This article presents a literature review from 2018–2024 on the issues related to the functionalization and stability of nanocellulose from palm oil biomass. The nanocellulose isolation process, methods for assessing stability and ways to increase it, as well as potential applications are discussed in detail. Emphasis is placed on the commercialization possibilities of nanocellulose-based products, with a view to developing engineering of advanced nanomaterials derived from oil palm biomass .
Industrial wastewater includes large amounts of contaminants thus, the wastewater must be treated prior to disposal. Moreover, since a substantial volume of wastewater is generated, environmental considerations should include the reutilizing of reclaimed water. Since industrial wastewater consists mostly of chemicals and persistent contaminants, it must be adequately treated with eco-friendly technology. Membrane technologies, specifically membrane distillation, are frequently employed in the treatment of industrial wastewater due to their significant benefits over typical wastewater remediation approaches. The substantial investigation completed to date has been undertaken on a lab scale, however, both full and pilot-scale practices have already been implemented progressively. This study presents a concise overview of industrial wastewater treatment and its utilization following proper handling by membrane processes in both full and pilot-scale relevance. In addition, the future prospects and existing obstacles for membrane processes, including cleansing techniques and financial impact, are also studied. In addition, given that there are fewer full-scale trials than pilot-scale studies, process flaws are highlighted to facilitate future research investigations.
Hybrid nanofluids based on surface-modified anionic cellulose nanoparticles (ACNPs) and metal oxide nanoparticles (Al₂O₃, ZnO, TiO₂, MgO) were developed to improve the dispersion stability and thermal conductivity of aqueous systems. The hybrid nanocomposites were synthesized using ACNPs and then introduced into water (1 wt%) with added polyvinylpyrrolidone (PVP) using a two-step method. The stability of the aqueous systems was assessed based on visual observations and zeta potential measurements. Density, viscosity, thermal conductivity, and specific heat were also determined. The ZnO-based nanofluid demonstrated the most favorable properties, remaining stable for over 60 days and exhibiting thermal conductivity 109% and 81% higher at 45°C and 65°C compared to water, respectively. In contrast, the MgO system was characterized by high viscosity and long-term visual stability, but there was a smaller increase in thermal conductivity.
This study investigates the treatment of natural zeolite clinoptilolite (NZC) through acid and base pretreatments, aiming to enhance its adsorption efficiency for methylene blue (MB) dye removal. The results indicate that NZC treated with 3.0 M HCl (hydrochloric acid) exhibits superior MB removal efficiency (93.24 %) compared to 1.0 M NaOH (sodium hydroxide)-treated NZC (91.40 %), accompanied by a higher Brunauer–Emmett–Teller (BET) surface area (135.5002 m2/g) in contrast to (43.6059 m2/g). The optimized 3.0 M HCl-treated NZC is further functionalized with curcumin, resulting in CUR-HCl-NZC, which demonstrates enhanced MB removal efficiencies of 95.09 % at 45 min and 83.81 % at 90 min, surpassing untreated NZC. The adsorption parameters, including contact time (45 min), adsorbent dosage (0.2 g), and initial dye concentration (25 ppm), are systematically varied to optimize the conditions for CUR-HCl-NZC. Characterization through Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and BET analysis confirm the successful binding of curcumin to HCl-treated NZC, revealing structural and surface modifications. BET analysis shows that the surface area of CUR-HCl-NZC is 100.0382 m2/g, indicating changes in porosity due to curcumin modifications. The isotherm analysis identifies the Langmuir isotherm model as the best fit, with a correlation coefficient (R2) of 0.9996 and adsorption capacity of 41.203 mg/g, suggesting monolayer adsorption dominance. This study establishes CUR-HCl-NZC as an effective, low-cost adsorbent for the removal of MB, offering a promising solution for water purification applications.