Nitrogen use efficiency (NUE) is a central issue to address regarding the nitrogen (N) uptake by crops, and can be improved by applying the correct dose of fertilizers at specific points in the fields according to the plants status. The N nutrition index (NNI) was developed to diagnose plant N status. However, its determination requires destructive, time-consuming measurements of plant N content (PNC) and plant dry matter (PDM). To overcome logistical and economic problems, it is necessary to assesses crop NNI rapidly and non-destructively. According to the literature which we reviewed, it, as well as PNC and PDM, can be estimated using vegetation indices obtained from remote sensing. While sensory techniques are useful for measuring PNC, crop growth models estimate crop N requirements. Research has indicated that the accuracy of the estimate is increased through the integration of remote sensing data to periodically update the model, considering the spatial variability in the plot. However, this combination of data presents some difficulties. On one hand, at the level of remote sensing is the identification of the most appropriate sensor for each situation, and on the other hand, at the level of crop growth models is the estimation of the needs of crops in the interest stages of growth. The methods used to couple remote sensing data with the needs of crops estimated by crop growth models must be very well calibrated, especially for the crop parameters and for the environment around this crop. Therefore, this paper reviews currently available information from Google Scholar and ScienceDirect to identify studies relevant to crops N nutrition status, to assess crop NNI through non-destructive methods, and to integrate the remote sensing data on crop models from which the cited articles were selected. Finally, we discuss further research on PNC determination via remote sensing and algorithms to help farmers with field application. Although some knowledge about this determination is still necessary, we can define three guidelines to aid in choosing a correct platform.

Applying the correct dose of nitrogen (N) fertilizer to crops is extremely important. The current predictive models of yield and soil–crop dynamics during the crop growing season currently combine information about soil, climate, crops, and agricultural practices to predict the N needs of plants and optimize its application. Recent advances in remote sensing technology have also contributed to digital modelling of crop N requirements. These sensors provide detailed data, allowing for real-time adjustments in order to increase nutrient application accuracy. Combining these with other tools such as geographic information systems, data analysis, and their integration in modelling with experimental approaches in techniques such as machine learning (ML) and artificial intelligence, it is possible to develop digital twins for complex agricultural systems. Creating digital twins from the physical field can simulate the impact of different events and actions. In this article, we review the state-of-the-art of modelling N needs by crops, starting by exploring N dynamics in the soil−plant system; we demonstrate different classical approaches to modelling these dynamics so as to predict the needs and to define the optimal fertilization doses of this nutrient. Therefore, this article reviews the currently available information from Google Scholar and ScienceDirect, using relevant studies on N dynamics in agricultural systems, different modelling approaches used to simulate crop growth and N dynamics, and the application of digital tools and technologies for modelling proposed crops. The cited articles were selected following the exclusion criteria, resulting in a total of 66 articles. Finally, we present digital tools and technologies that increase the accuracy of model estimates and improve the simulation and presentation of estimated results to the manager in order to facilitate decision-making processes.

The requirements for a good stand in a no-till field are the same as those for conventional planting as well as added field and machinery management. Among the various factors that contribute towards producing a successful maize crop, seed depth placement is a key determinant. Although most no-till planters on the market work well under good soil and residue conditions, adjustments and even modifications are frequently needed when working with compacted or wet soils or with heavy residues. The main objective of this study, carried out in 2010, 2011 and 2012, was to evaluate the vertical distribution and spatial variability of seed depth placement in a maize crop under no-till conditions, using precision farming technologies and conventional no-till seeders. The results obtained indicate that the seed depth placement was affected by soil moisture content and forward speed. The seed depth placement was negatively correlated with soil resistance and seeding depth had a significant impact on mean emergence time and the percentage of emerged plants. Shallow average depth values and high coefficients of variation suggest a need for improvements in controlling the seeders’ sowing depth mechanism or more accurate calibration by operators in the field.

The Senise red pepper, known as peperone crusco, is a protected geographical indication (PGI) product from Basilicata, Italy, traditionally consumed dried. Producers use semi-open greenhouses to meet PGI standards, but significant losses are caused by rot from microorganisms thriving in high moisture, temperature, and humidity, which also encourage pest infestations. To minimize losses, a low-cost alert system was developed. The study, conducted in summer 2022 and 2023, used external parameters from the ALSIA Senise weather station and internal sensors monitoring the air temperature and humidity inside the greenhouse. Since rot is complex and difficult to model, an artificial intelligence (AI)-based approach was adopted. A feed forward neural network (FFNN) estimated greenhouse climate conditions as if it were empty, comparing them with actual values when peppers were present. This revealed the most critical period was the first 3–4 days after introduction and identified a critical air relative humidity threshold. The system could also predict microclimatic parameters inside the greenhouse with red peppers, issuing warnings one hour before risk conditions arose. In 2023, it was tested by comparing predicted values with previously identified thresholds. When critical levels were exceeded, greenhouse operators were alerted to adjust conditions. In 2023, pepper rot decreased.

Heat stress has been identified as one of the main challenges for dairy production systems, particularly in the context of global warming. This one-year study aimed to evaluate the impact of heat stress on milk yield and composition in a dairy farm located in the Elvas region of Portugal. A pack of electronic sensors was installed in the lactating animal facilities, allowing continuous recording of environmental data (temperature, humidity, ammonia and carbon dioxide). Based on these data, the Temperature-Humidity Index (THI) was automatically calculated on a daily basis, with the values subsequently aggregated into 7-day moving averages and integrated with milk production records, somatic cell count, and milk fat and protein content. The results indicate a significant influence of THI on both milk yield and composition, particularly on protein and fat content. The relationships between the variables were found to be non-linear, which contrasts with some results described in the literature. These discrepancies may be related to genetic differences between animals, variations in diets, production levels, management conditions, or the statistical models used in previous studies. Dry matter intake proved to be an important predictive variable. These findings reinforce the importance of ensuring animal welfare through continuous environmental monitoring and the implementation of effective heat stress mitigation strategies in the dairy sector.

In Mediterranean farming systems, the semi-arid conditions and agricultural ecosystems have made site-specific management an important approach. This method aims to understand and handle the variability of soil properties and crop management, particularly through the utilization of geospatial information and accessible technology. Over three years in a 30 ha experimental field located in the Alentejo region (Portugal), crop establishment was monitored using data from soil apparent electrical conductivity (ECa), remote sensing (Sentinel-2), and in situ soil sampling. The procedure began with Step 1, involving the acquisition of soil spatial information and spatial interpolation. Subsequently, in Step 2, management zones (MZs) for soil characteristics were delineated using a combination of ECa measurements and soil analysis, and Step 3 spanned over three years of gathering meteorological data and crop remote sensing measurements. In Step 4, site-specific crop MZs were delineated by vegetation indexes (VIs). This article aims to increase the importance of in situ and remote assessments to more accurately identify areas with different productive potential. Results showed three MZs based on the percentage of sand, ECa, altimetry, exchangeable calcium, and exchangeable calcium properties, validated by crop VIs (Normalized Difference Vegetation Index (NDVI), Normalized Difference Red-Edge Index (NDRE), and Normalized Difference Moisture Index (NDMI)) over time. Although there are many sensorial techniques available for site-specific management, this paper emphasizes a methodology for the farmer to identify different MZs combining remote and in situ evaluations, supporting new opportunities for a more rational use of natural resources. Based on soil parameters, three site-specific management areas could be selected. NDMI was the index that best explained the MZs created according to soil properties.