Axial-flux permanent-magnet (AFPM) motors are a kind of important motor with compact structure, high power density and high torque density. In this review, the progress of AFPM motors and their key technologies are analyzed and described, with emphasis on the topological structures, design and optimization methods and control techniques. Based on these analyses, the main findings of the review are the following: (1) the yokeless and segment armature (YASA)-type motors have great potential for development; (2) the multi-objective optimization design theories can be integrated and applied to optimize the design of AFPM motors; and (3) optimal control and sensorless control have important value in improving system reliability and reducing cost. Finally, highlights and prospects are provided for further advancing AFPM motors.

The oxygen reduction reaction (ORR) is one of the crucial energy conversion reactions in proton exchange membrane fuel cells (PEMFCs). Low price and remarkable catalyst performance are very important for the cathode ORR of PEMFCs. Among the various explored ORR catalysts, non-noble metals (transition metal: Fe, Co, Mn, etc.) and N co-doped C (M–N–C) ORR catalysts have drawn increasing attention due to the abundance of these resources and their low price. In this paper, the recent advances of single-atom catalysts (SACs) and double-atom catalysts (DACs) in the cathode ORR of PEMFCs is reviewed systematically, with emphasis on the synthesis methods and ORR performance of the catalysts. Finally, challenges and prospects are provided for further advancing non-noble metal catalysts in PEMFCs.

The incentive policies of new energy vehicles substantially promoted the development of the electrical vehicles technology and industry in China. However, the environmental impact of the key technology parameters progress on the battery electrical vehicles (BEV) is uncertain, and the BEV matching different lithium-ion power batteries shows different environmental burdens. This study conducts a life cycle assessment (LCA) of a BEV matching four different power batteries of lithium-ion phosphate (LFP), lithium-ion nickel-cobalt-manganese (NCM), lithium manganese oxide (LMO), and lithium titanate oxide (LTO) batteries. In addition, the 2025 and 2030 prediction analyses of the batteries production and life cycle BEV are conducted with the specially considered change and progress of the power battery energy density, battery manufacturing energy consumption, electricity structure, battery charge efficiency, and vehicle lightweight level. In addition, sensitivity analyses of power battery energy density, battery manufacturing energy consumption, electricity structure, and battery charge efficiency are conducted. The results show that the LFP battery is more environmentally friendly in the global warming potential (GWP) and acidification potential (AP), and the NCM battery is more environmentally friendly in abiotic depletion (fossil) (ADP(f)) and human toxicity potential (HTP). However, the LTO battery shows the highest environmental impact among the four environmental impact categories due to the lower energy density. For life cycle BEV, GWP and ADP(f) of BEV based on LFP, NCM, and LMO are lower than those of internal combustion engine vehicles (ICEV), while AP and HTP of BEV based on the four batteries are higher than those of ICEV. The grave-to-cradle (GTC) phase of vehicle has substantial environmental benefit to reduce the human toxicity emission. With the improvement of the battery density, battery charge efficiency, electricity structure, and glider lightweight level, life cycle BEVs based on the four different batteries show substantial environmental benefits for four environmental impact categories.

This article utilizes the research method of the Life Cycle Assessment (LCA) to scrutinize Lithium Iron Phosphate (LFP) batteries and Ternary Lithium (NCM) batteries. It develops life cycle models representing the material, energy, and emission flows for power batteries, exploring the environmental impact and energy efficiency throughout the life cycles of these batteries. The life cycle assessment results of different power battery recycling process scenarios are compared and analyzed. This study focuses on retired LFP batteries to assess the environmental and energy efficiency during the cascade utilization stage, based on a 50% Single-Cell Conversion Rate (CCR). The findings of the research reveal that, in terms of resource depletion and environmental emission potential, LFP batteries exhibit lower impacts compared to NCM batteries. The use of hydrometallurgy in recovering LFP power batteries leads to minimal life cycle resource consumption and environmental emission potential. During the cascade utilization stage of LFP batteries, significant benefits are noted, including a 76% reduction in mineral resource depletion (ADP e) and an 83% reduction in fossil energy depletion (ADP f), alongside notable reductions in various environmental impact factors. Simultaneously, considering the sensitivity of life cycle assessment indicators and their benefit percentages to different CCRs, it is observed that ODP exhibits the highest sensitivity to CCR changes, while evaluation indicators such as HTP, AP, and GWP show relatively lower sensitivity. This study can provide an effective reference for the establishment of an energy saving and emission reduction evaluation system of power batteries.

This study establishes a life cycle assessment model to quantitively evaluate and predict material resource consumption, fossil energy consumption and environmental emissions of plug-in hybrid electric vehicles (PHEVs) by employing the GaBi software. This study distinguishes the environmental impact of different vehicle working conditions, power battery degradation scenarios, and mileage scenarios on the operation and use stages of PHEVs, BEVs, and HEVs. The findings indicate that under urban, highway, and aggressive driving conditions, PHEVs’ life cycle material resource and fossil fuel consumption exceed that of BEVs but are less than HEVs. Battery degradation leads to increased material resource consumption, energy use, and environmental emissions for both PHEVs and BEVs. When the power battery degrades to 85%, the material resource and fossil energy consumption during the operation and use phase increases by 51.43%, 72.68% for BEVs and 29.37%, 36.21% for PHEVs compared with no degradation, respectively, indicating that the environmental impact of BEVs are more sensitive than those of PHEVs to the impact of power battery degradation. Among different mileage scenarios, PHEVs demonstrate the lowest sensitivity to increased mileage regarding life cycle material resource consumption, with the smallest increase. Future projections for 2025 and 2035 suggest life cycle GWP of HEV, PHEV and BEV in 2035 is 1.21 × 10⁴, 1.12 × 10⁴ and 1.01 × 10⁴ kg CO₂-eq, respectively, which shows reductions of 48.7%, 30.9% and 36.1% compared with those in 2025. The outcomes of this study are intended to bolster data support for the manufacturing and development of PHEV, BEV and HEV under different scenarios and offer insights into the growth and technological progression of the automotive sector.

This study establishes life cycle assessment model to quantitively evaluate and predict material resource consumption, fossil energy consumption and environmental emissions of plug-in hybrid electric vehicles (PHEVs) by employing the GaBi software. the envi-ronmental impact of different vehicle working conditions, power battery degradation scenarios and mileage scenarios on the operation and use stage of PHEV, BEV and HEV is distinguished. The findings indicate that under urban, highway, and aggressive driving conditions, PHEVs' life cycle material resource and fossil fuel consumption exceed that of BEVs but are less than HEVs. Battery degradation leads to increased material resource consumption, energy use, and environmental emissions for both PHEVs and BEVs, en-vironmental emission of BEVs are more sensitive than those of PHEVs to the impact of power battery degradation. Among different-mileage scenarios, PHEVs demonstrate the least sensitivity to increased mileage regarding life cycle material resource consumption, with the smallest increase. Future projections for 2025 and 2035 suggest life cycle GWP of HEV, PHEV and BEV in 2035 is 1.21×104, 1.12×104 and 1.01×104 kg CO2-eq respectively, which is decreased by 48.7%, 30.9% and 36.1% compared with those in 2025. The out-comes of this study are intended to bolster data support for the manufacturing and de-velopment of PHEV, BEV and HEV under different scenarios and offer insights into the growth and technological progression of the automotive sector.