vibration control (AVC) of a cantilever beam with an end mass is considered first and studied experimentally and through simulation. The Laplace transform method, Newmark method, and ANSYS are used for simulations. An impulse force applied to the mass and the velocity actuation applied to the base are assumed to be disturbance and controlling input, respectively. The displacement of the mass is taken as the feedback signal in simulations. Four strain gauges are located near the bottom point, connected with a Wheatstone bridge, and the output voltage of a load-cell amplifier (LCA) is used as the feedback signal in experiments. Strain feedback is considered in experiments because it is easy to implement, cost-effective, and can be used in applications. Experimental displacement signals obtained from the top of the beam are compared with the output signals from LCA and it is observed that they are approximately linearly dependent. Velocity input is generated with a servo motor-driven linear actuator in experiments. The closed loop control is achieved by a personal computer with an Adlink-9222 PCI DAQ card and a C program in the experiments. The integration of the closed loop control action into the transient solution with Newmark method and ANSYS is implemented in simulations. The input reference value is taken as zero for vibration control. The instantaneous value of the feedback signal at a time step is subtracted from zero to find the error signal value and the error value is multiplied by the control gain to calculate the controlling signal. The simulation results obtained with the Newmark method and ANSYS are in good agreement with the analytical results obtained with Laplace transform method. Simulation results are also in acceptable agreement with the experimental results for explaining the behavior of the success of AVC depending on the control gain, Kp. After verifying ANSYS solutions, the ANSYS procedure is applied to an aircraft wing as a real complex cantilever structure. The wing, with a length of 810.8 mm, 13 ribs with a length of 300 mm, and NACA 4412 airfoil, is considered in this study. It is observed that the AVC of real engineering structures can be simulated by integrating control action into transient solution in ANSYS.