Mengfu Di

Dr. Mengfu Di

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2020 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
MDMengfu Di
Mengfu Di
CLCheng Li
Cheng Li
ZPZijin Pan
Zijin Pan
AWAlbert Wang
Albert Wang
Charged device model (CDM) electrostatic discharge (ESD) protection remains a huge challenge for integrated circuit (IC) reliability designs. The “internal-oriented” CDM model and the “external-oriented” human body model (HBM) describe fundamentally different ESD phenomena. Through the comprehensive analysis, this paper concludes that the classic pad-based ESD protection methods, commonly used for “from-external-to-internal” HBM ESD protection, are theoretically not working for “from-internal-to-external” CDM ESD protection. It states that the actual internal distribution of static charges within a chip is vitally critical to CDM ESD protection. The discovery explains the potential root cause of the randomness and uncertainty of pad-based CDM ESD protection designs commonly observed today, hence calls for new CDM ESD protection solutions.

17 August 2021 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
MDMengfu Di
Mengfu Di
ZPZijin Pan
Zijin Pan
CLCheng Li
Cheng Li
AWAlbert Wang
Albert Wang
Electrostatic discharge (ESD) protection is a grand design challenge for complex ICs in advanced technologies. ESD simulation is indispensable to guide ESD protection designs. However, no existing ESD simulation methods may accurately predict ESD protection designs in a universal manner due to various inherent limitations. TCAD-based ESD simulation is very useful for ESD protection designs. Transmission line pulse (TLP) and very fast TLP (VFTLP) are widely used to evaluate human body model (HBM) and charged device model (CDM) ESD protection designs, which provide rich details for calibrating TCAD ESD simulation for design prediction and validation. Using various ESD protection devices fabricated in 28nm CMOS and 45nm SOI CMOS technologies, a comprehensive experimental and simulation study finds that the ESD stimuli used in TCAD ESD design simulation have profound impacts on many subtle ESD protection behaviors, particularly in comparison with ESD testing. This study cautions against over-interpretation of TCAD ESD simulation results, obtained using any specific ESD stimulus, attempting to accurately predict practical ESD protection designs. A mixed-mode multiple-stimuli ESD simulation method is therefore developed to address the ESD stimulus induced ESD performance variation, hence offering a technique to achieve ESD protection design prediction.

28 September 2020 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
ZPZijin Pan
Zijin Pan
CLCheng Li
Cheng Li
MDMengfu Di
Mengfu Di
FZFeilong Zhang
Feilong Zhang
AWAlbert Wang
Albert Wang
On-chip electrostatic discharge (ESD) protection design for integrated circuits (ICs) is a challenging design-for-reliability problem. Since ESD events involve very high current transients in very short time period, current crowding is unavoidable, which leads to local overheating and creates local hot spots, resulting in ESD thermal failures. Therefore, layout design plays a critical role in practical ESD protection designs, which cannot be addressed by 2D TCAD ESD simulation. This paper reports a comprehensive ESD simulation analysis by comparing true 3D TCAD with 2D TCAD, using exemplar diode ESD devices in a 55nm CMOS, which reveals 3D ESD discharging behaviors upon ESD layout variations. It concludes that true 3D TCAD ESD simulation is a powerful technique to enable ESD layout design optimization in real-world ESD protection designs.

15 September 2021 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
MDMengfu Di
Mengfu Di
CLCheng Li
Cheng Li
ZPZijin Pan
Zijin Pan
AWAlbert Wang
Albert Wang
Charged device model (CDM) electrostatic discharge (ESD) protection is an emerging design challenge to ICs at advanced technology nodes. It was recently reported that the traditional pad-based CDM ESD protection methods are fundamentally faulty, which causes uncertainties in CDM ESD protection designs, testing and failure analysis. Re-thinking of onchip CDM ESD protection becomes imperative for complex ICs implemented in advanced technologies. This paper reports a disruptive CDM ESD protection method utilizing non-pad-based internally-distributed ESD protection network as a robust in situ in-operando CDM ESD protection solution. The proposed internal-distributed CDM ESD protection mesh network can be realized using interposer or through-silicon-via (TSV) ESD protection structures to achieve local 3D CDM ESD protection via heterogeneous integration. The new concept was validated using an internal-CDM-protected oscillator IC implemented in a foundry 45nm silicon-on-insulator (SOI) technology.

26 November 2021 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
MDMengfu Di
Mengfu Di
ZPZijin Pan
Zijin Pan
FZFeilong Zhang
Feilong Zhang
CLCheng Li
Cheng Li
HWHan Wang
Han Wang
AWAlbert Wang
Albert Wang
This paper presents the first co-design analysis of 28GHz broadband single-pole double-throw (SPDT) distributed travelling wave RF switches implemented in a foundry 22nm fully-depleted silicon-on-insulator (FDSOI) CMOS technology, featuring 9KV full-chip human body model (HBM) electrostatic discharge (ESD) protection. This ESD-protected millimeter wave (mmWave) SPDT switch is designed for highly reliable above-6GHz 5th-generation (5G) mobile systems, covering the n257 and n258 bands. Adverse influences of the inherent ESD-induced parasitic effects are characterized, revealing that the ESD effects can severely affect RF switch performance in mmWave bands. A new ESD-mmWave-switch co-design technique was developed to address this ESD design challenge for mmWave switches, which was validated in Si measurements, e.g., improving the switch insertion loss (IL) by 4dB for the 28GHz SPDT travelling wave switches fabricated. This design also achieves the highest reported charged device model (CDM) ESD protection of 1.84A in Si testing. This study proves that ESD-mmWave-switch co-design is critical to RF front-end designs for 5G mobile systems, which typically require robust ESD protection, but are also very sensitive to the inevitable ESD-induced parasitic effects.

17 June 2021 in IEEE Transactions on Device and Materials Reliability
Verified
Journal Article
Closed access
CLCheng Li
Cheng Li
QCQi Chen
Qi Chen
JNJimmy Ng
Jimmy Ng
FZFeilong Zhang
Feilong Zhang
HWHan Wang
Han Wang
AWAlbert Wang
Albert Wang
On-chip electrostatic discharge (ESD) protection is becoming more challenging for integrated circuits (ICs) made in advanced technology nodes. The ESD-induced design overhead, including ESD parasitic effects and layout area, inherent to the traditional in-Silicon PN-junction-based ESD protection devices, rapidly becomes unbearable to high-performance and complex ICs. A disruptive above-Si mechanical ESD switch device, made in CMOS backend using a graphene nano-electromechanical-system (gNEMS) structure, was recently devised and demonstrated using poly-crystalline graphene films. This paper reports design, fabrication and comprehensive characterization of single-crystalline gNEMS ESD switch devices. Measurement using transmission line pulse (TLP) and very fast transmission line pulse (VFTLP) ESD testing reveals superior ESD protection capability of gNEMS devices made in single-crystalline graphene over its poly-crystalline counterparts, achieving a record-high ESD current handling capability of I t2 ~ 1.19 ×10 10 A/cm 2 under TLP zapping and I t2 ~ 6.09×10 9 A/cm 2 under VFTLP stressing. The ESD robustness enhancement related to single-crystalline graphene material property is discussed.