Electrostatic discharge (ESD) protection remains a major challenge to integrated circuits (ICs), particularly for complex chips implemented at advanced technology nodes. Over decades, substantial advances have been made to on-chip ESD protection. This paper, instead of reviewing various specific ESD protection structures reported, provides an overview of selected key topics on practical ESD protection designs, focusing on new ESD protection concepts and design methodologies, as well as an outlook to future ESD protection designs.
1 May 1995 in Journal of the Electrochemical Society
Full-chip electrostatic discharge (ESD) protection circuit design verification is needed for complex ICs at advanced technology nodes, which however is still largely impractical due to the limitation of ESD device models and CAD tools. This paper reports a new circuit-level ESD protection design simulation and dynamic checking method using SPICE and ESD device behavior models, which allows comprehensive, quantitative and dynamic verification of ESD protection circuit designs at chip level based entirely on ESD discharging functions. The new ESD protection circuit simulation method is validated using ICs designed and fabricated in a 28nm CMOS. This ESD-function-based ESD circuit simulation method is technology independent, which can handle various ICs including complex multiple power domain circuits and ICs using non-traditional ESD protection structures.
28 February 2023 in IEEE Journal of the Electron Devices Society
Proliferation of flexible, wearable and portable electronics come with new challenges of system reliability. Particularly, flexible and wearable electronics cause more frequent and are more susceptible to electromagnetic interference (EMI) effects and electrostatic discharge (ESD) failures, and have unique requirements for design-for-reliability (DfR) associated with EMI and ESD immunity to achieve electromagnetic compatibility (EMC) compliance. This paper outlines the key challenges in design for EMI and ESD immunity for wearable microsystems and discusses potential design for EMI/ESD immunity solutions.
8 September 2020 in IEEE Journal of the Electron Devices Society
Charged device model (CDM) electrostatic discharge (ESD) protection remains a huge challenge for integrated circuit (IC) reliability designs. The “internal-oriented” CDM model and the “external-oriented” human body model (HBM) describe fundamentally different ESD phenomena. Through the comprehensive analysis, this paper concludes that the classic pad-based ESD protection methods, commonly used for “from-external-to-internal” HBM ESD protection, are theoretically not working for “from-internal-to-external” CDM ESD protection. It states that the actual internal distribution of static charges within a chip is vitally critical to CDM ESD protection. The discovery explains the potential root cause of the randomness and uncertainty of pad-based CDM ESD protection designs commonly observed today, hence calls for new CDM ESD protection solutions.
17 August 2021 in IEEE Journal of the Electron Devices Society
Electrostatic discharge (ESD) protection is a grand design challenge for complex ICs in advanced technologies. ESD simulation is indispensable to guide ESD protection designs. However, no existing ESD simulation methods may accurately predict ESD protection designs in a universal manner due to various inherent limitations. TCAD-based ESD simulation is very useful for ESD protection designs. Transmission line pulse (TLP) and very fast TLP (VFTLP) are widely used to evaluate human body model (HBM) and charged device model (CDM) ESD protection designs, which provide rich details for calibrating TCAD ESD simulation for design prediction and validation. Using various ESD protection devices fabricated in 28nm CMOS and 45nm SOI CMOS technologies, a comprehensive experimental and simulation study finds that the ESD stimuli used in TCAD ESD design simulation have profound impacts on many subtle ESD protection behaviors, particularly in comparison with ESD testing. This study cautions against over-interpretation of TCAD ESD simulation results, obtained using any specific ESD stimulus, attempting to accurately predict practical ESD protection designs. A mixed-mode multiple-stimuli ESD simulation method is therefore developed to address the ESD stimulus induced ESD performance variation, hence offering a technique to achieve ESD protection design prediction.