Aging diesel fuel in emergency storage tanks at nuclear power plants requires regular filtration to remove impurities. Due to the stringent safety requirements of nuclear power plants, high standards are set for operational timeliness and reliability. This study proposes an efficient optimization framework that integrates MATLAB-based genetic algorithm optimization, state-space networks (SSNs), and computational fluid dynamics (CFD). A FLUENT simulation model is used to simulate the internal flow field of the diesel storage tank, while the SSN comprehensively analyzes flow distribution and filtration path strategies. Global parameter optimization is achieved using a genetic algorithm (GA). The framework improves filtration efficiency by 7.9%, reducing filtration time from 464,000 s to 417,600 s. Water impurity levels decreased by 22.2% (from 0.00045 to 0.00035), and mechanical impurities decreased by 33.3% (from 0.000015 to 0.000010). The findings not only enhance the reliability of emergency diesel generator systems and support nuclear safety operations but also provide a solid foundation for further innovations in emergency fuel filtration technologies.
Piston engines are the core power units of large unmanned aerial vehicles (UAVs), and the characteristics of their thermal-fluid working processes directly affect the power performance and operational reliability of UAVs. To address the difficulty of simultaneously ensuring simulation accuracy and computational efficiency in conventional piston engine models, a lightweight simulation method for the thermal-fluid modeling of piston engines is proposed. A Rotax 915 piston engine for large UAVs was selected as the target engine. A one-dimensional thermal-fluid working process model was first established in GT-Power, and a Kriging surrogate model was then constructed to develop a lightweight simulation framework, enabling the fast and accurate prediction of key engine response parameters. The proposed framework enables the rapid prediction of engine performance, propeller load, and lubrication responses under UAV mission-related operating conditions. The surrogate model delivered favorable prediction accuracy against the GT-Power model (R2 > 0.95, MAPE < 5%); flight data verification (excluding cold start) presented a MAPE of 11% and 27% for exhaust gas temperature and lubricating oil pressure, respectively. The proposed lightweight model was validated against actual UAV flight data, and the results show that it can effectively capture the variation trends of exhaust gas temperature and lubricating oil pressure. Further simulation results indicate that with increasing altitude, engine power decreases whereas brake specific fuel consumption (BSFC) increases. With increasing engine speed, engine power increases, BSFC decreases, and lubricating oil pressure declines. Under different flight phases, the takeoff phase shows the highest engine power and BSFC, the cruise phase corresponds to the maximum propeller torque and thrust, and the descent phase exhibits the lowest overall load level. The results provide a useful basis for performance evaluation, condition monitoring, and digital-twin-oriented modeling of piston engines for large UAVs.
Emergency diesel is prone to degradation during long-term storage, and experimental evaluations are costly and slow. Three-dimensional computational fluid dynamics (CFD) simulations were employed to model the diesel conditioning process. A physical model based on the actual dimensions of the storage tank was constructed. The volume of fraction (VOF) model tracked the gas–liquid interface, and the species transport model handled mixture transport. A UDF then recorded inlet and outlet flow rates and velocities in each cycle. The study focused on the effects of different baffle structures and numbers on conditioning efficiency. Results showed that increasing the baffle flow area significantly delays the mixing time but reduces the cycle time. Openings at the bottom of baffles effectively mitigate the accumulation of high-concentration conditioning oil caused by density differences. Increasing the number of baffles decreases the effective volume of the tank and amplifies density differences across the baffles, which shortens the mixing time. However, excessive baffle numbers diminish these benefits. These findings provide essential theoretical guidance for optimizing baffle design in practical diesel tanks, facilitating rapid achievement of emergency diesel quality standards while reducing costs and improving efficiency.
To enhance the oxidative stability of aging diesel fuel stored in nuclear power emergency systems, we propose a novel hybrid optimization framework that integrates a Genetic Algorithm (GA), State-Space Network (SSN) modeling, and Computational Fluid Dynamics (CFD) simulation. Unlike previous studies that address treatment efficiency, flow optimization, or simulation separately, our method achieves real-time, simulation-informed optimization by embedding CFD-based performance evaluation directly into the GA fitness function. The SSN is employed to construct a comprehensive superstructure of feasible conditioning paths, which are dynamically explored and optimized by the GA under flow and boundary constraints. The CFD model, implemented via Ansys Fluent, accurately simulates the antioxidant mixing process in the tank and provides feedback on concentration uniformity at key monitoring points. The results demonstrate that the proposed framework reduces the conditioning time by 5.38% and significantly enhances the additive distribution uniformity. This work offers a generalizable approach for intelligent diesel upgrading in high-reliability energy systems and contributes a structured pathway for integrating data-driven optimization with physical process simulation.