Contamination associated with metals is a critical concern related to their toxicity, persistence, and bio-accumulation. Trace elements are partitioned into several chemical forms, which some are more labile during fluctuations in the environment. Studying the distribution of metals between the different chemical fractions contributes to assess their bioavailability and to identify their potential risk of contamination to surrounding environments. This study concerns the speciation of metals (Pb, Cr, Ni, Zn and Fe) from sediments coming out from Malmfjärden bay, Sweden. The aim was to assess the potential risk of metal pollution during present and future dredging as well as while using dredged sediments in beneficial uses. The Tessier speciation procedure was chosen, and the results showed that low concentrations of metals were associated with the exchangeable fraction. In contrast, the major concentrations were linked to the residual part. The risk indexes (contamination factor and risk assessment code) showed that, during dredging activities, there is a low concern of pollution for Cr, Ni and Fe and a medium risk for Pb and Zn. Additionally, in all elements, the sum of non-residual concentrations was below the Swedish limits for using dredged sediments in sensitive lands. The findings suggested that the investigated metals in Malmfjärden sediments are related to low risks of spreading during using in beneficial uses.
Dredging of sediments is conducted worldwide to maintain harbours and water bodies. As a result, large amounts of materials generated require proper management and could have useful applications in a circular economy context. The current use of peat as organic material in cultivating plants requires urgent replacement by more sustainable alternatives. In this context, using nutrient-rich sediments generated by dredging could be an attractive option. However, due to contaminants in dredged sediments, more investigations are required. The present study investigated the potential to employ dredged material as a plant-growing substrate to cultivate lettuce (Lactuca sativa). The study employed compost and dredged sediments from Malmfjärden Bay, Sweden, with low and high nutritional content (LN and HN, respectively), with and without polymer (PO) used for dewatering. The tests were carried out under controlled conditions in a greenhouse, and the studied substrates were (% vol): (1) 100 % sediment (100SHN); (2) 50 % sediment +50 % compost (50SLN-50C); (3) 70 % sediment +30 % compost (70SLN-30C); (4) 50 % polymer sediment +50 % compost (50SPO-50C); and (5) 100 % compost (100C). Fertilisers were added to 50SLN-50C and 70SLN-30C during the experiment. Lettuces with the highest weight were harvested from substrates 100C, 50SPO-50C and 50SLN-50C. However, the lettuces only reached a weight of 18.57 ± 4.67 g. The results showed that a main limitation of the growth was probably a lack of aeration of the sediments during sampling and development of the experiment. The low aeration possibly caused a lack of available forms of N in the substrates, hindering the growth. Lettuces harvested from substrates containing sediments presented Cd concentrations slightly overpassing the Swedish thresholds, and the health risk index was marginally exceeding 1. Hence, sediments need to be pre-treated before using them to cultivate edible crops, or they could be employed to cultivate ornamental or bioenergy plants.
Millions of tons of bottom sediments are dredged annually all over the world. Ports and bays need to extract the sediments to guarantee the navigation levels or remediate the aquatic ecosystem. The removed material is commonly disposed of in open oceans or landfills. These disposal methods are not in line with circular-economy goals and additionally are unsuitable due to their legal and environmental compatibility. Recovery of valuables represents a way to eliminate dumping and contributes towards the sustainable extraction of secondary raw materials. Nevertheless, the recovery varies on a case-by-case basis and depends on the sediment components. Therefore, the first step is to analyse and identify the sediment composition and properties. Malmfjärden is a shallow semi-enclosed bay located in Kalmar, Sweden. Dredging of sediments is required to recuperate the water level. This study focuses on characterizing the sediments, pore water and surface water from the bay to uncover possible sediment recovery paths and define the baseline of contamination in the water body. The results showed that the bay had high amounts of nitrogen (170–450 µg L−1), leading to eutrophication problems. The sediments mainly comprised small size particle material (silt, clay and sand proportions of 62 %–79 %, 14 %–20 %, 7 %–17 %, respectively) and had a medium–high level of nitrogen (7400–11 000 mg kg−1). Additionally, the sediments had little presence of organic pollutants and low–medium concentration of metals or metalloids. The characterization of the sediments displays a potential use in less sensitive lands such as in industrial and commercial areas where the sediments can be employed as construction material or as plant-growing substrate (for ornamental gardens or vegetation beside roads).
The management of dredged sediments is a challenging issue since it involves the interconnection of complex economic, social, technical and environmental aspects. The EU LIFE SURE project aimed to apply a more sustainable dredging technique to Malmfjärden Bay in Kalmar/Sweden (a shallow urban water body with a high content of nutrients) and, additionally, it involved beneficial uses for the dredged material, in line with the circular economy concept. To achieve this, a life cycle assessment (LCA) study was carried out to assess the potential environmental impacts associated with two scenarios: sediment landfilling (S1) and soil conditioning (S2). This LCA study also aimed to evaluate and compare the costs related to each scenario. S1 contemplated the construction and operation of the landfill for 100 years, including the collection and discharge of leachate and biogas. S2 included the use of sediments in soils and the avoidance of producing and using fertilisers. Results showed that (S2) soil conditioning (total impact: −6.4 PE) was the scenario with fewer environmental impacts and the best economic evaluation. The S2 scenario was mainly related to the positive environmental savings produced by reducing fertiliser consumption (which also avoided purchase costs). However, S2 was also linked to potential negative effects associated with eutrophication and toxicity categories of impacts due to the possible spread of nutrients and pollutants in terrestrial and aquatic environments. In order to mitigate this problem, the sediments could be pre-treated to reduce their risk of pollution. Moreover, the main impact of the landfilling scenario (S1, total impact: 1.6 PE) was the emission of global warming-contributing gases during the operation of the facility. Implementing the soil conditioning scenario was therefore recommended, in line with the aim of the LIFE SURE project. Finally, it was recommended that LCA studies should be applied more often in the future when selecting beneficial uses for dredged sediments. The decision-making process is facilitated when the positive and negative impacts produced by each handling option are considered.
1 December 2021 in Resources, Environment and Sustainability
This study aims to characterise and discuss the potential use of sediment from the Arkelstorp bay located in the south of Sweden. Sediments from the Arkelstorp bay is collected and analysed on nutrient content, age, and potential contaminants. No organic environmental pollutants are found and the metal content are not elevated but still problematically high. For example, the amount of cadmium per phosphorus is 480 mg Cd kg−1P. However, as the carbon 14-datings showed, the sediment is preindustrial. Therefore, the amount of registered cadmium comes naturally from the surrounding environment. Arkelstorp sediments present the potential to become a source of nutrition in agriculture. The results show that the material is a good source of nutrients, with a nitrogen content of 18 g kg−1dry matter (DM), phosphorus 0.8 g kg−1DM and potassium 2.4 g kg−1DM respectively. However, the metal content is problematic to use the material without any pre-treatment. On the other hand, bioenergy production is expected to increase in the future, where this resource could potentially be helpful for the cultivation of bioenergy crops.