Shuping Che

Dr. Shuping Che


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2025 in Energies
Verified
Journal Article
Open access
PDF file
NLNan Li
Nan Li
MWMingchang Wang
Mingchang Wang
PLPengpeng Li
Pengpeng Li
SCShuping Che
Shuping Che
liang xingyuliang xingyu
liang xingyu
YHYongdi He
Yongdi He
Accelerated oxidation experiments on Chinese 0# diesel fuel were performed with a self-designed aging reactor system. Five experimental conditions covering pressures ranging from atmospheric pressure to 0.8 MPa, temperatures ranging from room temperature (25 °C) to 80 °C, and their synergistic effects were adopted to simulate the long-term oxidation of diesel fuel. The extent of deterioration was evaluated based on the measurement of three key indicators, i.e., oxidation stability, wear scar diameter, and viscosity. Thermogravimetric analysis (TGA) tests were performed, and the measured thermogravimetric (TG) curves and derivative thermogravimetric (DTG) curves were used to evaluate the effects of reactor material, heating rate, bath gas, and reactive gas on the deterioration and vaporization processes of diesel fuel. Based on a comparison of the deterioration indicators of diesel fuel collected from the accelerated oxidation experiments and oil depots serving actual operating emergency diesel generators (EDGs), a rapid assessment method of real-time diesel deterioration was explored. Based on the experimental observations, the affecting mechanisms of the increases in temperature and oxygen partial pressure were discussed. Two test methods of accelerated oxidation, with the respective conditions of 0.8 MPa/80 °C and atmospheric pressure/80 °C, were proposed, which could effectively compress the time needed for long-term storage simulations (e.g., 200 h lab aging equals three years of actual operation). The optional temperature and pressure windows for acceleration oxidation were confirmed (40–80 °C/0.3–0.8 MPa). These results are valuable for the further understanding of the processes of deterioration and vaporization of diesel fuel.

13 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NLNan Li
Nan Li
HRHebin Ren
Hebin Ren
XYXiaohu Yang
Xiaohu Yang
LZLanqi Zhang
Lanqi Zhang
SCShuping Che
Shuping Che
WYWennian Yu
Wennian Yu
Piston engines are the core power units of large unmanned aerial vehicles (UAVs), and the characteristics of their thermal-fluid working processes directly affect the power performance and operational reliability of UAVs. To address the difficulty of simultaneously ensuring simulation accuracy and computational efficiency in conventional piston engine models, a lightweight simulation method for the thermal-fluid modeling of piston engines is proposed. A Rotax 915 piston engine for large UAVs was selected as the target engine. A one-dimensional thermal-fluid working process model was first established in GT-Power, and a Kriging surrogate model was then constructed to develop a lightweight simulation framework, enabling the fast and accurate prediction of key engine response parameters. The proposed framework enables the rapid prediction of engine performance, propeller load, and lubrication responses under UAV mission-related operating conditions. The surrogate model delivered favorable prediction accuracy against the GT-Power model (R2 > 0.95, MAPE < 5%); flight data verification (excluding cold start) presented a MAPE of 11% and 27% for exhaust gas temperature and lubricating oil pressure, respectively. The proposed lightweight model was validated against actual UAV flight data, and the results show that it can effectively capture the variation trends of exhaust gas temperature and lubricating oil pressure. Further simulation results indicate that with increasing altitude, engine power decreases whereas brake specific fuel consumption (BSFC) increases. With increasing engine speed, engine power increases, BSFC decreases, and lubricating oil pressure declines. Under different flight phases, the takeoff phase shows the highest engine power and BSFC, the cruise phase corresponds to the maximum propeller torque and thrust, and the descent phase exhibits the lowest overall load level. The results provide a useful basis for performance evaluation, condition monitoring, and digital-twin-oriented modeling of piston engines for large UAVs.