Shaowu Jiu

Prof. Shaowu Jiu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2021 in Processes
Verified
Journal Article
Open access
PDF file
BZBo Zhao
Bo Zhao
YCYanxin Chen
Yanxin Chen
SJShaowu Jiu
Shaowu Jiu
A new roasting process with a conveying bed was constructed and used to remove sulfur of high-sulfur bauxite. Roasting temperature, phase transformation, microcrystal, specific surface area of high-sulfur bauxite, and the mechanism of the reaction during the roasting process were analyzed. The digestion properties of roasted bauxite were also investigated. The results showed that the sulfur in high-sulfur bauxite can be efficiently removed by roasting in the conveying bed at 520–720 °C for 2 s. Major reactions of high-sulfur bauxite during roasting were the dehydration of minerals, desulfurization of pyrite, sulfation of SO2, and decomposition of sulfate. The rate of mineral dehydration reaction was significantly slower than that of the desulfurization reaction. The specific surface area of roasted ore greatly increased, and the microcrystal of Al-O mineral was refined, which was conducive to Al2O3 digestion. The mass fraction of sulfide sulfur in high-sulfur bauxite was reduced from 1.20% to 0.01%, and the relative digestibility of alumina reached more than 99% when roasting at 600 °C for 2 s. This paper provides revelations and instructions for the process development and application of high-sulfur bauxite.

18 March 2021 in Materials
Verified
Journal Article
Open access
PDF file
SCSimeng Cheng
Simeng Cheng
SJShaowu Jiu
Shaowu Jiu
HLHui Li
Hui Li
The analysis of gaseous products reveals the characteristics, mechanisms, and kinetic equations describing the dehydroxylation and decarburization in coal series kaolinite. The results show that the dehydroxylation of coal series kaolinite arises from the calcination of kaolinite and boehmite within the temperature range of 350–850 °C. The activation energy for dehydroxylation is 182.71 kJ·mol−1, and the mechanism conforms to the A2/3 model. Decarburization is a two-step reaction, occurring as a result of the combustion of carbon and the decomposition of a small amount of calcite. The temperature range in the first step is 350–550 °C, and in the second is 580–830 °C. The first step decarburization reaction conforms to the A2/3 mechanism function, and the activation energy is 160.94 kJ·mol−1. The second step decarburization reaction follows the B3 mechanism function, wherein the activation energy is 215.47 kJ·mol−1. A comparison with the traditional methods proves that the kinetics method utilizing TG-FTIR-MS is feasible.

11 March 2024 in Processes
Verified
Journal Article
Open access
PDF file
HZHongbo Zhang
Hongbo Zhang
SJShaowu Jiu
Shaowu Jiu
QGQianwen Gao
Qianwen Gao
SZSijun Zhao
Sijun Zhao
YCYanxin Chen
Yanxin Chen
BZBo Zhao
Bo Zhao
Although the calcination-based activation of coal gangue is important for its valorization in the form of cementitious materials, the related works mainly focus on high-quality coal gangue, neglecting its low-quality counterpart. To bridge this gap, we herein conducted the pilot-scale suspension calcination of low-quality coal gangue; explored the effects of calcination temperature, particle size, and O2 content on the phase composition of the calcined product, kaolinite decomposition, decarbonization, and silica/alumina dissolution; and evaluated calcination-product-based cementitious materials. Under optimal conditions (temperature = 875–900 °C; particle size = 39.71–46.84 μm; and O2 content = 12–14%), the carbon content of the calcined product equaled 1.24–1.87 wt%, and the dissolution rates of activated alumina and silica were 77.6–79.5% and 49.4–51.1%, respectively. The 28 d compressive strength (50.8–55.7 MPa) and true activity index (98.8–108.4%) of the cementitious material prepared at a calcination product dosage of 30–38 wt% met the standard of 42.5 grade cement. This study demonstrated the suitability of suspension calcination for the preparation of high-performance low-carbon cementitious materials from low-quality coal gangue, thus providing a basis for further industrialization and technological development.

12 August 2022 in Processes
Verified
Journal Article
Open access
PDF file
SJShaowu Jiu
Shaowu Jiu
BZBo Zhao
Bo Zhao
YCYanxin Chen
Yanxin Chen
The reaction process, mechanism, and kinetics of the desulfurization of high-sulfur bauxite during calcination were investigated using thermal analysis–infrared analysis. A conveyor-bed calcination system was used to study the variations in the physical phase, desulfurization rate, and alumina dissipation rate of high-sulfur bauxite in the range of 500 °C–650 °C. The results show that sclerite monohydrate, kaolinite, rhodochrosite, pyrite, and dolomite mainly decompose during the calcination of high-sulfur bauxite, generating H2O(g), CO2, and SO2 as gaseous products. The decomposition of sclerite monohydrate and kaolinite and the dehydroxylation reactions of rhodochrosite and pyrite occur at <650 °C, with inseparable temperature overlap. High-sulfur bauxite desulfurization follows a three-dimensional spherical diffusion mechanism, with an activation energy of 181.16 kJ/mol, controlled by the diffusion rate of O2 or SO2 through the solid product layer. High-sulfur bauxite was calcined at 600 °C–650 °C for around 3.5 s in a conveyor bed, resulting in a negative divalent sulfur content of 0.98, and relative dissolution rate of alumina of >99%, satisfying the requirements of aluminum extraction via the Bayer method. The desulfurization rate predictions of the kinetic model were consistent with the experimental data.

9 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
FPFeifei Peng
Feifei Peng
CCChang Chen
Chang Chen
SJShaowu Jiu
Shaowu Jiu
QSQiang Song
Qiang Song
YCYanxin Chen
Yanxin Chen
The production of autoclaved aerated concrete via the autoclaving process incurs substantial energy consumption, posing a challenge to sustainable economic development. Herein, a novel nonautoclaved aerated concrete (NAAC) was prepared using sulfoaluminate cement as the primary raw material and aluminum powder as the aerating agent. The physicomechanical characteristics and pore structures of the sulfoaluminate-cement-based (SAC) NAAC (SAC-NAAC) were examined through X-ray diffraction, thermogravimetry, and scanning electron microscopy. The findings revealed that the optimal mechanical attributes of the SAC-NAAC were achieved at a water–cement ratio of 0.55, with a specific content ratio of polycarboxylate superplasticizer–borax–calcium stearate–sodium hydroxide at 0.24%:0.32%:0.36%:2.90%, along with 0.40% aluminum powder. The SAC-NAAC samples, with a bulk density range of 600–750 g/m3, exhibited a compressive strength of 3.55–4.16 MPa, porosity of 45.9–63.5%, and water absorption rate of 60.2–74.4%. The weight loss in the SAC-NAAC with different aluminum powder contents ranged between 15.23% and 16.83%. The prismatic ettringite (AFt) crystals served as the main source of strength for the SAC-NAAC, and AH3 was attached to the AFt surfaces in a microcrystalline gel phase, thereby further enhancing the strength of the SAC-NAAC. Thus, the lightweight, high-strength SAC-NAAC has great potential as a nonautoclaved aerated concrete.

11 October 2022 in Processes
Verified
Journal Article
Open access
PDF file
SCSimeng Cheng
Simeng Cheng
SJShaowu Jiu
Shaowu Jiu
HLHui Li
Hui Li
The reaction process, mechanism, and kinetics of the decarbonation of coal-series kaolinite (CSK) were investigated using the thermal analysis (TG)–infrared spectrum analysis (IR) coupling method. A pilot test was performed using a suspended calcination system. Further, the carbon content, phase composition, whiteness, oil-absorbed value, and micromorphology of calcined kaolin were characterized. Results showed that the decarburization reaction of CSK was a two-step reaction that mainly occurred in the ranges of 593 °C–836 °C. The mechanism of the decarburization reaction was a phase-boundary reaction (unreacted-core shrinking model) with an activation energy of 214.56 kJ/mol. Calcination at 900 °C or 950 °C for ~3.3 s in a suspension reactor resulted in the decarburization rate of CSK becoming >99.9%. The whiteness of calcined kaolin was mainly positively associated with the decarburization rate, and increasing the calcination temperature aided in increasing the whiteness. The oil-absorbed value of calcined kaolin was positively correlated with the specific surface area. Insufficient or over-calcination decreased the oil-absorbed value of calcined kaolin products. The calcined kaolin product with a whiteness of 89.3% and an oil-absorbed value of 76.1 g/100 g was obtained via suspension calcination process, which meets the requirements of calcined kaolin for paper-making.