Hailong Bai

Hailong Bai


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2022 in Metals
Verified
Journal Article
Open access
PDF file
JSJia Sun
Jia Sun
LZLingyan Zhao
Lingyan Zhao
HLHuaxin Liang
Huaxin Liang
YZYao Zhang
Yao Zhang
LXli xuexiong
li xuexiong
HBHailong Bai
Hailong Bai
Formation of intermetallic compounds (IMCs) exhibits remarkable microstructural features and provides opportunities for microstructure control of microelectronic interconnects. Excessive formation of brittle IMCs at the Cu/Sn interface such as η-Cu6Sn5 can deteriorate the reliability and in turn lead to solder joint failure in the Pb-free Sn-based solder joints. Phase field method is a versatile tool for prediction of the mesoscopic structure evolution in solders, which does not require tracking interfaces. The relationships between the microstructures, reliability and wettability were widely investigated, and several formation and growth mechanisms were also proposed for η-Cu6Sn5. In this paper, the current research works are reviewed and the prospective of the application of phase field method in the formation of η-Cu6Sn5 are discussed. Combined phase field simulations hold great promise in modeling the formation kinetics of IMCs with complex microstructural and chemical interactions.

29 September 2022 in Metals
Verified
Journal Article
Open access
PDF file
JSJia Sun
Jia Sun
HLHuaxin Liang
Huaxin Liang
SSShaofu Sun
Shaofu Sun
JHJuntao Hu
Juntao Hu
CTChunyu Teng
Chunyu Teng
HBHailong Bai
Hailong Bai
In comparison to Pb-based solders which have a toxic effect, the tin-silver-copper (SAC) family of alloys have relatively strong reliability and are widely used in the electronics industry. Phase separation and coarsening phenomenon on the surface of 96.5 wt. % Sn-3.0 wt. % Ag-0.5 wt. % Cu (SAC305) solder products exhibit special microstructural features and offer opportunities for the microstructure control of microelectronic interconnects. However, the formation mechanism of such morphological patterns is still unknown. Here, we applied a combination of experimental and phase field methods to study how such patterns form. It was observed that the pattern was Sn-rich and exhibited the characteristic morphology of spinodal decomposition. Contrary to earlier findings that only binary systems like Sn-Pb and Sn-Bi experienced such phenomena, spinodal decomposition was firstly observed in ternary solder system Sn-Ag-Cu. Morphology of Sn-rich patterns depended on whether the spinodal decomposition reacted completely. SAC305 solder alloy was easily decomposed by Sn component after being heated to roughly 260 °C. The above conclusions could offer theoretical support for quantitatively controlling the microstructure of solder alloys and would enhance the quality of related products.

16 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
DCDongdong Chen
Dongdong Chen
JQJunhu Qin
Junhu Qin
XZXin Zhang
Xin Zhang
DLDongcheng Liang
Dongcheng Liang
HBHailong Bai
Hailong Bai
JYJikang Yan
Jikang Yan
In this study, the interfacial structure and abnormal long-term increase of tensile strength in the interfacial intermetallic compounds (IMCs) between SnAg3Cu0.5 solder and Cu substrates during isothermal aging were investigated. After reflow soldering, the IMC layer at the interface was thin and scallop-type. The interfacial layer became thicker with the increase in aging time. After 200 h of aging at 150 °C, the thickness of the interface gradually increased to 3.93 μm and the interface became smooth. Compared with the unaged Cu-Sn interface, the aged joint interface contained more Cu3Sn. The top of the IMC being reflown was relatively smooth, but became denser and prismatic in shape after 200 h of aging at 150 °C. The tensile strength of the joint, immediately after the reflow, reached 81.93 MPa. The tensile properties of the solder joints weakened and then strengthened as they aged. After 200 h of aging at 150 °C, the tensile strength was 83.86 MPa, which exceeded that of the unaged solder joint interface, because the fracture mode of the solder joints changed during aging.