TiO2 doped with different amounts of Cu2+ ions (from 0 to 3 mol%) was synthesized by sol-gel method. The samples were characterized by X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The XRD analysis showed that the Cu-doped TiO2 samples exhibit anatase and rutile phases. The lattice parameters remain unchanged, independent of Cu2+ content. Diameter of TiO2 increased significantly with increasing concentrations of Cu2+. The investigated results indicate that a greater portion of the Cu2+ ions are well incorporated into the anatase and rutile TiO2 lattices. The stretching vibration frequencies of the interatomic bonds were calculated by the electronegativity principle. The calculated data were compared with infrared spectra. The results show that in the rutile and anatase phases, O atoms in the TiO2 lattice and some interstitial Cu atoms form Cu-O bond, and other substitutional Cu that replaces Ti atoms in TiO2 lattice form Cu-O bond with O atoms in the TiO2 lattice.
In this study, the interfacial structure and abnormal long-term increase of tensile strength in the interfacial intermetallic compounds (IMCs) between SnAg3Cu0.5 solder and Cu substrates during isothermal aging were investigated. After reflow soldering, the IMC layer at the interface was thin and scallop-type. The interfacial layer became thicker with the increase in aging time. After 200 h of aging at 150 °C, the thickness of the interface gradually increased to 3.93 μm and the interface became smooth. Compared with the unaged Cu-Sn interface, the aged joint interface contained more Cu3Sn. The top of the IMC being reflown was relatively smooth, but became denser and prismatic in shape after 200 h of aging at 150 °C. The tensile strength of the joint, immediately after the reflow, reached 81.93 MPa. The tensile properties of the solder joints weakened and then strengthened as they aged. After 200 h of aging at 150 °C, the tensile strength was 83.86 MPa, which exceeded that of the unaged solder joint interface, because the fracture mode of the solder joints changed during aging.
25 November 2025 in Journal of Electronic Materials