Nitrogen use efficiency (NUE) is a central issue to address regarding the nitrogen (N) uptake by crops, and can be improved by applying the correct dose of fertilizers at specific points in the fields according to the plants status. The N nutrition index (NNI) was developed to diagnose plant N status. However, its determination requires destructive, time-consuming measurements of plant N content (PNC) and plant dry matter (PDM). To overcome logistical and economic problems, it is necessary to assesses crop NNI rapidly and non-destructively. According to the literature which we reviewed, it, as well as PNC and PDM, can be estimated using vegetation indices obtained from remote sensing. While sensory techniques are useful for measuring PNC, crop growth models estimate crop N requirements. Research has indicated that the accuracy of the estimate is increased through the integration of remote sensing data to periodically update the model, considering the spatial variability in the plot. However, this combination of data presents some difficulties. On one hand, at the level of remote sensing is the identification of the most appropriate sensor for each situation, and on the other hand, at the level of crop growth models is the estimation of the needs of crops in the interest stages of growth. The methods used to couple remote sensing data with the needs of crops estimated by crop growth models must be very well calibrated, especially for the crop parameters and for the environment around this crop. Therefore, this paper reviews currently available information from Google Scholar and ScienceDirect to identify studies relevant to crops N nutrition status, to assess crop NNI through non-destructive methods, and to integrate the remote sensing data on crop models from which the cited articles were selected. Finally, we discuss further research on PNC determination via remote sensing and algorithms to help farmers with field application. Although some knowledge about this determination is still necessary, we can define three guidelines to aid in choosing a correct platform.

Applying the correct dose of nitrogen (N) fertilizer to crops is extremely important. The current predictive models of yield and soil–crop dynamics during the crop growing season currently combine information about soil, climate, crops, and agricultural practices to predict the N needs of plants and optimize its application. Recent advances in remote sensing technology have also contributed to digital modelling of crop N requirements. These sensors provide detailed data, allowing for real-time adjustments in order to increase nutrient application accuracy. Combining these with other tools such as geographic information systems, data analysis, and their integration in modelling with experimental approaches in techniques such as machine learning (ML) and artificial intelligence, it is possible to develop digital twins for complex agricultural systems. Creating digital twins from the physical field can simulate the impact of different events and actions. In this article, we review the state-of-the-art of modelling N needs by crops, starting by exploring N dynamics in the soil−plant system; we demonstrate different classical approaches to modelling these dynamics so as to predict the needs and to define the optimal fertilization doses of this nutrient. Therefore, this article reviews the currently available information from Google Scholar and ScienceDirect, using relevant studies on N dynamics in agricultural systems, different modelling approaches used to simulate crop growth and N dynamics, and the application of digital tools and technologies for modelling proposed crops. The cited articles were selected following the exclusion criteria, resulting in a total of 66 articles. Finally, we present digital tools and technologies that increase the accuracy of model estimates and improve the simulation and presentation of estimated results to the manager in order to facilitate decision-making processes.

In Mediterranean farming systems, the semi-arid conditions and agricultural ecosystems have made site-specific management an important approach. This method aims to understand and handle the variability of soil properties and crop management, particularly through the utilization of geospatial information and accessible technology. Over three years in a 30 ha experimental field located in the Alentejo region (Portugal), crop establishment was monitored using data from soil apparent electrical conductivity (ECa), remote sensing (Sentinel-2), and in situ soil sampling. The procedure began with Step 1, involving the acquisition of soil spatial information and spatial interpolation. Subsequently, in Step 2, management zones (MZs) for soil characteristics were delineated using a combination of ECa measurements and soil analysis, and Step 3 spanned over three years of gathering meteorological data and crop remote sensing measurements. In Step 4, site-specific crop MZs were delineated by vegetation indexes (VIs). This article aims to increase the importance of in situ and remote assessments to more accurately identify areas with different productive potential. Results showed three MZs based on the percentage of sand, ECa, altimetry, exchangeable calcium, and exchangeable calcium properties, validated by crop VIs (Normalized Difference Vegetation Index (NDVI), Normalized Difference Red-Edge Index (NDRE), and Normalized Difference Moisture Index (NDMI)) over time. Although there are many sensorial techniques available for site-specific management, this paper emphasizes a methodology for the farmer to identify different MZs combining remote and in situ evaluations, supporting new opportunities for a more rational use of natural resources. Based on soil parameters, three site-specific management areas could be selected. NDMI was the index that best explained the MZs created according to soil properties.

The current Common Agriculture Policy (CAP) foresees a reduction of 50% in the use of herbicides by 2030. This study investigates the potential of integrating remote sensing with a low-cost RGB sensor and variable-rate technology (VRT) to optimize herbicide application in a ryegrass (Lolium multiflorum Lam.) fodder crop. The trial was conducted on three 7.5-hectare plots, comparing a variable-rate application (VRA) of herbicide guided by a prescription map generated from segmented digital images, with a fixed-rate application (FRA) and a control (no herbicide applied). The weed population and crop biomass were assessed to evaluate the efficiency of the proposed method. Results revealed that the VRA method reduced herbicide usage by 30% (0.22 l ha⁻¹) compared to the FRA method, while maintaining comparable crop production. These findings demonstrate that smart weed management techniques can contribute to the CAP’s sustainability goals by reducing chemical inputs and promoting efficient crop production. Future research will focus on improving weed recognition accuracy and expanding this methodology to other cropping systems.

Increasing nitrogen use efficiency (NUE) by improving agricultural practices and soil knowledge, and implementing precision agriculture, is essential to reduce the overuse of fertilizers and increase nutrient retention. This study aimed to optimize N management in agriculture by establishing a critical N dilution curve (CNDC) and analyzing variations in NUE and the N nutrition index (NNI) among different crops under various treatments. Using a Bayesian model, the CNDC was determined as %N_c = 3.63 × PDM^−0.71. The results showed that plant dry matter (PDM) and plant N content (PNC) varied significantly with crop type and sampling moments. Strong positive correlations are presented by PDM with N uptake (NUp) (0.89) and NNI (0.88), along with an inverse correlation with critical N concentration (−0.95). The study found that crops under irrigation conditions had higher NUp and higher NNI. This study provides valuable insights into the influence of key management decisions on the N nutritional status of annual ryegrass-based forage crops. The results highlight the critical role of accurate and conscious decision-making in improving NUE and crop yields, emphasizing the complex interactions between biomass production and N dynamics in crops. The conclusions allow significant benefits to be realized, contributing to the sustainability of agricultural systems.

Monoculture systems depend on high nitrogen (N) fertilisation. Incorporating legumes into forage crops offers a sustainable alternative with agronomic and economic benefits. This study assesses the impact of legumes in fodder systems, evaluating yield, N use efficiency (NUE), and profitability while identifying the best cropping strategy under semi-arid conditions. The experiment, conducted at Herdade da Comenda, Elvas, Portugal, used a split–split-plot randomised block design to analyse N doses, forage species, and irrigation. Economic metrics, including costs, net revenue, return on investment, and risk analysis, were also assessed. Moderate N doses (120 kg ha⁻¹) resulted in significantly higher NUE (15.67 kg kg⁻¹ N) than higher doses (200 kg ha⁻¹), which yield only 1.40 kg kg⁻¹ N (p < 0.05), particularly in mixed fodder crops. Irrigation improved N absorption, crop nutrition, and yield, leading to higher profitability despite increased initial costs. Agronomically, irrigation and N doses influenced yield and nutrient uptake, while no significant differences were observed between different forage crops in terms of yield or NUE. Economically, the irrigated mixed crop showed the highest return on investment (ROI = 247.37 EUR ha⁻¹), whereas ryegrass presented lower financial risk (BE = 2213.24 kg ha⁻¹) due to lower establishment costs. Yield was the strongest predictor of net profit (R² = 0.89). Looking ahead, optimising N management, irrigation strategies, and mixed grass–legume crops will be crucial to maximising economic returns while minimising environmental impacts.