According to the special working condition in the commutation region of the traction grid, a novel technique of online core-loss measurement for the electric locomotive onboard traction transformer is proposed to noninvasively monitor the status of the magnetic core in real time. Meanwhile, a new modeling approach is also put forward for the equivalent nonlinear magnetizing inductance L M of the magnetic core. First, a no-load test under 31 kV is implemented on a healthy traction transformer, and the measured transient terminal voltages and currents are then filtered and down-sampled by the comprehensive test and fault diagnosis system of electric locomotive traction transformer. Next, the magnetizing inductance L M is modeled as the ratio of “the derivative of main flux linkage λ p with respect to time” over “the derivative of magnetizing current i m with respect to time.” After that the proposed L M model is verified by comparing with the experimental results and two other models. Finally, the proposed technique for online estimation of core loss is applied on a normal onboard traction transformer and a downscaled testing transformer with different severity of interlaminar fault. The experimental results approximately match the theoretical calculation, and the online estimated values of core loss show sharply rising trend under incipient fault.
As one of the machines widely used in mining, a semi-autogenous grinding (SAG) mill can significantly improve the roughing efficiency of rock. But the SAG mill still faces the obstacles of significant energy consumption and empirical operation parameters. In order to obtain the optimal operation parameters of a SAG mill, in this paper, the discrete element method (DEM) is used to simulate the breakage process of the particles by controlling three parameters, i.e., the mill speed ratio, the mill fill level ratio, and the steel ball ratio. This method simulates the particles size, mill power, and qualified particles quality of crushed particle, which reveal the grinding strength and energy consumption of the SAG mill. In this paper, the grinding changes of a SAG mill under different parameter conditions are explored. Firstly, an experiment on the influence of a single parameter change on the mill’s operation is set up, and then the influence of three parameter changes on the mill’s operation is analyzed. These changes are characterized by particle size and mill power. Simulation results under the 5250 × 500 mm mill model show that the mill operates with the optimal effect when the mill is under the condition of 80% critical speed and 15% fill level; the power of the mill does not increase linearly with an increase in the mill speed ratio, but will decrease after 85% of the critical speed, and finally increase again; the optimal steel ball ratio in the SAG mill depends on the simulation time (mill actual working time) and the limitation of the rated power. The mill speed, fill level ratio, and steel ball ratio can significantly affect mill operation, and our conclusions can provide a reference for an actual situation.
1 March 2022 in Journal of Renewable and Sustainable Energy
The molten-salt heat exchanger is a critical heat transfer device used in concentrated solar power systems. In this paper, molten salt heat-transfer performance characteristics and flow resistances in shell and tube heat exchangers with perforated baffles with a notch height of 0.25D (D is the baffle diameter) are simulated. Four opening schemes that use the same opening area (10% of the baffle area) are designed. The numerical results show that the baffle holes can shrink the molten salt flow dead zone significantly and greatly decrease the flow resistance on the shell side at the cost of a slight reduction in the heat-transfer performance. The comprehensive performance of each scheme after opening is higher than that before opening, and the comprehensive performance of Scheme 4 is the best. Next, a genetic algorithm is used to optimize the Scheme 4 opening diameter. The results show that the heat-flux density on the molten-salt side reaches a maximum of 17327 W/m2 when the opening diameter is 2.24 mm. We find that the opening diameter should be maximized to optimize the comprehensive performance at a given pump power. Finally, the data are compared to other correlations. The deviation decreases gradually as the Reynolds number increases. This is because the turbulence enhancement caused by structural change is not substantial at high Reynolds numbers.
The presence of unknown heavy-tailed noise can lead to inaccuracies in measurements and processes, resulting in instability in nonlinear systems. Various estimation methods for heavy-tailed noise exist. However, these methods often trade estimation accuracy for algorithm complexity and parameter sensitivity. To tackle this challenge, we introduced an improved variational Bayesian (VB)-based adaptive iterative extended Kalman filter. In this VB framework, the inverse Wishart distributionis used as the prior for the state prediction covariance matrix. The system state and noise parameter posterior distributions are then iteratively updated for adaptive estimation. Furthermore, we make adaptive adjustments to the IEKF filter parameters to enhance sensitivity and filtering accuracy, thus ensuring robust prediction estimation. A two-dimensional target tracking and nonlinear numerical UNGM simulation validated our algorithm. Compared to existing algorithms RKF-ML and GA-VB, our method showed significant improvements in and , with increases of 21.81% and 22.11% respectively, and a 49.04% faster convergence speed. These results highlight the method’s reliability and adaptability.
In order to suppress the negative influence of common mode voltage (CMV) in the permanent magnet synchronous motor (PMSM) control system, a feasible modulation method in the system, the improved AZSPWM3-4 algorithm, is proposed by analyzing and comparing the advantages and disadvantages of the existing non-zero vector pulse width modulation (NZPWM) strategy. In one control cycle, V3 is used to synthesize the reference vector, avoiding the employment of the zero vector, thus reducing the common mode voltage (CMV). In comparison with the traditional space vector pulse width modulation (SVPWM), the algorithm has the same modulation range and great dynamic and stable performance in the permanent magnet synchronous motor control system. In addition, it can reduce the amplitude of common mode voltage (CMV) from Udc/2 to Udc/6. The feasibility and stability of this method have been proved by comparing with existing modulation methods and the experimental results.
1 November 2023 in Journal of Renewable and Sustainable Energy
Addressing the issue of flow dead zones in molten salt heat exchangers in concentrating solar power generation systems, this study focuses on the conventional shell and tube heat exchanger using molten salt and heat transfer oil as the working medium. The flow dynamics of molten salt within the heat exchanger are analyzed. To quantify the volume fraction of the molten salt flow dead zones, the residence time distribution curve is employed. Four baffle salt flow configurations are comparatively assessed. Findings indicate that the four opening configurations effectively enhance the reduction of molten salt flow dead zones, with volume fraction reductions ranging from 57.8% to 68.21%. Notably, configuration 4 yields the most optimal results. Furthermore, molten salt flow states in varying regions were examined: the innermost flow dead zone exhibited the highest improvement, followed by the middle area, with the edge area showing the least enhancement. Additionally, the impact of the opening diameter on the flow dead zone was explored. The volume fraction of the molten salt flow dead zone diminishes as the opening diameter expands, with the rate of this change also decelerating. Given that molten salt at the opening manifests as a jet, enlarging the opening diameter lessens the pressure differential across the baffle, subsequently weakening the jet's intensity and its influence on the flow dead zone.