Metasurfaces for molecular detection: Although mid-infrared (mid-IR) spectroscopy is a mainstay of molecular fingerprinting, its sensitivity is diminished somewhat when looking at small volumes of sample. Nanophotonics provides a platform to enhance the detection capability. Tittl et al. built a mid-IR nanophotonic sensor based on reflection from an all-dielectric metasurface array of specially designed scattering elements. The scattering elements could be tuned via geometry across a broad range of wavelengths in the mid-IR. The approach successfully detected and differentiated the absorption fingerprints of various molecules. The technique offers the prospect of on-chip molecular fingerprinting without the need for spectrometry, frequency scanning, or moving mechanical parts. Science , this issue p. 1105

It has been a long-standing challenge to produce air-stable few- or monolayer samples of phosphorene because thin phosphorene films degrade rapidly in ambient conditions. Here we demonstrate a new highly controllable method for fabricating high quality, air-stable phosphorene films with a designated number of layers ranging from a few down to monolayer. Our approach involves the use of oxygen plasma dry etching to thin down thick-exfoliated phosphorene flakes, layer by layer with atomic precision. Moreover, in a stabilized phosphorene monolayer, we were able to precisely engineer defects for the first time, which led to efficient emission of photons at new frequencies in the near infrared at room temperature. In addition, we demonstrate the use of an electrostatic gate to tune the photon emission from the defects in a monolayer phosphorene. This could lead to new electronic and optoelectronic devices, such as electrically tunable, broadband near infrared lighting devices operating at room temperature.

Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

Opening charge transport pathways: In perovskite solar cells, the insulating nature of passivation layers needed to boost open-circuit voltage also increases the series resistance of the cell and limits the fill factor. Most improvements in power conversion efficiency have come from higher open-circuit voltage, with most fill factor improvements reported for very small-area cells. Peng et al. used a nanostructured titanium oxide electron transport layer to boost the fill factor of larger-area cells (1 square centimeter) to 0.84 by creating local regions with high conductivity. Science , this issue p. 390