Quantum dots of ZnSe, an interesting optical material for blue light lasers, have been prepared by nucleation and growth from a supersaturated glass solution. The average nanoparticle diameter of as-cast ZnSe-in-glass samples was 5 5 1 7 nm, and an average diameter of 3 7 1 1 nm was obtained with rapid quenching. The experimentally observed quantum dot sizes are less than the Bohr exciton diameter of 11 4nm, consistent with an observed blue shift in the absorption edge of about 0 52 eV. HRTEM revealed the ZnSe quantum dots to be single crystal in nature, with a few larger internally twinned particles observed in the larger crystals present in the as-cast sample. EDXS data indicated the majority of particles to be ZnSe, with SAED confirming the cubic structure. A minority of the quantum dots were found to be composed of selenium or selenium oxide, and were redissolvable in the glass matrix under conditions of strong convergence of the electron beam during TEM analysis.
Magnesium-based alloy WE43 is a state-of-the-art bioresorbable metallic implant material. There is a need for implants with both complex geometries to match the mechanical properties of bone and refined microstructure for controlled resorption. Additive manufacturing (AM) using laser powder bed fusion (LPBF) presents a viable fabrication method for implant applications, as it offers near-net-shape geometrical control, allows for geometry customization based on an individual patient, and fast cooling rates to achieve a refined microstructure. In this study, the laser–alloy interaction is investigated over a range of LPBF-relevant processing conditions to reveal melt-pool dynamics, pore formation, and the microstructure of laser-melted WE43. In situ X-ray imaging reveals distinct laser-induced vapor depression morphology regimes, with minimal pore formation at laser-scan speeds greater than 500 mm/s. Optical and electron microscopy of cross-sectioned laser tracks reveal three distinct microstructural regimes that can be controlled by adjusting laser-scan parameters: columnar, dendritic, and banded microstructures. These regimes are consistent with those predicted by the analytic solidification theory for conduction-mode welding, but not for keyhole-mode tracks. The results provide insight into the fundamental laser–material interactions of the WE43 alloy under AM-processing conditions and are critical for the successful implementation of LPBF-produced WE43 parts in biomedical applications.