S Sindhu Nachiar

S Sindhu Nachiar


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2022 in Buildings
Verified
Journal Article
Open access
PDF file
BKB. Hemanth Sai Kalyan
B. Hemanth Sai Kalyan
ASAnandh Sekar
Anandh Sekar
SNS Sindhu Nachiar
S Sindhu Nachiar
PRPT Ravichandran
PT Ravichandran
Construction disputes have become a recurrent phenomenon in the industry, due to which progress is halted. From a bird’s eye perspective, the most frequent cause of a dispute might be payment issues. However, when observed keenly, it has an inter-relationship with almost every other cause, such as contractual changes, delays in project completion, compromising on the quality of construction, etc. Therefore, analyzing the factors which cause a dispute is important. It is also essential to understand the interrelationship of the factors. In this study, judicial construction disputes, along with judgements in different domains, were collected. The most frequent causes of disputes are identified among these cases. Sixty-five cases were considered for the analysis, which constitutes the writ petition, response and final judgment. These items were collected to gain the perspective of the petitioners and respondents over the cause of the dispute and the final judgment to analyze the factors responsible for decision-making. Factor analysis is done to find out the influencing factors, interrelationships and similarities of the disputes respectively. Among the 8 major factors identified, a strong, positive correlation was found between Poor Performance related issues and Payment related issues. By performing Principal Component Analysis (PCA), causes were classified into 3 domains based on their variables.

12 October 2022 in Buildings
Verified
Journal Article
Open access
PDF file
KKKowsalya Mahendra Kumar
Kowsalya Mahendra Kumar
SNS Sindhu Nachiar
S Sindhu Nachiar
ASAnandh Sekar
Anandh Sekar
PRPT Ravichandran
PT Ravichandran
The utilization of waste materials in concrete lowers its cost, and this method of dealing with the problem of trash disposal is viewed as the most environmentally friendly. Fly Ash Cenospheres (FAC) are one of the principal wastes produced by coal power stations. The huge volume of FAC produced worldwide has created a sustainability challenge, owing to the potential implications of inappropriate disposal. Using cenospheres in concrete materials would make effective and efficient use of these waste products while also supplementing what the present raw material, such as river sand, can supply for concrete material production. Though the application of FAC in concrete is currently carried out by the construction industry, there is still a lack of understanding about its performance in concrete with Manufactured Sand (M Sand) as fine aggregate. Therefore, in this paper, a comprehensive study explores the concept of adding FAC to M Sand concrete. The properties of fresh and hardened concrete, such as density, workability, compression, split tensile, flexure, and impact resistance after the addition of FAC in volume replacement (0–100% with a difference of 5% at thirteen different ratios) is represented, followed by microstructural analysis. From the results, it can be concluded that strength reduction takes place as FAC content increases from 0–100%, however, the strength is within the target limit of 31.2 N/mm2 of conventional concrete (CC) of grade M25 when the percentage replacement is below 35% of volume. Therefore, reducing the volume of fine aggregate does not negatively affect the strength properties, but also impacts the environmental concern positively with optimum recommendation of 35% of fine aggregate as FAC.

12 January 2023 in Buildings
Verified
Journal Article
Open access
PDF file
YRY. Sivananda Reddy
Y. Sivananda Reddy
ASAnandh Sekar
Anandh Sekar
SNS Sindhu Nachiar
S Sindhu Nachiar
The usage of foam concrete (FC) was extended from being used as a filler material to an alternative concrete due to the effect of conventional concrete on global warming. The diversified perspective on FC as an alternative to conventional concrete is due to its low density (400–1800 kg/m3) and good thermal conductivity, which also results in the reduction of costs in production, labor, and transportation. Generally, FC is produced by adding a pre-made foam to the cement slurry consisting of cement and aggregates. Here, the study was carried out by the addition of a coarse aggregate and foaming agent (i.e., 12%, 6%, 3%, 2%, 1%) at varying percentages in FC to improve the strength characteristics. FC was tested for its physical and mechanical properties. From the experimental results, an Artificial Neural Network (ANN) was developed to predict the strength of FC. The results from training and testing of the Polynomial Regression Analysis model (PRA) through ANN have shown great potential in predicting compression, split tensile, and flexural strength of FC. It was found that the strength of FC is increased with the reduction of foam volume and increase in coarse aggregate volume. However, a strength of 25.6 N/mm2 is achieved when 1% foam and 50% coarse aggregate is used.

2 April 2020 in Materials Today: Proceedings
Verified
Journal Article
Open access
PDF file
SNS Sindhu Nachiar
S Sindhu Nachiar
KSK.S. Satyanarayanan
K.S. Satyanarayanan
MLM. Lakshmipathy
M. Lakshmipathy
Bio mimicry is the examination of nature, its model, system, process and element. It is used to solve human problems by imitating these in an appropriate manner. Biological creatures build amazing structures which support the required function over the duration as needed. Nature can teach us about systems, materials, processes, structures and aesthetics. The mass of the building plays a vital role with the intensity of earthquake. This paper is focused on structural design concept inspired by human skeleton. Structurally, Human body is a stable vertical slender element of frameworks using bones. This key idea is taken were humerus as the adaption model for tie member. In this paper, the behaviour of human bone is studied using F.E.A (finite element analysis). The human bone is efficient in resisting compressive and tensile force. The modelling of real proximal human humerus bone is done using MIMICS and is analyzed in ANSYS under various boundary conditions. Five different shapes (Rectangle, Rectangle cross section with Parabolic curve, Rectangle cross section with Circular curve, Circular cross section and Rectangle with Hollow) of tension member which is similar the bone is modelled and analyzed. The stress pattern of real bone and the models were compared and studied. Rectangle cross section with circular curve and rectangular cross section with parabolic curve is found to be the best fit model based on the percentage of maximum stress area. Twenty shapes of models have been derived taking the rectangle circular as the reference model. A particular configuration after iteration with M40 grade of concrete is found suitable. Displacement, Stiffness, Stress and Volume of concrete were the parameters considered to define the optimised model. The model is found optimised for a tension member based on the shape and the stress pattern.

28 August 2024 in Engineering Research Express
Verified
Journal Article
Closed access
SMSheik Mastan
Sheik Mastan
ASAnandh Sekar
Anandh Sekar
SNS Sindhu Nachiar
S Sindhu Nachiar
Openings are provided in Composite steel-concrete beams (CB) for the allowance of ducts and pipes, which generally reduces the beam’s flexural performance. So, to retain the strength of these beams, stiffeners are introduced adjacent to the web openings. Hence, a numerical study is performed to evaluate the influence of the stiffeners next to web openings through finite element analysis (FEA) software ABAQUS v6.14. Three different shapes of openings with three different placements of stiffeners are considered for the study, namely circular, rectangular, and triangular openings with stiffeners along longitudinal, transverse, and diagonal directions. As revealed from the findings of FEA, comparisons are made based on the ultimate load, stiffness, and stress distribution. From comparisons, it is found that double-sided longitudinal and transverse stiffeners next to the circle opening are comparable to conventional CB. Similarly, Diagonal stiffeners increase strength in rectangular and triangle openings. Transverse stiffeners failed to increase load capacity and decrease stress concentration compared to other longitudinal and diagonal stiffeners. Further validation for the finite element results is done using the Levenberg–Marquardt (LM) algorithm, using the backpropagation variant technique of Artificial Neural Network (ANN). The results of ANN, i.e., Mean Square Error (MSE) and Multiple Determination Coefficient (R2), are above 0.9 and below 1, respectively. Thus, the results of ANN indicate that the provided results are perfectly fit for predicting with the ANN technique.

5 March 2024 in Structural Concrete
Verified
Journal Article
Closed access
KKKowsalya Mahendra Kumar
Kowsalya Mahendra Kumar
SSSindhu Nachiar S
Sindhu Nachiar S
ASAnandh S
Anandh S