Axial-flux permanent-magnet (AFPM) motors are a kind of important motor with compact structure, high power density and high torque density. In this review, the progress of AFPM motors and their key technologies are analyzed and described, with emphasis on the topological structures, design and optimization methods and control techniques. Based on these analyses, the main findings of the review are the following: (1) the yokeless and segment armature (YASA)-type motors have great potential for development; (2) the multi-objective optimization design theories can be integrated and applied to optimize the design of AFPM motors; and (3) optimal control and sensorless control have important value in improving system reliability and reducing cost. Finally, highlights and prospects are provided for further advancing AFPM motors.

The oxygen reduction reaction (ORR) is one of the crucial energy conversion reactions in proton exchange membrane fuel cells (PEMFCs). Low price and remarkable catalyst performance are very important for the cathode ORR of PEMFCs. Among the various explored ORR catalysts, non-noble metals (transition metal: Fe, Co, Mn, etc.) and N co-doped C (M–N–C) ORR catalysts have drawn increasing attention due to the abundance of these resources and their low price. In this paper, the recent advances of single-atom catalysts (SACs) and double-atom catalysts (DACs) in the cathode ORR of PEMFCs is reviewed systematically, with emphasis on the synthesis methods and ORR performance of the catalysts. Finally, challenges and prospects are provided for further advancing non-noble metal catalysts in PEMFCs.

The incentive policies of new energy vehicles substantially promoted the development of the electrical vehicles technology and industry in China. However, the environmental impact of the key technology parameters progress on the battery electrical vehicles (BEV) is uncertain, and the BEV matching different lithium-ion power batteries shows different environmental burdens. This study conducts a life cycle assessment (LCA) of a BEV matching four different power batteries of lithium-ion phosphate (LFP), lithium-ion nickel-cobalt-manganese (NCM), lithium manganese oxide (LMO), and lithium titanate oxide (LTO) batteries. In addition, the 2025 and 2030 prediction analyses of the batteries production and life cycle BEV are conducted with the specially considered change and progress of the power battery energy density, battery manufacturing energy consumption, electricity structure, battery charge efficiency, and vehicle lightweight level. In addition, sensitivity analyses of power battery energy density, battery manufacturing energy consumption, electricity structure, and battery charge efficiency are conducted. The results show that the LFP battery is more environmentally friendly in the global warming potential (GWP) and acidification potential (AP), and the NCM battery is more environmentally friendly in abiotic depletion (fossil) (ADP(f)) and human toxicity potential (HTP). However, the LTO battery shows the highest environmental impact among the four environmental impact categories due to the lower energy density. For life cycle BEV, GWP and ADP(f) of BEV based on LFP, NCM, and LMO are lower than those of internal combustion engine vehicles (ICEV), while AP and HTP of BEV based on the four batteries are higher than those of ICEV. The grave-to-cradle (GTC) phase of vehicle has substantial environmental benefit to reduce the human toxicity emission. With the improvement of the battery density, battery charge efficiency, electricity structure, and glider lightweight level, life cycle BEVs based on the four different batteries show substantial environmental benefits for four environmental impact categories.